Update module go.opentelemetry.io/collector/extension to v0.120.0

[renovate]

Note: This PR body was truncated due to platform limits.

This PR contains the following updates:

Package	Change	Age	Confidence
go.opentelemetry.io/collector/extension	v0.93.0 -> v0.120.0

---

Release Notes

open-telemetry/opentelemetry-collector (go.opentelemetry.io/collector/extension)

v0.120.0

Compare Source

🛑 Breaking changes 🛑

• all: Added support for go1.24, bumped minimum version to 1.23 (#​12370)
• mdatagen: Removing deprecated generated funcs and a few test funcs as well. (#​12304)
• service: Align component logger attributes with those defined in RFC (#​12217)
  See Pipeline Component Telemetry RFC

💡 Enhancements 💡

• otlpreceiver: Update stability for logs (#​12335)
• exporterhelper: Implement sync disabled queue used when batching is enabled. (#​12245)
• exporterhelper: Enable the new pull-based batcher in exporterhelper (#​12291)
• exporterhelper: Update queue size after the element is done exported (#​12399)
  After this change the active queue size will include elements in the process of being exported.
• otelcol: Add featuregate command to display information about available features (#​11998)
  The featuregate command allows users to view detailed information about feature gates
  including their status, stage, and description.

🧰 Bug fixes 🧰

• memorylimiter: Logger no longer attributes to single signal, pipeline, or component. (#​12217)
• otlpreceiver: Logger no longer attributes to random signal when receiving multiple signals. (#​12217)
• exporterhelper: Fix undefined behavior access to request after send to next component. This causes random memory access. (#​12281)
• exporterhelper: Fix default batcher to correctly call all done callbacks exactly once (#​12247)
• otlpreceiver: Fix OTLP http receiver to correctly set Retry-After (#​12367)
• otlphttpexporter: Fix parsing logic for Retry-After in OTLP http protocol. (#​12366)
  The value of Retry-After field can be either an HTTP-date or delay-seconds and the current logic only parsed delay-seconds.
• cmd/builder: Ensure unique aliases for modules with same suffix (#​12201)

v0.119.0

Compare Source

🛑 Breaking changes 🛑

• exporterhelper: Rename exporter span signal specific attributes (e.g. "sent_spans" / "send_failed_span") to "items.sent" / "items.failed". (#​12165)

• cmd/mdatagen: Remove dead field telemetry::level (#​12144)

• exporterhelper: Change exporter ID to be a Span level attribute instead on each event. (#​12164)
  This does not have an impact on the level of information emitted, but on the structure of the Span.

• cmd/mdatagen: Remove level field from metrics definition (#​12145)
  This mechanism will be added back once a new views mechanism is implemented.

• service: Value for telemetry exporter otlp.protocol updated from grpc/protobuf to grpc. (#​12337)

• service: internal metrics exported over Prometheus may differ from previous versions. (#​11611)

  Users who do not customize the Prometheus reader should not be impacted. The change to update the internal telemetry to use otel-go config can cause unexpected behaviour
  for end users. This change is caused by the default values in config being different from what the Collector has used in previous versions. The
  following changes can occur when users configure their service::telemetry::metrics::readers:

  • the metric name will append a _total suffix if without_type_suffix is not configured. Set without_type_suffix to true to disable this.
  • units will be appended to metric name if without_units is not configured. Set without_units to true to disable this.
  • a target_info metric will be emitted if without_scope_info is not configured. Set without_scope_info to true to disable this.

💡 Enhancements 💡

• configtls: Allow users to mention their preferred curve types for ECDHE handshake (#​12174)
• service: remove custom code and instead use config package to instantiate meter provider. (#​11611)
• otelcol: Adds support for listing config providers in components command's output (#​11570)
• general: Reduce memory allocations when loading configuration and parsing component names (#​11964)

🧰 Bug fixes 🧰

• exporterhelper: Fix bug that the exporter with new batcher may have been marked as non mutation. (#​12239)
  Only affects users that manually turned on exporter.UsePullingBasedExporterQueueBatcher featuregate.

• service: Preserve URL normalization logic that was present before. (#​12254)

• confighttp: confighttp.ToServer now sets ErrorLog with a default logger backed by Zap (#​11820)

  This change ensures that the http.Server's ErrorLog is correctly set using Zap's logger at the error level, addressing the issue of error logs being printed using a different logger.

