WV-3459 Charting Release

config/default/common/config/metadata/layers/multi-mission/hls/HLS_Color_Infrared_Landsat.md

@@ -4,6 +4,10 @@ The dynamically generated Reflectance (Bands 5-4-3, False Color) imagery layer i
 
 The Reflectance imagery layer from Landsat 8 and 9/OLI product (L30) is available through the HLS project from the Operational Land Imager (OLI) aboard the Landsat 8 and 9 satellites. The sensor resolution is 30 m, imagery resolution is 30 m, and the temporal resolution is daily with an 8 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Sentinel-2A and Sentinel-2B imagery layer available.
 
-This imagery layer is provided dynamically through the [NASA Interagency Implementation and Advanced Concepts Team (IMPACT)](https://www.earthdata.nasa.gov/about/impact). As it is dynamically generated, it may take slightly longer to display than normal. The imagery is also only available at higher zoom levels.
+Landsat 9 launched on September 21, 2021 and was subsequently added to the HLS product, availability of imagery from Landsat 8 and Landsat 9 is as follows:
+- Landsat 8: April 11, 2013 - Present
+- Landsat 9: May 31, 2022 - Present
+
+This imagery layer is provided dynamically through the [NASA Interagency Implementation and Advanced Concepts Team (IMPACT)](https://www.earthdata.nasa.gov/about/impact). As it is dynamically generated, it may take slightly longer to display than normal. The imagery is only available at higher zoom levels.
 
 References: HLSL30 v002 [doi:10.5067/HLS/HLSL30.002](https://doi.org/10.5067/HLS/HLSL30.002)

config/default/common/config/metadata/layers/multi-mission/hls/HLS_Color_Infrared_Sentinel.md

@@ -2,8 +2,13 @@
 
 The dynamically generated Reflectance (Bands 8-4-3, False Color) imagery layer is a false color composite that is used to gauge plant health and assess plant density. Plants reflect in near infrared and green light, while absorbing in red. reas with better vegetation health appear red, and denser plant growth is a darker red. Cities, urban areas, and exposed ground appear grey or tan and water is blue or black.
 
-The Reflectance imagery layer from Sentinel-2A and -2B/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A and Sentinel-2B satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
+The Reflectance imagery layer from Sentinel-2\/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
 
-This imagery layer is provided dynamically through the [NASA Interagency Implementation and Advanced Concepts Team (IMPACT)](https://www.earthdata.nasa.gov/about/impact). As it is dynamically generated, it may take slightly longer to display than normal. The imagery is also only available at higher zoom levels.
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
+- Sentinel-2A: November 28, 2015 to January 22, 2025
+- Sentinel-2B: September 18, 2017 to Present
+- Sentinel-2C: January 21, 2025 to Present
+
+This imagery layer is provided dynamically through the [NASA Interagency Implementation and Advanced Concepts Team (IMPACT)](https://www.earthdata.nasa.gov/about/impact). As it is dynamically generated, it may take slightly longer to display than normal. The imagery is only available at higher zoom levels.
 
 References: HLSS30 v002 [doi:10.5067/HLS/HLSS30.002](https://doi.org/10.5067/HLS/HLSS30.002)

config/default/common/config/metadata/layers/multi-mission/hls/HLS_Customizable_Landsat.md

@@ -4,6 +4,10 @@ This Reflectance imagery layer can be customized to display any available Red-Gr
 
 The Reflectance imagery layer from Landsat 8 and 9/OLI product (L30) is available through the HLS project from the Operational Land Imager (OLI) aboard the Landsat 8 and 9 satellites. The sensor resolution is 30 m, imagery resolution is 30 m, and the temporal resolution is daily with an 8 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Sentinel-2A and Sentinel-2B imagery layer available.
 
-This imagery layer is provided dynamically through the [NASA Interagency Implementation and Advanced Concepts Team (IMPACT)](https://www.earthdata.nasa.gov/about/impact). As it is dynamically generated, it may take slightly longer to display than normal. The imagery is also only available at higher zoom levels.
+Landsat 9 launched on September 21, 2021 and was subsequently added to the HLS product, availability of imagery from Landsat 8 and Landsat 9 is as follows:
+- Landsat 8: April 11, 2013 - Present
+- Landsat 9: May 31, 2022 - Present
+
+This imagery layer is provided dynamically through the [NASA Interagency Implementation and Advanced Concepts Team (IMPACT)](https://www.earthdata.nasa.gov/about/impact). As it is dynamically generated, it may take slightly longer to display than normal. The imagery is only available at higher zoom levels.
 
