Create art_pi.conf #136
Open
Create art_pi.conf #136
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
support art_pi
building cmd
```
west build -p always -b art_pi samples/sysbuild/with_mcuboot \
--sysbuild -- \
-DSB_CONFIG_BOOTLOADER_MCUBOOT=y
```
building
```
-- Zephyr version: 4.2.99 (/home/hdj/zephyrproject/zephyr), build: v4.2.0-3810-g9fe29f98ae2d
[286/286] Linking C executable zephyr/zephyr.elf
Memory region Used Size Region Size %age Used
FLASH: 43024 B 128 KB 32.82%
RAM: 87296 B 512 KB 16.65%
EXTMEM: 0 GB 64 MB 0.00%
SRAM1: 0 GB 128 KB 0.00%
SRAM2: 0 GB 128 KB 0.00%
SRAM4: 0 GB 64 KB 0.00%
DTCM: 0 GB 128 KB 0.00%
ITCM: 0 GB 64 KB 0.00%
SRAM3: 0 GB 32 KB 0.00%
SDRAM1: 0 GB 6 MB 0.00%
IDT_LIST: 0 GB 32 KB 0.00%
Generating files from /home/hdj/zephyrproject/zephyr/build/mcuboot/zephyr/zephyr.elf for board: art_pi
[11/16] Performing build step for 'with_mcuboot'
[1/148] Preparing syscall dependency handling
[2/148] Generating include/generated/zephyr/version.h
-- Zephyr version: 4.2.99 (/home/hdj/zephyrproject/zephyr), build: v4.2.0-3810-g9fe29f98ae2d
[148/148] Linking C executable zephyr/zephyr.elf
Memory region Used Size Region Size %age Used
FLASH: 20048 B 2096768 B 0.96%
RAM: 4608 B 512 KB 0.88%
EXTMEM: 0 GB 64 MB 0.00%
SRAM1: 0 GB 128 KB 0.00%
SRAM2: 0 GB 128 KB 0.00%
SRAM4: 0 GB 64 KB 0.00%
DTCM: 0 GB 128 KB 0.00%
ITCM: 0 GB 64 KB 0.00%
SRAM3: 0 GB 32 KB 0.00%
SDRAM1: 0 GB 6 MB 0.00%
IDT_LIST: 0 GB 32 KB 0.00%
Generating files from /home/hdj/zephyrproject/zephyr/build/with_mcuboot/zephyr/zephyr.elf for board: art_pi
image.py: sign the payload
image.py: sign the payload
[16/16] Completed 'with_mcuboot'
```
download
```
hdj@hdj-virtual-machine:~/zephyrproject/zephyr$ west flash
-- west flash: rebuilding
[0/6] Performing build step for 'with_mcuboot'
ninja: no work to do.
[1/6] Performing build step for 'mcuboot'
ninja: no work to do.
[6/6] Completed 'mcuboot'
-- west flash: using runner stm32cubeprogrammer
-------------------------------------------------------------------
STM32CubeProgrammer v2.20.0
-------------------------------------------------------------------
ST-LINK SN : 0669FF505750888667051238
ST-LINK FW : V2J43M28
Board : --
Voltage : 3.25V
SWD freq : 4000 KHz
Connect mode: Under Reset
Reset mode : Hardware reset
Device ID : 0x450
Revision ID : Rev V
Device name : STM32H7xx
Flash size : 128 KBytes
Device type : MCU
Device CPU : Cortex-M7
BL Version : 0x90
Opening and parsing file: zephyr.hex
Memory Programming ...
File : zephyr.hex
Size : 42.02 KB
Address : 0x08000000
Erasing memory corresponding to segment 0:
Download in Progress:
[==================================================] 100%
File download complete
Time elapsed during download operation: 00:00:09.268
RUNNING Program ...
Address: : 0x8000000
Application is running, Please Hold on...
Start operation achieved successfully
-- west flash: using runner stm32cubeprogrammer
-------------------------------------------------------------------
STM32CubeProgrammer v2.20.0
-------------------------------------------------------------------
ST-LINK SN : 0669FF505750888667051238
ST-LINK FW : V2J43M28
Board : --
Voltage : 3.25V
SWD freq : 4000 KHz
Connect mode: Under Reset
Reset mode : Hardware reset
Device ID : 0x450
Revision ID : Rev V
Device name : STM32H7xx
Flash size : 128 KBytes
Device type : MCU
Device CPU : Cortex-M7
BL Version : 0x90
Opening and parsing file: zephyr.signed.hex
Memory Programming ...
File : zephyr.signed.hex
Size : 19.91 KB
Address : 0x90000000
Erasing memory corresponding to segment 0:
Erasing external memory sectors [0 4]
Download in Progress:
[==================================================] 100%
File download complete
Time elapsed during download operation: 00:00:01.051
RUNNING Program ...
Address: : 0x8000000
Application is running, Please Hold on...
