Language Server Protocol Support for Emacs

Table of Contents

• Language Server Protocol Support for Emacs
  • Why?
  • Overview
  • Installation
    • Install via melpa
  • Configuration
    • Install language server
    • Configure lsp-mode
      • Vanilla Emacs
      • Spacemacs
      • use-package
      • Docker
    • How does it work?
  • Supported languages
  • Commands
  • Settings
  • Screenshots
  • Extensions
    • TRAMP
      • How does it work?
      • Sample configuration
      • Dealing with stderr
  • Limitations
    • File watches
  • Contributions
    • Members
  • Troubleshooting
  • Adding support for languages
    • Registering server
    • Sections
  • FAQ
  • See also

Why?

• ❤️ Community Driven
• 💎 Fully featured - supports all features in Language Server Protocol v3.14.
• 🚀 Easy to configure - works out of the box and automatically upgrades if additional packages are present
• 🌟 Flexible - could be configured as full-blown IDE with flashy UI or minimal distraction free

Overview

Client for Language Server Protocol (v3.14). lsp-mode aims to provide IDE-like experience by providing optional integration with the most popular Emacs packages like company, flycheck and projectile.

• Non-blocking asynchronous calls
• Real-time Diagnostics/linting (via builtin flymake when Emacs > 26, requires flymake>=1.0.5 or flycheck/lsp-ui)
• Code completion - using company-lsp or builtin completion-at-point
• Hovers - using lsp-ui
• Code actions - using lsp-execute-code-action or lsp-ui
• Code outline - using builtin imenu or helm-imenu
• Code navigation - using builtin xref
• Code lens (references/implementations) - using builtin xref
• Highlights
• Formatting
• Debugger - dap-mode
• Helm integration - helm-lsp
• Ivy integration - lsp-ivy
• Treemacs integration - lsp-treemacs
• Semantic highlighting (as currently implemented by JDT LS and unreleased builds of clangd, cf. Semantic highlighting spec)

Installation

Install via melpa

The recommended way to install lsp-mode is via package.el - the built-in package manager in Emacs. lsp-mode is available on the two major package.el community maintained repos - MELPA Stable and MELPA.

M-x package-install [RET] lsp-mode [RET]

Configuration

Install language server

Check the table bellow with the list of supported servers and the corresponding instructions on how to install the server.

Configure lsp-mode

Vanilla Emacs

You could go minimal and use lsp-mode as it is without external packages with the built-in flymake and completion-at-point or you could install the following extensions for better experience:

• install lsp-ui for flycheck integration and higher level UI modules.
• install company-lsp if you want to use company-mode for completion.
• install lsp-treemacs for project wide error overview.
• install helm-lsp provides on type completion for xref-apropos.
• install dap-mode if your language is supported by the debugger.

(require 'lsp-mode)
(add-hook 'XXX-mode-hook #'lsp)

where XXX could be major mode like python, java, c++. Alternatively, if you want to minimize you configuration you may use prog-mode-hook. In case you do that, lsp will try to start for each programming mode and echo a message when there is no client registered for the current mode or if the corresponding server is not present. In addition, lsp-mode will automatically detect and configure lsp-ui and company-lsp. To turn off that behavior you could set lsp-auto-configure to nil.

To defer LSP server startup (and DidOpen notifications) until the buffer is visible you can use lsp-deferred instead of lsp:

(add-hook 'XXX-mode-hook #'lsp-deferred)

Spacemacs

lsp-mode is included in spacemacs develop branch. Add lsp to dotspacemacs-configuration-layers and configure the language that you want to use to be backed by lsp backend.

use-package

Replace (require 'lsp-mode) with the following if you use use-package.

(use-package lsp-mode
  :hook (XXX-mode . lsp)
  :commands lsp)

;; optionally
(use-package lsp-ui :commands lsp-ui-mode)
(use-package company-lsp :commands company-lsp)
(use-package helm-lsp :commands helm-lsp-workspace-symbol)
(use-package lsp-treemacs :commands lsp-treemacs-errors-list)
;; optionally if you want to use debugger
(use-package dap-mode)
;; (use-package dap-LANGUAGE) to load the dap adapter for your language

To defer LSP server startup (and DidOpen notifications) until the buffer is visible you can use lsp-deferred instead of lsp:

(use-package lsp-mode
  :hook (XXX-mode . lsp-deferred)
  :commands (lsp lsp-deferred))

Docker

Refer to lsp-docker README which provide a guide how you can run lsp-mode in docker container.