• exporterhelper: Fix context propagation for DisabledBatcher (#​12231)

• mdatagen: apply fieldalignment to generated code (#​12125)

• mdatagen: Fix bug where Histograms were marked as not supporting temporal aggregation (#​12168)

• exporterhelper: Fix MergeSplit issue that ignores the initial message size. (#​12257)

• service: Include validation errors from telemetry.Config when validating the service config (#​12100)
  Previously validation errors were only printed to the console

• service-telemetry: pass the missing async error channel into service telemetry settings (#​11417)

v0.118.0

Compare Source

💡 Enhancements 💡

• exporterhelper: Add blocking option to control queue behavior when full (#​12090)
• debugexporter: Add EventName to debug exporter for Logs. EventName was added as top-level field in the LogRecord from 1.5.0 of proto definition. (#​11966)
• confighttp: Added support for configuring compression levels. (#​10467)
  A new configuration option called CompressionParams has been added to confighttp. | This allows users to configure the compression levels for the confighttp client.
• exporterhelper: Change the memory queue implementation to not pre-allocate capacity objects. (#​12070)
  This change improves memory usage of the collector under low utilization and is a prerequisite for supporting different other size limitations (number of items, bytes).

🧰 Bug fixes 🧰

• mdatagen: apply fieldalignment to generated code (#​12121)
• otelcoltest: Set DefaultScheme to env in the test ConfigProvider to replicate the default provider used by the Collector. (#​12066)

v0.117.0

Compare Source

🛑 Breaking changes 🛑

• otelcol: Remove warnings when 0.0.0.0 is used (#​11713, #​8510)

🧰 Bug fixes 🧰

• internal/sharedcomponent: Fixed bug where sharedcomponent would use too much memory remembering all the previously reported statuses (#​11826)

v0.116.0

Compare Source

🛑 Breaking changes 🛑

• pdata/pprofile: Remove deprecated Profile.EndTime and Profile.SetEndTime methods. (#​11796)

💡 Enhancements 💡

• xconfighttp: Add WithOtelHTTPOptions to experimental module xconfighttp (#​11770)

🧰 Bug fixes 🧰

• exporterhelper: Fix memory leak at exporter shutdown (#​11401)
• sharedcomponent: Remove race-condition and cleanup locking (#​11819)

v0.115.0

Compare Source

🛑 Breaking changes 🛑

• otelcol: Change all logged timestamps to ISO8601. (#​10543)
  This makes log timestamps human-readable (as opposed to epoch seconds in
  scientific notation), but may break users trying to parse logged lines in the
  old format.
• pdata/pprofile: Upgrade pdata to opentelemetry-proto v1.4.0 (#​11722)

🚩 Deprecations 🚩

• scraperhelper: Deprecate all Scraper helpers in scraperhelper (#​11732)
  Deprecate ScrapeFunc, ScraperOption, WithStart, WithShutdown in favor of equivalent funcs in scraper package.

💡 Enhancements 💡

• exporterqueue: Introduce a feature gate exporter.UsePullingBasedExporterQueueBatcher to use the new pulling model in exporter queue batching. (#​8122, #​10368)
  If both queuing and batching is enabled for exporter, we now use a pulling model instead of a
  pushing model. num_consumer in queue configuration is now used to specify the maximum number of
  concurrent workers that are sending out the request.

• service: label metrics as alpha to communicate their stability (#​11729)

• consumer: Mark consumer as stable. (#​9046)

• service: Add support for ca certificates in telemetry metrics otlp grpc exporter (#​11633)
  Before this change the Certificate value in config was silently ignored.

🧰 Bug fixes 🧰

• service: ensure OTLP emitted logs respect severity (#​11718)
• featuregate: Fix an unfriendly display message runtime error when featuregate is used to display command line usage. (#​11651)
• profiles: Fix iteration over scope profiles while counting the samples. (#​11688)

v0.114.0

Compare Source

💡 Enhancements 💡

• cmd/builder: Allow for replacing of local Providers and Converters when building custom collector with ocb. (#​11649)
  Use the property path under gomod to replace an go module with a local folder in
  builder-config.yaml. Ex:

  providers:
    - gomod: module.url/my/custom/provider v1.2.3
      path: /path/to/local/provider
  

• cmd/builder: Allow configuring confmap.Converter components in ocb. (#​11582)
  If no converters are specified, there will be no converters added.
  Currently, the only published converter is expandconverter which is
  deprecated as of v0.107.0, but can still be added for testing purposes.