 References: HLSL30 v002 [doi:10.5067/HLS/HLSL30.002](https://doi.org/10.5067/HLS/HLSL30.002)

config/default/common/config/metadata/layers/multi-mission/hls/HLS_Customizable_Sentinel.md

@@ -4,6 +4,11 @@ This Reflectance imagery layer can be customized to display any available Red-Gr
 
 The Reflectance imagery layer from Sentinel-2A and Sentinel-2B/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A and Sentinel-2B satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
 
-This imagery layer is provided dynamically through the [NASA Interagency Implementation and Advanced Concepts Team (IMPACT)](https://www.earthdata.nasa.gov/about/impact). As it is dynamically generated, it may take slightly longer to display than normal. The imagery is also only available at higher zoom levels.
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
+- Sentinel-2A: November 28, 2015 to January 22, 2025
+- Sentinel-2B: September 18, 2017 to Present
+- Sentinel-2C: January 21, 2025 to Present
+
+This imagery layer is provided dynamically through the [NASA Interagency Implementation and Advanced Concepts Team (IMPACT)](https://www.earthdata.nasa.gov/about/impact). As it is dynamically generated, it may take slightly longer to display than normal. The imagery is only available at higher zoom levels.
 
 References: HLSS30 v002 [doi:10.5067/HLS/HLSS30.002](https://doi.org/10.5067/HLS/HLSS30.002)

config/default/common/config/metadata/layers/multi-mission/hls/HLS_EVI_Landsat.md

@@ -16,6 +16,10 @@ The image is applied with a divergent blue-green to brown color palette. It depi
 
 The Reflectance imagery layer from Landsat 8 and 9/OLI product (L30) is available through the HLS project from the Operational Land Imager (OLI) aboard the Landsat 8 and 9 satellites. The sensor resolution is 30 m, imagery resolution is 30 m, and the temporal resolution is daily with an 8 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Sentinel-2A and Sentinel-2B imagery layer available.
 
-This imagery layer is provided dynamically through the [NASA Interagency Implementation and Advanced Concepts Team (IMPACT)](https://www.earthdata.nasa.gov/about/impact). As it is dynamically generated, it may take slightly longer to display than normal. The imagery is also only available at higher zoom levels.
+Landsat 9 launched on September 21, 2021 and was subsequently added to the HLS product, availability of imagery from Landsat 8 and Landsat 9 is as follows:
+- Landsat 8: April 11, 2013 - Present
+- Landsat 9: May 31, 2022 - Present
+
+This imagery layer is provided dynamically through the [NASA Interagency Implementation and Advanced Concepts Team (IMPACT)](https://www.earthdata.nasa.gov/about/impact). As it is dynamically generated, it may take slightly longer to display than normal. The imagery is only available at higher zoom levels.
 
 References: HLSL30 v002 [doi:10.5067/HLS/HLSL30.002](https://doi.org/10.5067/HLS/HLSL30.002)

config/default/common/config/metadata/layers/multi-mission/hls/HLS_EVI_Sentinel.md

@@ -14,7 +14,12 @@ It incorporates an “L” value to adjust for canopy background, “C” values
 
 The image is applied with a divergent blue-green to brown color palette. It depicts areas with a lot of green leaf growth, indicating the presence of chlorophyll, in dark green colors. Chlorophyll reflects more infrared light and less visible light. Areas with some green leaf growth are in light yellows, and areas with little to no vegetation growth are in shades of brown.
 
-The Reflectance imagery layer from Sentinel-2A and Sentinel-2B/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A and Sentinel-2B satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
+The Reflectance imagery layer from Sentinel-2/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
+
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
+- Sentinel-2A: November 28, 2015 to January 22, 2025
+- Sentinel-2B: September 18, 2017 to Present
+- Sentinel-2C: January 21, 2025 to Present
 
 This imagery layer is provided dynamically through the [NASA Interagency Implementation and Advanced Concepts Team (IMPACT)](https://www.earthdata.nasa.gov/about/impact). As it is dynamically generated, it may take slightly longer to display than normal. The imagery is only available at higher zoom levels.
 

config/default/common/config/metadata/layers/multi-mission/hls/HLS_False_Color_Landsat.md

@@ -4,6 +4,10 @@ The dynamically generated Reflectance (Bands 5-4-3, Color Infrared) imagery laye
 
 The Reflectance imagery layer from Landsat 8 and 9/OLI product (L30) is available through the HLS project from the Operational Land Imager (OLI) aboard the Landsat 8 and 9 satellites. The sensor resolution is 30 m, imagery resolution is 30 m, and the temporal resolution is daily with an 8 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Sentinel-2A and Sentinel-2B imagery layer available.
 
-This imagery layer is provided dynamically through the [NASA Interagency Implementation and Advanced Concepts Team (IMPACT)](https://www.earthdata.nasa.gov/about/impact). As it is dynamically generated, it may take slightly longer to display than normal. The imagery is also only available at higher zoom levels.
+Landsat 9 launched on September 21, 2021 and was subsequently added to the HLS product, availability of imagery from Landsat 8 and Landsat 9 is as follows:
+- Landsat 8: April 11, 2013 - Present
+- Landsat 9: May 31, 2022 - Present
+
+This imagery layer is provided dynamically through the [NASA Interagency Implementation and Advanced Concepts Team (IMPACT)](https://www.earthdata.nasa.gov/about/impact). As it is dynamically generated, it may take slightly longer to display than normal. The imagery is only available at higher zoom levels.
 