How does it work?

lsp-mode has predefined list of server configurations (loaded in lsp-clients.el) containing a mapping from major-mode to the server configuration or by using activation function. In addition to the default server configuration located in lsp-clients.el there are few languages servers which require separate package(check Supported languages). When you open a file from a particular project lsp-mode and call lsp command lsp-mode will look for server registrations able to handle current file. If there is such client lsp-mode will look for the project root. If you open a file from the project for the first time you will be prompted to define the current project root. Once the project root is selected it is saved in lsp-session file and it will be loaded the next time you start Emacs so you no longer will be asked for a project root when you open a file from that project. Later if you want to change the project root you may use lsp-workspace-folder-remove to remove the project and call lsp-workspace-folder-add to add the root. If you want to force starting a particular language server in a file you may use C-u M-x lsp which will prompt you to select language server to start.

Supported languages

Some of the servers are directly supported by lsp-mode by requiring lsp-clients.el while others require installing additional packages which provide server specific functionality.

Language	Language Server	Built-in	Installation command	Debugger
Ada	ada_language_server	Yes	Installation instructions	Yes (gdb)
Angular	vscode-ng-language-service	Yes	Installation instructions	Not relevant
Bash	bash-language-server	Yes	npm i -g bash-language-server
C++	ccls	emacs-ccls	ccls	Yes (gdb or lldb)
C++	clangd	Yes	clangd	Yes (gdb or lldb)
C++	cquery	emacs-cquery	cquery	Yes (gdb or lldb)
C#	OmniSharp-Roslyn	Yes	OmniSharp-Roslyn	No
Clojure	clojure-lsp	Yes	clojure-lsp
Crystal	scry	Yes	scry
CSS/LessCSS/SASS/SCSS	css	Yes	npm install -g vscode-css-languageserver-bin
Dart	dart_analysis_server	Yes	built into dart-sdk
Dockerfile	dockerfile-language-server-nodejs	Yes	npm install -g dockerfile-language-server-nodejs
Dart	dart_language_server	Yes	pub global activate dart_language_server
Elixir	elixir-ls	Yes	elixir-ls	Yes
Elm	elmLS	Yes	npm i -g @elm-tooling/elm-language-server, or clone the repository and follow installation instructions	No
Erlang	erlang_ls	Yes	erlang_ls
Eslint	eslint	Yes	LSP ESLint Guide	N/A
F#	fsautocomplete	Yes	Automatic by lsp-fsharp	No
Fortran	fortran-language-server	Yes	pip install fortran-language-server	Yes
Go	gopls	Yes	go get golang.org/x/tools/gopls@latest docs	Yes
Go	bingo	Yes	bingo	Yes
Groovy	groovy-language-server	Yes	groovy-language-server
Hack	hhvm	Yes	hhvm
HTML	html	Yes	npm install -g vscode-html-languageserver-bin
Haskell	IDE engine	lsp-haskell	IDE engine
Lua	EmmyLua	Yes	Installation
Java	Eclipse JDT LS	lsp-java	Automatic by lsp-java	Yes
JavaScript/TypeScript	typescript-language-server (recommended)	Yes	npm i -g typescript-language-server; npm i -g typescript	Yes (Firefox/Chrome)
JavaScript/TypeScript	javascript-typescript-stdio	Yes	npm i -g javascript-typescript-langserver	Yes (Firefox/Chrome)
JavaScript Flow	flow (add-on if working on a Flow file)	Yes	flow	Yes (Firefox/Chrome)
Json	vscode-json-languageserver	Yes	Automatic or manual by npm i -g vscode-json-languageserver
Julia	lsp-julia	lsp-julia	LanguageServer.jl
Kotlin	kotlin-language-server	Yes	kotlin-language-server
Nim	nimlsp	Yes	nimble install nimlsp	No
OCaml	ocaml-language-server	Yes	ocaml-language-server
OCaml	ocaml-lsp-server	Yes	ocaml-lsp-server
PHP(recommended)	intelephense	Yes	npm i intelephense -g	Yes
PHP	php-language-server	Yes	php-language-server	Yes
Powershell	PowerShellEditorServices	Yes	Automatic	Yes
Python	pyls	Yes	pip install ‘python-language-server[all]’	Yes
Python(Microsoft)	Microsoft Python Language Server	lsp-python-ms	lsp-python-ms	Yes
R	languageserver	Yes	install.packages(“languageserver”)	No
Ruby	solargraph	Yes	gem install solargraph	Yes
Rust	rls	Yes	rls	Yes
Rust	rust-analyzer	Yes	rust-analyzer
Scala	Metals	Yes	Metals
Swift	sourcekit-LSP	lsp-sourcekit	sourcekit-LSP	Yes (via llvm debug adapter)
Terraform	terraform-lsp	No	Git clone outside of $GOPATH; go install. (Requires go > 1.11)	No
TeX, LaTeX, etc.	Digestif	Yes	luarocks --server http://luarocks.org/dev install digestif
Verilog/SystemVerilog	hdl_checker	Yes	pip install hdl-checker –upgrade	No
VHDL	VHDL Tool	Yes	Download from http://www.vhdltool.com/download	No
Vimscript	vim-language-server	Yes	npm install -g vim-language-server	n/a
Vue	vue-language-server	Yes	npm install -g vue-language-server	Yes (Firefox/Chrome)
XML	lsp4xml	Yes	Download from lsp4xml releases
YAML	yaml	Yes	npm install -g yaml-language-server