  To configure a custom converter, make sure your converter implements the converter
  interface and is published as a go module (or replaced locally if not published).
  You may then use the converters key in your OCB build manifest with a list of
  Go modules (and replaces as necessary) to include your converter.

  Please note that converters are order-dependent. The confmap will apply converters
  in order of which they are listed in your manifest if there is more than one.

• all: shorten time period before removing an unmaintained component from 6 months to 3 months (#​11664)

🧰 Bug fixes 🧰

• all: Updates dialer timeout section documentation in confignet README (#​11685)
• scraperhelper: If the scraper shuts down, do not scrape first. (#​11632)
  When the scraper is shutting down, it currently will scrape at least once.
  With this change, upon receiving a shutdown order, the receiver's scraperhelper will exit immediately.

v0.113.0

Compare Source

🛑 Breaking changes 🛑

• internal/fanoutconsumer: Extract internal/fanoutconsumer as a separate go module (#​11441)
• builder: Remove builder support to build old version, and the otelcol_version config (#​11405)
  User should remove this property from their config, to build older versions use older builders.
• receiver: Make receivertest into its own module (#​11462)
• builder: Remove deprecated flags from Builder (#​11576)
  Here is the list of flags | --name, --description, --version, --otelcol-version, --go, --module
• internal/sharedcomponent: Extract internal/sharedcomponent as a separate go module (#​11442)

💡 Enhancements 💡

• mdatagen: Add otlp as supported distribution (#​11527)
• batchprocessor: Move single shard batcher creation to the constructor (#​11594)
• service: add support for using the otelzap bridge and emit logs using the OTel Go SDK (#​10544)

🧰 Bug fixes 🧰

• service: ensure traces and logs emitted by the otel go SDK use the same resource information (#​11578)
• config/configgrpc: Patch for bug in the grpc-go NewClient that makes the way the hostname is resolved incompatible with the way proxy setting are applied. (#​11537)
• builder: Update builder default providers to latest stable releases (#​11566)

v0.112.0

Compare Source

🛑 Breaking changes 🛑

• consumer/consumererror: Extract consumer/consumererror as a separate go module (#​11440)
• exporter/exportertest: Put exportertest into its own module (#​11461)
• service: Remove stable gate component.UseLocalHostAsDefaultHost (#​11412)

🚩 Deprecations 🚩

• processortest: Deprecated 'NewUnhealthyProcessorCreateSettings'. Use NewNopSettings instead. (#​11307)

💡 Enhancements 💡

• mdatagen: Added generated_package_name config field to support custom generated package name. (#​11231)
• mdatagen: Generate documentation for components with resource attributes only (#​10705)
• confighttp: Adding support for lz4 compression into the project (#​9128)
• service: Hide profiles support behind a feature gate while it remains alpha. (#​11477)
• exporterhelper: Retry sender will fail fast when the context timeout is shorter than the next retry interval. (#​11183)

🧰 Bug fixes 🧰

• cmd/builder: Fix default configuration for builder for httpprovider, httpsprovider, and yamlprovider. (#​11357)
• processorhelper: Fix issue where in/out parameters were not recorded when error was returned from consumer. (#​11351)

v0.111.0

Compare Source

🛑 Breaking changes 🛑

• service/telemetry: Change default metrics address to "localhost:8888" instead of ":8888" (#​11251)
  This behavior can be disabled by disabling the feature gate 'telemetry.UseLocalHostAsDefaultMetricsAddress'.
• loggingexporter: Removed the deprecated logging exporter. Use the debug exporter instead. (#​11037)

🚩 Deprecations 🚩

• service/telemetry: Deprecate service::telemetry::metrics::address in favor of service::telemetry::metrics::readers. (#​11205)
• processorhelper: Deprecate BuildProcessorMetricName as it's no longer needed since introduction of mdatagen (#​11302)

