2. Parts

• PCB (Gerber files provided)
  • [1x] FBI Board, 2-layer, 1.6mm - Link
  • [1x] TMU Board, 2-layer, 1.6mm - Link
  • [8x] RAM Module Board, 4-layer, 1.6mm - Link

• Pin Headers
  • [8x] Pin header, 2x20P, male, 1.27mm pitched, double row, through hole - Link
  • [8x] Pin header, 2x20P, female, 1.27mm pitched, double row, SMD - Link

• [8x] EDO RAM chip, 256K X 16 bit. Choices:

  • EliteMT M11B416256A-25J (also compatible with Voodoo 2)
  • Mosel Vitelic V53C16258HK30(or 45)
  • G-Link GLT44016-40J4-12 (or 15)
  • EtronTech Em614163A-50

• [4x] SMD Resistors, 47 Ohm, imperial 0805 size

• Very thin wire for extra signals. I used 30AWG enameled wire.