Commands

• lsp-describe-session - Display session folders and running servers.
• lsp-describe-thing-at-point - Display help for the thing at point.
• lsp-execute-code-action - Execute code action
• lsp-format-buffer - Format current buffer
• lsp-organize-imports - Organize library imports
• lsp-goto-implementation - Go to implementation
• lsp-goto-type-definition - Go to type definition
• lsp-rename - Rename symbol at point
• lsp-restart-workspace - Restart project
• lsp-symbol-highlight - Highlight all relevant references to the symbol under point.
• lsp-workspace-folders-add - Add workspace folder
• lsp-workspace-folders-remove - Remove workspace folder
• lsp-workspace-folders-open - Open a project directory in dired
• imenu or helm-imenu - display document structure.
• completion-at-point - display completion using built-in emacs completion-at-point framework.
• lsp-find-definition - to find the definition for the symbol under point.
• lsp-find-references - Find references for the symbol under point.
• lsp-disconnect - Disconnect the buffer from the language server.
• lsp-lens-show - Show lenses in the current file
• lsp-lens-hide - Hide lenses in the current file
• lsp-lens-mode - Turn on/off lenses in the current file.
• lsp-avy-lens - Click lens using avy
• lsp-signature-activate - activate signature help. Bound to C-S-SPC by default.
• lsp-signature-next - show next signature. Bound to M-n when signature help is activated.
• lsp-signature-previous - show previous signature. Bound to M-p when signature help is activated.
• lsp-signature-stop - cancel signature help. Bound to C-c C-k when signature help is activated.