💡 Enhancements 💡

• ocb: create docker images for OCB, per open-telemetry/opentelemetry-collector-releases#671 (#​5712)
  Adds standard Docker images for OCB to Dockerhub and GitHub, see hub.docker.com/r/otel/opentelemetry-collector-builder
• confighttp: Snappy compression to lazy read for memory efficiency (#​11177)
• httpsprovider: Mark the httpsprovider as stable. (#​11191)
• httpprovider: Mark the httpprovider as stable. (#​11191)
• yamlprovider: Mark the yamlprovider as stable. (#​11192)
• confmap: Allow using any YAML structure as a string when loading configuration including time.Time formats (#​10659)
  Previously, fields with time.Time formats could not be used as strings in configurations

🧰 Bug fixes 🧰

• processorhelper: Fix data race condition, concurrent writes to the err variable, causes UB (Undefined Behavior) (#​11350)
• cmd/builder: re-adds function to properly set and view version number of OpenTelemetry Collector Builder (ocb) binaries (#​11208)
• pdata: Unmarshal Span and SpanLink flags from JSON (#​11267)

v0.110.0

Compare Source

🛑 Breaking changes 🛑

• processorhelper: Update incoming/outgoing metrics to a single metric with a otel.signal attributes. (#​11144)
  The following metrics were added in the previous version

  • otelcol_processor_incoming_spans
  • otelcol_processor_outgoing_spans
  • otelcol_processor_incoming_metric_points
  • otelcol_processor_outgoing_metric_points
  • otelcol_processor_incoming_log_records
  • otelcol_processor_outgoing_log_records

  They are being replaced with the following to more closely align with OTEP 259:

  • otelcol_processor_incoming_items
  • otelcol_processor_outgoing_items

• processorhelper: Remove deprecated [Traces|Metrics|Logs]Inserted funcs (#​11151)

• config: Mark UseLocalHostAsDefaultHostfeatureGate as stable (#​11235)

🚩 Deprecations 🚩

• processorhelper: deprecate accepted/refused/dropped metrics (#​11201)
  The following metrics are being deprecated as they were only used in a single
  processor:
  • otelcol_processor_accepted_log_records
  • otelcol_processor_accepted_metric_points
  • otelcol_processor_accepted_spans
  • otelcol_processor_dropped_log_records
  • otelcol_processor_dropped_metric_points
  • otelcol_processor_dropped_spans
  • otelcol_processor_refused_log_records
  • otelcol_processor_refused_metric_points
  • otelcol_processor_refused_spans

💡 Enhancements 💡

• pdata: Add support to MoveTo for Map, allow avoiding copies (#​11175)
• mdatagen: Add stability field to telemetry metrics, allowing the generated description to include a stability string. (#​11160)
• confignet: Mark module as Stable. (#​9801)
• confmap/provider/envprovider: Support default values when env var is empty (#​5228)
• mdatagen: mdatagen validateMetrics() support validate metrics in telemetry.metric (#​10925)
• service/telemetry: Mark useOtelWithSDKConfigurationForInternalTelemetry as stable (#​7532)
• mdatagen: Use cobra for the command, add version flag (#​11196)

🧰 Bug fixes 🧰

• service: Ensure process telemetry is registered when internal telemetry is configured with readers instead of an address. (#​11093)

• mdatagen: Fix incorrect generation of metric tests with boolean attributes. (#​11169)

• otelcol: Fix the Windows Event Log configuration when running the Collector as a Windows service. (#​5297, #​11051)

• builder: Honor build_tags in config (#​11156)

• builder: Fix version for providers in the default config (#​11123)

• cmd/builder: Temporarily disable strict versioning checks (#​11129, #​11152)
  The strict versioning check may be enabled by default in a future version once all configuration providers are stabilized.