 References: HLSL30 v002 [doi:10.5067/HLS/HLSL30.002](https://doi.org/10.5067/HLS/HLSL30.002)

config/default/common/config/metadata/layers/multi-mission/hls/HLS_False_Color_Sentinel.md

@@ -2,7 +2,12 @@
 
 The dynamically generated Reflectance (Bands 8-4-3, Color Infrared) imagery layer is a false color composite that is used to gauge plant health and assess plant density. Plants reflect in near infrared and green light, while absorbing in red. Areas with better vegetation health appear red, and denser plant growth is a darker red. Cities, urban areas, and exposed ground appear grey or tan and water is blue or black.
 
-The Reflectance imagery layer from Sentinel-2A and Sentinel-2B/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A and Sentinel-2B satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
+The Reflectance imagery layer from Sentinel-2/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
+
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
+- Sentinel-2A: November 28, 2015 to January 22, 2025
+- Sentinel-2B: September 18, 2017 to Present
+- Sentinel-2C: January 21, 2025 to Present
 
 This imagery layer is provided dynamically through the [NASA Interagency Implementation and Advanced Concepts Team (IMPACT)](https://www.earthdata.nasa.gov/about/impact). As it is dynamically generated, it may take slightly longer to display than normal. The imagery is only available at higher zoom levels.
 

config/default/common/config/metadata/layers/multi-mission/hls/HLS_False_Color_Urban_Landsat.md

@@ -4,6 +4,10 @@ The dynamically generated Reflectance (Bands 7-6-4, Urban False Color) imagery l
 
 The Reflectance imagery layer from Landsat 8 and 9/OLI product (L30) is available through the HLS project from the Operational Land Imager (OLI) aboard the Landsat 8 and 9 satellites. The sensor resolution is 30 m, imagery resolution is 30 m, and the temporal resolution is daily with an 8 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Sentinel-2A and Sentinel-2B imagery layer available.
 
-This imagery layer is provided dynamically through the [NASA Interagency Implementation and Advanced Concepts Team (IMPACT)](https://www.earthdata.nasa.gov/about/impact). As it is dynamically generated, it may take slightly longer to display than normal. The imagery is also only available at higher zoom levels.
+Landsat 9 launched on September 21, 2021 and was subsequently added to the HLS product, availability of imagery from Landsat 8 and Landsat 9 is as follows:
+- Landsat 8: April 11, 2013 - Present
+- Landsat 9: May 31, 2022 - Present
+
+This imagery layer is provided dynamically through the [NASA Interagency Implementation and Advanced Concepts Team (IMPACT)](https://www.earthdata.nasa.gov/about/impact). As it is dynamically generated, it may take slightly longer to display than normal. The imagery is only available at higher zoom levels.
 
 References: HLSL30 v002 [doi:10.5067/HLS/HLSL30.002](https://doi.org/10.5067/HLS/HLSL30.002)

config/default/common/config/metadata/layers/multi-mission/hls/HLS_False_Color_Urban_Sentinel.md

@@ -2,9 +2,13 @@
 
 The dynamically generated Reflectance (Bands 12-11-4, Urban False Color) imagery layer is useful for visualizing urban areas more clearly. Urban areas are white, grey, or purple and vegetation appear in shades of green. Snow and ice are dark blue, and water is black or blue. Flooded areas are very dark blue, sometimes black. Wildfires and lava in calderas of volcanoes display in shades of yellow and red.
 
+The Reflectance imagery layer from Sentinel-2/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
 
-The Reflectance imagery layer from Sentinel-2A and Sentinel-2B/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A and Sentinel-2B satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
+- Sentinel-2A: November 28, 2015 to January 22, 2025
+- Sentinel-2B: September 18, 2017 to Present
+- Sentinel-2C: January 21, 2025 to Present
 
-This imagery layer is provided dynamically through the [NASA Interagency Implementation and Advanced Concepts Team (IMPACT)](https://www.earthdata.nasa.gov/about/impact). As it is dynamically generated, it may take slightly longer to display than normal. The imagery is also only available at higher zoom levels.
+This imagery layer is provided dynamically through the [NASA Interagency Implementation and Advanced Concepts Team (IMPACT)](https://www.earthdata.nasa.gov/about/impact). As it is dynamically generated, it may take slightly longer to display than normal. The imagery is only available at higher zoom levels.
 
 References: HLSS30 v002 [doi:10.5067/HLS/HLSS30.002](https://doi.org/10.5067/HLS/HLSS30.002)