Start operation achieved successfully
```
log
```
*** Booting MCUboot v2.2.0-118-gaa4fa2b6e173 ***
*** Using Zephyr OS build v4.2.0-3810-g9fe29f98ae2d ***
*** Booting Zephyr OS build v4.2.0-3810-g9fe29f98ae2d ***
Address of sample 0x90000000
Hello sysbuild with mcuboot! art_pi
```
|
art_pi pr |
newbie-jiang
added a commit
to newbie-jiang/zephyr
that referenced
this pull request
Sep 17, 2025
support art_pi mcuboot pr : zephyrproject-rtos/mcuboot#136 art_pi pr : zephyrproject-rtos#96139 building cmd ``` west build -p always -b art_pi samples/sysbuild/with_mcuboot \ --sysbuild -- \ -DSB_CONFIG_BOOTLOADER_MCUBOOT=y ``` building ``` -- Zephyr version: 4.2.99 (/home/hdj/zephyrproject/zephyr), build: v4.2.0-3810-g9fe29f98ae2d [286/286] Linking C executable zephyr/zephyr.elf Memory region Used Size Region Size %age Used FLASH: 43024 B 128 KB 32.82% RAM: 87296 B 512 KB 16.65% EXTMEM: 0 GB 64 MB 0.00% SRAM1: 0 GB 128 KB 0.00% SRAM2: 0 GB 128 KB 0.00% SRAM4: 0 GB 64 KB 0.00% DTCM: 0 GB 128 KB 0.00% ITCM: 0 GB 64 KB 0.00% SRAM3: 0 GB 32 KB 0.00% SDRAM1: 0 GB 6 MB 0.00% IDT_LIST: 0 GB 32 KB 0.00% Generating files from /home/hdj/zephyrproject/zephyr/build/mcuboot/zephyr/zephyr.elf for board: art_pi [11/16] Performing build step for 'with_mcuboot' [1/148] Preparing syscall dependency handling [2/148] Generating include/generated/zephyr/version.h -- Zephyr version: 4.2.99 (/home/hdj/zephyrproject/zephyr), build: v4.2.0-3810-g9fe29f98ae2d [148/148] Linking C executable zephyr/zephyr.elf Memory region Used Size Region Size %age Used FLASH: 20048 B 2096768 B 0.96% RAM: 4608 B 512 KB 0.88% EXTMEM: 0 GB 64 MB 0.00% SRAM1: 0 GB 128 KB 0.00% SRAM2: 0 GB 128 KB 0.00% SRAM4: 0 GB 64 KB 0.00% DTCM: 0 GB 128 KB 0.00% ITCM: 0 GB 64 KB 0.00% SRAM3: 0 GB 32 KB 0.00% SDRAM1: 0 GB 6 MB 0.00% IDT_LIST: 0 GB 32 KB 0.00% Generating files from /home/hdj/zephyrproject/zephyr/build/with_mcuboot/zephyr/zephyr.elf for board: art_pi image.py: sign the payload image.py: sign the payload [16/16] Completed 'with_mcuboot' ``` download ``` hdj@hdj-virtual-machine:~/zephyrproject/zephyr$ west flash -- west flash: rebuilding [0/6] Performing build step for 'with_mcuboot' ninja: no work to do. [1/6] Performing build step for 'mcuboot' ninja: no work to do. [6/6] Completed 'mcuboot' -- west flash: using runner stm32cubeprogrammer ------------------------------------------------------------------- STM32CubeProgrammer v2.20.0 ------------------------------------------------------------------- ST-LINK SN : 0669FF505750888667051238 ST-LINK FW : V2J43M28 Board : -- Voltage : 3.25V SWD freq : 4000 KHz Connect mode: Under Reset Reset mode : Hardware reset Device ID : 0x450 Revision ID : Rev V Device name : STM32H7xx Flash size : 128 KBytes Device type : MCU Device CPU : Cortex-M7 BL Version : 0x90 Opening and parsing file: zephyr.hex Memory Programming ... File : zephyr.hex Size : 42.02 KB Address : 0x08000000 Erasing memory corresponding to segment 0: Download in Progress: [==================================================] 100% File download complete Time elapsed during download operation: 00:00:09.268 RUNNING Program ... Address: : 0x8000000 Application is running, Please Hold on... Start operation achieved successfully -- west flash: using runner stm32cubeprogrammer ------------------------------------------------------------------- STM32CubeProgrammer v2.20.0 ------------------------------------------------------------------- ST-LINK SN : 0669FF505750888667051238 ST-LINK FW : V2J43M28 Board : -- Voltage : 3.25V SWD freq : 4000 KHz Connect mode: Under Reset Reset mode : Hardware reset Device ID : 0x450 Revision ID : Rev V Device name : STM32H7xx Flash size : 128 KBytes Device type : MCU Device CPU : Cortex-M7 BL Version : 0x90 Opening and parsing file: zephyr.signed.hex Memory Programming ... File : zephyr.signed.hex Size : 19.91 KB Address : 0x90000000 Erasing memory corresponding to segment 0: Erasing external memory sectors [0 4] Download in Progress: [==================================================] 100% File download complete Time elapsed during download operation: 00:00:01.051 RUNNING Program ... Address: : 0x8000000 Application is running, Please Hold on... Start operation achieved successfully ``` log ``` *** Booting MCUboot v2.2.0-118-gaa4fa2b6e173 *** *** Using Zephyr OS build v4.2.0-3810-g9fe29f98ae2d *** *** Booting Zephyr OS build v4.2.0-3810-g9fe29f98ae2d *** Address of sample 0x90000000 Hello sysbuild with mcuboot! art_pi ```
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
support art_pi
building cmd
building
download
log