• confmap: Fix loading config of a component from a different source. (#​11154)
  This issue only affected loading the whole component config, loading parts of a component config from a different source was working correctly.

v0.109.0

Compare Source

🛑 Breaking changes 🛑

• scraperhelper: Remove deprecated ObsReport, ObsReportSettings, NewObsReport types/funcs (#​11086)
• confmap: Remove stable confmap.strictlyTypedInput gate (#​11008)
• confmap: Removes stable confmap.unifyEnvVarExpansion feature gate. (#​11007)
• ballastextension: Removes the deprecated ballastextension (#​10671)
• service: Removes stable service.disableOpenCensusBridge feature gate (#​11009)

🚩 Deprecations 🚩

• processorhelper: These funcs are not used anywhere, marking them deprecated. (#​11083)

🚀 New components 🚀

• extension/experimental/storage: Move extension/experimental/storage into a separate module (#​11022)

💡 Enhancements 💡

• configtelemetry: Add guidelines for each level of component telemetry (#​10286)

• service: move useOtelWithSDKConfigurationForInternalTelemetry gate to beta (#​11091)

• service: implement a no-op tracer provider that doesn't propagate the context (#​11026)
  The no-op tracer provider supported by the SDK incurs a memory cost of propagating the context no matter
  what. This is not needed if tracing is not enabled in the Collector. This implementation of the no-op tracer
  provider removes the need to allocate memory when tracing is disabled.

• envprovider: Mark module as stable (#​10982)

• fileprovider: Mark module as stable (#​10983)

• processor: Add incoming and outgoing counts for processors using processorhelper. (#​10910)
  Any processor using the processorhelper package (this is most processors) will automatically report
  incoming and outgoing item counts. The new metrics are:

  • otelcol_processor_incoming_spans
  • otelcol_processor_outgoing_spans
  • otelcol_processor_incoming_metric_points
  • otelcol_processor_outgoing_metric_points
  • otelcol_processor_incoming_log_records
  • otelcol_processor_outgoing_log_records

🧰 Bug fixes 🧰

• configgrpc: Change the value of max_recv_msg_size_mib from uint64 to int to avoid a case where misconfiguration caused an integer overflow. (#​10948)
• exporterqueue: Fix a bug in persistent queue that Offer can becomes deadlocked when queue is almost full (#​11015)

v0.108.1

Compare Source

🧰 Bug fixes 🧰

• mdatagen: Fix a missing import in the generated test file (#​10969)

v0.108.0

Compare Source

🛑 Breaking changes 🛑

• all: Added support for go1.23, bumped the minimum version to 1.22 (#​10869)
• otelcol: Remove deprecated ConfmapProvider interface. (#​10934)
• confmap: Mark confmap.strictlyTypedInput as stable (#​10552)

💡 Enhancements 💡

• exporter/otlp: Add batching option to otlp exporter (#​8122)
• builder: Add a --skip-new-go-module flag to skip creating a module in the output directory. (#​9252)
• component: Add TelemetrySettings.LeveledMeterProvider func to replace MetricsLevel in the near future (#​10931)
• mdatagen: Add LeveledMeter method to mdatagen (#​10933)
• service: Adds level configuration option to service::telemetry::trace to allow users to disable the default TracerProvider (#​10892)
  This replaces the feature gate service.noopTracerProvider introduced in v0.107.0
• componentstatus: Add new Reporter interface to define how to report a status via a component.Host implementation (#​10852)
• mdatagen: support using a different github project in mdatagen README issues list (#​10484)
• mdatagen: Updates mdatagen's usage to output a complete command line example, including the metadata.yaml file. (#​10886)
• extension: Add ModuleInfo to extension.Settings to allow extensions to access component go module information. (#​10876)
• confmap: Mark module as stable (#​9379)

🧰 Bug fixes 🧰

• batchprocessor: Update units for internal telemetry (#​10652)
• confmap: Fix bug where an unset env var used with a non-string field resulted in a panic (#​10950)
• service: Fix memory leaks during service package shutdown (#​9165)
• mdatagen: Update generated telemetry template to only include context import when there are async metrics. (#​10883)
• mdatagen: Fixed bug in which setting SkipLifecycle & SkipShutdown to true would result in a generated file with an unused import confmaptest (#​10866)
• confmap: Use string representation for field types where all primitive types are strings. (#​10937)
• otelcol: Preserve internal representation when unmarshaling component configs (#​10552)

v0.107.0

Compare Source

🛑 Breaking changes 🛑

• service: Remove OpenCensus bridge completely, mark feature gate as stable. (#​10414)
• confmap: Set the confmap.unifyEnvVarExpansion feature gate to Stable. Expansion of $FOO env vars is no longer supported. Use ${FOO} or ${env:FOO} instead. (#​10508)
• service: Remove otelcol from Prometheus configuration. This means that any metric that isn't explicitly prefixed with otelcol_ no longer have that prefix. (#​9759)

💡 Enhancements 💡

• mdatagen: export ScopeName in internal/metadata package (#​10845)
  This can be used by components that need to set their scope name manually. Will save component owners from having to store a variable, which may diverge from the scope name used by the component for emitting its own telemetry.