Settings

• lsp-log-io - If non-nil, print all messages to and from the language server to *lsp-log*.
• lsp-print-performance - If non-nil, print performance info. to *lsp-log*.
• lsp-inhibit-message - If non-nil, inhibit the message echo via inhibit-message.
• lsp-report-if-no-buffer - If non nil the errors will be reported even when the file is not open.
• lsp-keep-workspace-alive - If non nil keep workspace alive when the last workspace buffer is closed.
• lsp-enable-snippet - Enable/disable snippet completion support.
• lsp-auto-guess-root - Automatically guess the project root using projectile/project. Do not use this setting unless you are familiar with lsp-mode internals and you are sure that all of your projects are following projectile=/=project.el conventions.
• lsp-restart - Defines how server exited event must be handled.
• lsp-session-file - File where session information is stored.
• lsp-auto-configure - Auto configure lsp-mode. When set to t lsp-mode will auto-configure lsp-ui and company-lsp.
• lsp-document-sync-method - How to sync the document with the language server.
• lsp-auto-execute-action - Auto-execute single action.
• lsp-eldoc-render-all - Display all of the info returned by document/onHover. If this is nil, eldoc will show only the symbol information.
• lsp-enable-completion-at-point - Enable completion-at-point integration.
• lsp-enable-xref - Enable xref integration.
• lsp-prefer-flymake - If you prefer flycheck and lsp-ui-flycheck is available, (setq lsp-prefer-flymake nil). If set to :none neither of two will be enabled.
• lsp-enable-indentation - Indent regions using the file formatting functionality provided by the language server.
• lsp-enable-on-type-formatting - Enable textDocument/onTypeFormatting integration.
• lsp-before-save-edits - If non-nil, lsp-mode will apply edits suggested by the language server before saving a document.
• lsp-imenu-show-container-name - Display the symbol’s container name in an imenu entry.
• lsp-imenu-container-name-separator - Separator string to use to separate the container name from the symbol while displaying imenu entries.
• lsp-imenu-sort-methods - How to sort the imenu items. The value is a list of kind, name or position. Priorities are determined by the index of the element.
• lsp-response-timeout - Number of seconds to wait for a response from the language server before timing out.
• lsp-enable-file-watchers - If non-nil lsp-mode will watch the files in the workspace if the server has requested that.
• lsp-server-trace - Request trace mode on the language server.
• lsp-enable-semantic-highlighting - Enable experimental semantic highlighting support
• lsp-enable-imenu - If non-nil, automatically enable imenu integration when server provides textDocument/documentSymbol.
• lsp-signature-auto-activate - Auto activate signature when trigger char is pressed.
• lsp-signature-render-documentation - Include signature documentation in signature help.
• lsp-enable-text-document-color - Enable textDocument/documentColor when server supports it.

Screenshots

• RUST Completion with company-lsp
• Typescript references using lsp-ui
• Debugging Python using dap-mode
• Call hierarchy via ccls
• Metals Doctor
• Semantic highlighting as provided by clangd (built from unreleased 10.0 branch). In this screenshot, all other font-locking has been disabled (hence no syntax highlighting of comments or basic keywords such as auto)

Extensions

TRAMP

LSP mode has support for tramp buffers with the following requirements:

• The language server has to be present on the remote server.
• Having multi folder language server (like Eclipse JDT LS) cannot have local and remote workspace folders.

How does it work?

lsp-mode detects whether a particular file is located on remote machine and looks for a client which matches current file and it is marked as :remote? t. Then lsp-mode starts the client through tramp.

Sample configuration

Here it is example how you can configure python language server to work when using TRAMP. Note that if you are trying to convert existing language server configuration you should copy all of it’s properties(e. g. :request-handlers, activation-fn, etc).

(lsp-register-client
 (make-lsp-client :new-connection (lsp-tramp-connection "binary-or-full-path")
                  :major-modes '(python-mode)
                  :remote? t
                  :server-id 'pyls-remote))

Dealing with stderr

With TRAMP, Emacs does not have an easy way to distinguish stdout and stderr, so when the underlying LSP process writes to stderr, it breaks the lsp-mode parser. As a workaround, lsp-mode is redirecting stderr to /tmp/<process-name>-<id>~stderr.

Limitations

File watches

When some of the workspaces that are active in the current project requests file notifications via workspace/didChangeWatchedFiles lsp-mode will start monitoring each of the folders in the workspace for changes. In case your project contains a lot of files you might want to disable file monitoring via lsp-enable-file-watchers (you may use dir-locals).

Contributions

Contributions are very much welcome.

Members

Here it is a list of the current lsp-mode members and what they are primary working on/responsible for.

Member	Responsible for:
TOTBWF	F#
brotzeit	Rust
dsyzling	Scala
kurnevsky	Scala & Rust
seagle0128	Go & MS Python Language Server
sebastiansturm	lsp-mode core & C++
vibhavp	lsp-mode core
yyoncho	lsp-mode core and Java

Troubleshooting

• set lsp-log-io to t to inspect communication between client and the server. Use lsp-workspace-show-log to switch to the corresponding log buffer.
• lsp-describe-session will show the current projects roots + the started severs and allows inspecting the server capabilities.