• semconv: Add v1.26.0 semantic conventions package (#​10249, #​10829)

• mdatagen: Expose a setting on tests::host to set up your own host initialization code (#​10765)
  Some receivers require a host that has additional capabilities such as exposing exporters.
  For those, we can expose a setting that allows them to place a different host in the generated code.

• confmap: Allow using any YAML structure as a string when loading configuration. (#​10800)
  Previous to this change, slices could not be used as strings in configuration.

• ocb: migrate build and release of ocb binaries to opentelemetry-collector-releases repository (#​10710)
  ocb binaries will now be released under open-telemetry/opentelemetry-collector-releases tagged as "cmd/builder/vX.XXX.X"

• semconv: Add semantic conventions version v1.27.0 (#​10837)

• client: Mark module as stable. (#​10775)

🧰 Bug fixes 🧰

• configtelemetry: Add 10s read header timeout on the configtelemetry Prometheus HTTP server. (#​5699)

• service: Allow users to disable the tracer provider via the feature gate service.noopTracerProvider (#​10858)
  The service is returning an instance of a SDK tracer provider regardless of whether there were any processors configured causing resources to be consumed unnecessarily.

• processorhelper: Fix processor metrics not being reported initially with 0 values. (#​10855)

• service: Implement the temporality_preference setting for internal telemetry exported via OTLP (#​10745)

• configauth: Fix unmarshaling of authentication in HTTP servers. (#​10750)

• confmap: If loading an invalid YAML string through a provider, use it verbatim instead of erroring out. (#​10759)
  This makes the ${env:ENV} syntax closer to how ${ENV} worked before unifying syntaxes.

• component: Allow component names of up to 1024 characters in length. (#​10816)

• confmap: Remove original string representation if invalid. (#​10787)

v0.106.1

Compare Source

🧰 Bug fixes 🧰

• configauth: Fix unmarshaling of authentication in HTTP servers. (#​10750)

v0.106.0

Compare Source

🛑 Breaking changes 🛑

• service: Update all metrics to include otelcol_ prefix to ensure consistency across OTLP and Prometheus metrics (#​9759)
  This change is marked as a breaking change as anyone that was using OTLP for metrics will
  see the new prefix which was not present before. Prometheus generated metrics remain
  unchanged.

• confighttp: Delete ClientConfig.CustomRoundTripper (#​8627)
  Set (*http.Client).Transport on the *http.Client returned from ToClient to configure this.

• confmap: When passing configuration for a string field using any provider, use the verbatim string representation as the value. (#​10605, #​10405)
  This matches the behavior of ${ENV} syntax prior to the promotion of the confmap.unifyEnvVarExpansion feature gate
  to beta. It changes the behavior of the ${env:ENV} syntax with escaped strings.

• component: Adds restrictions on the character set for component.ID name. (#​10673)

• processor/memorylimiter: The memory limiter processor will no longer account for ballast size. (#​10696)
  If you are already using GOMEMLIMIT instead of the ballast extension this does not affect you.

• extension/memorylimiter: The memory limiter extension will no longer account for ballast size. (#​10696)
  If you are already using GOMEMLIMIT instead of the ballast extension this does not affect you.

• service: The service will no longer be able to get a ballast size from the deprecated ballast extension. (#​10696)
  If you are already using GOMEMLIMIT instead of the ballast extension this does not affect you.

🚀 New components 🚀

• client: Create a new go module go.opentelemetry.io/collector/client (#​9804)
  This module contains generic representations of clients connecting to different receivers.

💡 Enhancements 💡

• exporterhelper: Add data_type attribute to otelcol_exporter_queue_size metric to report the type of data being processed. (#​9943)
• confighttp: Add option to include query params in auth context (#​4806)
• configgrpc: gRPC auth errors now return gRPC status code UNAUTHENTICATED (16) (#​7646)
• httpprovider, httpsprovider: Validate URIs in HTTP and HTTPS providers before fetching. (#​10468)

🧰 Bug fixes 🧰

• processorhelper: update units for internal telemetry (#​10647)
• confmap: Increase the amount of recursion and URI expansions allowed in a single line (#​10712)
• exporterhelper: There is no guarantee that after the exporterhelper sends the plog/pmetric/ptrace data downstream that the data won't be mutated in some way. (e.g by the batch_sender) This mutation could result in the proceeding call to req.ItemsCount() to provide inaccurate information to be logged. (#​10033)
• exporterhelper: Update units for internal telemetry (#​10648)
• receiverhelper: Update units for internal telemetry (#​10650)
• scraperhelper: Update units for internal telemetry (#​10649)
• service: Use Command/Version to populate service name/version attributes (#​10644)

v0.105.0

Compare Source

🛑 Breaking changes 🛑

• service: add service.disableOpenCensusBridge feature gate which is enabled by default to remove the dependency on OpenCensus (#​10414)
• confmap: Promote confmap.strictlyTypedInput feature gate to beta. (#​10552)
  This feature gate changes the following:
  • Configurations relying on the implicit type casting behaviors listed on #​9532 will start to fail.
  • Configurations using URI expansion (i.e. field: ${env:ENV}) for string-typed fields will use the value passed in ENV verbatim without intermediate type casting.

💡 Enhancements 💡

• configtls: Mark module as stable. (#​9377)
• confmap: Remove extra closing parenthesis in sub-config error (#​10480)
• configgrpc: Update the default load balancer strategy to round_robin (#​10319)
  To restore the behavior that was previously the default, set balancer_name to pick_first.
• cmd/builder: Add go module info the builder generated code. (#​10570)
• otelcol: Add go module to components subcommand. (#​10570)
• confmap: Add explanation to errors related to confmap.strictlyTypedInput feature gate. (#​9532)
• confmap: Allow using map[string]any values in string interpolation (#​10605)

🧰 Bug fixes 🧰

• builder: provide context when a module in the config is missing its gomod value (#​10474)
• confmap: Fixes issue where confmap could not escape $$ when confmap.unifyEnvVarExpansion is enabled. (#​10560)
• mdatagen: fix generated comp test for extensions and unused imports in templates (#​10477)
• otlpreceiver: Fixes a bug where the otlp receiver's http response was not properly translating grpc error codes to http status codes. (#​10574)
• exporterhelper: Fix incorrect deduplication of otelcol_exporter_queue_size and otelcol_exporter_queue_capacity metrics if multiple exporters are used. (#​10444)
• service/telemetry: Add ability to set service.name for spans emitted by the Collector (#​10489)
• internal/localhostgate: Correctly log info message when component.UseLocalHostAsDefaultHost is enabled (#​8510)

v0.104.0

Compare Source

This release includes 2 very important breaking changes.

1. The otlpreceiver will now use localhost by default instead of 0.0.0.0. This may break the receiver in containerized environments like Kubernetes. If you depend on 0.0.0.0 disable the component.UseLocalHostAsDefaultHost feature gate or explicitly set the endpoint to 0.0.0.0.
2. Expansion of BASH-style environment variables, such as $FOO will no longer be supported by default. If you depend on this syntax, disable the confmap.unifyEnvVarExpansion feature gate, but know that the feature will be removed in the future in favor of ${env:FOO}.

🛑 Breaking changes 🛑

• filter: Remove deprecated filter.CombinedFilter (#​10348)
• otelcol: By default, otelcol.NewCommand and otelcol.NewCommandMustSetProvider will set the DefaultScheme to env. (#​10435)
• expandconverter: By default expandconverter will now error if it is about to expand $FOO syntax. Update configuration to use ${env:FOO} instead or disable the confmap.unifyEnvVarExpansion feature gate. (#​10435)
• otlpreceiver: Switch to localhost as the default for all endpoints. (#​8510)
  Disable the component.UseLocalHostAsDefaultHost feature gate to temporarily get the previous default.