Adding support for languages

Registering server

Here it is the minimal configuration that is needed for new language server registration. Refer to the documentation of lsp-client.el for the additional settings supported on registration time. lsp-language-id-configuration must be updated to contain the corresponding mode -> language id - in this case (python-mode . "python")

(defvar lsp-language-id-configuration
  '(...
   (python-mode . "python")
   ...))
;; if you are adding the support for your language server in separate repo use
;; (add-to-list 'lsp-language-id-configuration '(python-mode . "python"))

(lsp-register-client
 (make-lsp-client :new-connection (lsp-stdio-connection "pyls")
                  :major-modes '(python-mode)
                  :server-id 'pyls))

If the language server supports environment variables to control additional behavior, you can register that by using the :environment-fn function, like the Bash language client does:

(lsp-register-client
 (make-lsp-client :new-connection (lsp-stdio-connection '("bash-language-server" "start"))
                  :major-modes '(sh-mode)
                  :priority -1
                  :environment-fn (lambda ()
                                    (("EXPLAINSHELL_ENDPOINT" . lsp-bash-explainshell-endpoint)
                                     ("HIGHLIGHT_PARSING_ERRORS" . lsp-bash-highlight-parsing-errors)))
                  :server-id 'bash-ls))

lsp-bash-explainshell-endpoint and lsp-bash-highlight-parsing-errors are language client defcustom that expose supported server environment settings in a type-safe way. If you change any of those variables, restart the language server with lsp-restart-workspace for the changes to be applied.

Sections

lsp-mode provides tools to bridge emacs defcustom as a language configuration sections properties(see specification workspace/configuration). In addition you may use lsp-generate-settings from Generate Settings script to generate defcustom from package.json VScode plugin manifest. Example:

(defcustom lsp-foo-language-server-property "bar"
  "Demo property."
  :group 'foo-ls
  :risky t)

(lsp-register-custom-settings '(("foo.section.property" lsp-foo-language-server-property)))

(lsp-configuration-section  "foo")
;; =>  (("foo" ("settings" ("property" . "bar"))))

FAQ

• How do I troubleshoot “Server FOO-LS:pid exited with status signal. Do you want to restart it? (y or n)”?
  • This message indicates that the language server has crashed for some reason. You may check the server stderr which is *FOO-LS::stderr*. If you get this message on startup you may try to run the exact command that lsp-mode is running in the terminal. You may find it in *lsp-log* buffer.
• How to configure a server with local variables?
  • Add lsp server call to hack-local-variables-hook which runs right after the local variables are loaded.

    (add-hook 'hack-local-variables-hook
              (lambda () (when (derived-mode-p 'XXX-mode) (lsp))))
            

• I have multiple language servers registered for language FOO. Which one will be used when opening a project?
  • The one with highest priority wins. lsp-clients.el predefined servers have priority -1, lower than external packages (priority 0 if unspecified). If a server is registered with :add-on? flag set to t it will be started in parallel to the other servers that are registered for the current mode.
• I have multiple language servers for language FOO and I want to select the server per project, what can I do?
  • You may create dir-local for each of the projects and specify list of lsp-enabled-clients. This will narrow the list of the clients that are going to be tested for the project.
• The completion does not work fine and inserts arguments and placeholders, what I am doing wrong?
  • Snippet support works only with company-lsp so if you are using completion-at-point the snippets won’t be expanded and you should either disable them by setting lsp-enable-snippet to nil or you should switch to company-lsp. Note also that company-tng frontend does not support snippet expansion(see company-mode#891)
• How to automatically follow lsp-ui-log?
  • Go into the log buffer and execute the following snippet(source: Emacs auto scrolling log buffer)

  (set (make-local-variable 'window-point-insertion-type) t)
      

• I am getting “Package ‘spinner-1.7.3’ is unavailable” when trying to install lsp-mode.
  • This is caused by GPG keys used by the ELPA package manager not being up to date. You may fix by installing: gnu-elpa-keyring-update
• Json completion doesn’t seem working?
  • The latest vscode-json-languageserver is broken. You will need to install the earlier version of it npm i [email protected]
• The flycheck does not work in typescript, html and javascript blocks in vue-mode. How to fix that?
  • This is caused by the fact that vue-mode uses multiple major modes in single file and the lsp-ui checker may not associated with the major mode at point. You could fix that by adding the following lines to your config.

    (with-eval-after-load 'lsp-ui-flycheck
      (mapc 'lsp-ui-flycheck-add-mode '(typescript-mode js-mode css-mode vue-html-mode)))
            

See also

• lsp-docker - provide docker image with preconfigured language servers with corresponding emacs configuration.
• company-box - company frontend with icons.
• dap-mode - Debugger integration for lsp-mode.
• eglot - An alternative minimal LSP implementation.