💡 Enhancements 💡

• confighttp: Add support for cookies in HTTP clients with cookies::enabled. (#​10175)
  The method confighttp.ToClient will return a client with a cookiejar.Jar which will reuse cookies from server responses in subsequent requests.
• exporter/debug: In normal verbosity, display one line of text for each telemetry record (log, data point, span) (#​7806)
• exporter/debug: Add option use_internal_logger (#​10226)
• configretry: Mark module as stable. (#​10279)
• debugexporter: Print Span.TraceState() when present. (#​10421)
  Enables viewing sampling threshold information (as by OTEP 235 samplers).
• processorhelper: Add "inserted" metrics for processors. (#​10353)
  This includes the following metrics for processors:
  • processor_inserted_spans
  • processor_inserted_metric_points
  • processor_inserted_log_records

🧰 Bug fixes 🧰

• otlpexporter: Update validation to support both dns:// and dns:/// (#​10449)
• service: Fixed a bug that caused otel-collector to fail to start with ipv6 metrics endpoint service

---

Configuration

📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

---

• If you want to rebase/retry this PR, check this box

---

This PR was generated by Mend Renovate. View the repository job log.

[renovate]

ℹ Artifact update notice

File name: go.mod

In order to perform the update(s) described in the table above, Renovate ran the go get command, which resulted in the following additional change(s):

• 35 additional dependencies were updated
• The go directive was updated for compatibility reasons

Details:

Package	Change
go	1.20 -> 1.24.0
github.com/stretchr/testify	v1.8.4 -> v1.11.1
go.opentelemetry.io/collector/component	v0.93.0 -> v1.43.0
golang.org/x/sys	v0.16.0 -> v0.35.0
cloud.google.com/go/compute/metadata	v0.2.4-0.20230617002413-005d2dfb6b68 -> v0.7.0
github.com/GoogleCloudPlatform/opentelemetry-operations-go/detectors/gcp	v1.21.0 -> v1.29.0
github.com/cespare/xxhash/v2	v2.2.0 -> v2.3.0
github.com/cncf/xds/go	v0.0.0-20230607035331-e9ce68804cb4 -> v0.0.0-20250501225837-2ac532fd4443
github.com/envoyproxy/go-control-plane	v0.11.1 -> v0.13.4
github.com/envoyproxy/protoc-gen-validate	v1.0.2 -> v1.2.1
github.com/go-logr/logr	v1.4.1 -> v1.4.3
github.com/golang/protobuf	v1.5.3 -> v1.5.4
github.com/google/go-cmp	v0.6.0 -> v0.7.0
github.com/hashicorp/go-version	v1.6.0 -> v1.7.0
github.com/modern-go/reflect2	v1.0.2 -> v1.0.3-0.20250322232337-35a7c28c31ee
github.com/prometheus/client_model	v0.5.0 -> v0.6.1
github.com/stretchr/objx	v0.5.0 -> v0.5.2
go.opentelemetry.io/collector/config/configtelemetry	v0.93.0 -> v0.117.0
go.opentelemetry.io/otel	v1.22.0 -> v1.38.0
go.opentelemetry.io/otel/metric	v1.22.0 -> v1.38.0
go.opentelemetry.io/otel/sdk	v1.22.0 -> v1.38.0
go.opentelemetry.io/otel/sdk/metric	v1.22.0 -> v1.38.0
go.opentelemetry.io/otel/trace	v1.22.0 -> v1.38.0
go.uber.org/zap	v1.26.0 -> v1.27.0
golang.org/x/crypto	v0.18.0 -> v0.39.0
golang.org/x/mod	v0.14.0 -> v0.25.0
golang.org/x/net	v0.20.0 -> v0.41.0
golang.org/x/oauth2	v0.16.0 -> v0.30.0
golang.org/x/term	v0.16.0 -> v0.32.0
golang.org/x/text	v0.14.0 -> v0.26.0
golang.org/x/tools	v0.16.0 -> v0.33.0
gonum.org/v1/gonum	v0.14.0 -> v0.16.0
google.golang.org/genproto/googleapis/api	v0.0.0-20240102182953-50ed04b92917 -> v0.0.0-20250707201910-8d1bb00bc6a7
google.golang.org/genproto/googleapis/rpc	v0.0.0-20240102182953-50ed04b92917 -> v0.0.0-20250707201910-8d1bb00bc6a7
google.golang.org/grpc	v1.60.1 -> v1.75.1
google.golang.org/protobuf	v1.32.0 -> v1.36.9