angler: initial device commit

Change-Id: I811aec6a4bb098af352d0909e518f41cb22f5263

Android.mk

@@ -0,0 +1,32 @@
+#
+# Copyright 2015 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This contains the module build definitions for the hardware-specific
+# components for this device.
+#
+# As much as possible, those components should be built unconditionally,
+# with device-specific names to avoid collisions, to avoid device-specific
+# bitrot and build breakages. Building a component unconditionally does
+# *not* include it on all devices, so it is safe even with hardware-specific
+# components.
+
+ifneq ($(filter angler, $(TARGET_DEVICE)),)
+
+LOCAL_PATH := $(call my-dir)
+
+include $(call all-makefiles-under,$(LOCAL_PATH))
+
+endif

AndroidProducts.mk

@@ -0,0 +1,18 @@
+#
+# Copyright 2015 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+PRODUCT_MAKEFILES := \
+    $(LOCAL_DIR)/aosp_angler.mk

BoardConfig.mk

@@ -0,0 +1,102 @@
+#
+# Copyright (C) 2015 The Android Open-Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+TARGET_BOARD_PLATFORM := msm8994
+TARGET_BOOTLOADER_BOARD_NAME := angler
+
+TARGET_ARCH := arm64
+TARGET_ARCH_VARIANT := armv8-a
+TARGET_CPU_ABI := arm64-v8a
+TARGET_CPU_ABI2 :=
+TARGET_CPU_VARIANT := generic
+
+TARGET_2ND_ARCH := arm
+TARGET_2ND_ARCH_VARIANT := armv7-a-neon
+TARGET_2ND_CPU_ABI := armeabi-v7a
+TARGET_2ND_CPU_ABI2 := armeabi
+# TODO: FIX
+TARGET_2ND_CPU_VARIANT := cortex-a9
+#ifneq ($(TARGET_USES_AOSP), true)
+#TARGET_2ND_CPU_VARIANT := cortex-a53
+#else
+#TARGET_2ND_CPU_VARIANT := cortex-a9
+#endif
+
+BOARD_KERNEL_BASE        := 0x00000000
+BOARD_KERNEL_PAGESIZE    := 4096
+BOARD_KERNEL_TAGS_OFFSET := 0x01E00000
+BOARD_RAMDISK_OFFSET     := 0x02000000
+
+BOARD_KERNEL_CMDLINE := console=ttyHSL0,115200,n8 androidboot.hardware=angler androidboot.console=ttyHSL0 msm_rtb.filter=0x37 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 boot_cpus=0-3 androidboot.selinux=permissive
+BOARD_MKBOOTIMG_ARGS := --ramdisk_offset BOARD_RAMDISK_OFFSET --tags_offset BOARD_KERNEL_TAGS_OFFSET
+
+BOARD_USES_ALSA_AUDIO := true
+BOARD_HAVE_BLUETOOTH := true
+BOARD_HAVE_BLUETOOTH_BCM := true
+BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := device/huawei/angler/bluetooth
+
+BOARD_USES_SECURE_SERVICES := true
+
+TARGET_NO_BOOTLOADER := true
+TARGET_NO_RADIOIMAGE := true
+TARGET_BOARD_INFO_FILE := device/huawei/angler/board-info.txt
+TARGET_NO_RPC := true
+
+BOARD_EGL_CFG := device/huawei/angler/egl.cfg
+
+# Shader cache config options
+# Maximum size of the  GLES Shaders that can be cached for reuse.
+# Increase the size if shaders of size greater than 12KB are used.
+MAX_EGL_CACHE_KEY_SIZE := 12*1024
+
+# Maximum GLES shader cache size for each app to store the compiled shader
+# binaries. Decrease the size if RAM or Flash Storage size is a limitation
+# of the device.
+MAX_EGL_CACHE_SIZE := 2048*1024
+
+USE_OPENGL_RENDERER := true
+TARGET_USES_ION := true
+TARGET_USES_C2D_COMPOSITION := true
+
+HAVE_ADRENO_SOURCE:= false
+
+OVERRIDE_RS_DRIVER:= libRSDriver_adreno.so
+
+TARGET_USERIMAGES_USE_EXT4 := true
+BOARD_BOOTIMAGE_PARTITION_SIZE := 33554432
+BOARD_RECOVERYIMAGE_PARTITION_SIZE := 33554432
+BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1342177280
+BOARD_USERDATAIMAGE_PARTITION_SIZE := 13788503552
+BOARD_CACHEIMAGE_PARTITION_SIZE := 134217728
+BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
+BOARD_FLASH_BLOCK_SIZE := 131072
+
+BOARD_HAL_STATIC_LIBRARIES := libdumpstate.angler
+
+TARGET_RECOVERY_FSTAB = device/huawei/angler/fstab.angler
+
+BOARD_SEPOLICY_DIRS += \
+	device/huawei/angler/sepolicy
+
+BOARD_SEPOLICY_UNION += \
+	file.te \
+	surfaceflinger.te \
+	ueventd.te \
+	file_contexts
+
+TARGET_USES_64_BIT_BINDER := true
+
+-include vendor/huawei/angler/BoardConfigVendor.mk

CleanSpec.mk

@@ -0,0 +1,47 @@
+# Copyright 2015 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# If you don't need to do a full clean build but would like to touch
+# a file or delete some intermediate files, add a clean step to the end
+# of the list.  These steps will only be run once, if they haven't been
+# run before.
+#
+# E.g.:
+#     $(call add-clean-step, touch -c external/sqlite/sqlite3.h)
+#     $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libz_intermediates)
+#
+# Always use "touch -c" and "rm -f" or "rm -rf" to gracefully deal with
+# files that are missing or have been moved.
+#
+# Use $(PRODUCT_OUT) to get to the "out/target/product/blah/" directory.
+# Use $(OUT_DIR) to refer to the "out" directory.
+#
+# If you need to re-do something that's already mentioned, just copy
+# the command and add it to the bottom of the list.  E.g., if a change
+# that you made last week required touching a file and a change you
+# made today requires touching the same file, just copy the old
+# touch step and add it to the end of the list.
+#
+# ************************************************
+# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
+# ************************************************
+
+# For example:
+#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/AndroidTests_intermediates)
+#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/core_intermediates)
+#$(call add-clean-step, find $(OUT_DIR) -type f -name "IGTalkSession*" -print0 | xargs -0 rm -f)
+#$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/*)
+
+$(call add-clean-step, rm -rf $(OUT_DIR)/target/product/angler/system/build.prop)

aosp_angler.mk

@@ -0,0 +1,35 @@
+#
+# Copyright 2015 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# Sample: This is where we'd set a backup provider if we had one
+# $(call inherit-product, device/sample/products/backup_overlay.mk)
+
+# Get the long list of APNs
+PRODUCT_COPY_FILES := device/sample/etc/apns-full-conf.xml:system/etc/apns-conf.xml
+
+# Inherit from the common Open Source product configuration
+$(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base_telephony.mk)
+
+PRODUCT_NAME := aosp_angler
+PRODUCT_DEVICE := angler
+PRODUCT_BRAND := Android
+PRODUCT_MODEL := AOSP on angler
+PRODUCT_MANUFACTURER := Huawei
+PRODUCT_RESTRICT_VENDOR_FILES := true
+
+$(call inherit-product, device/huawei/angler/device.mk)
+$(call inherit-product-if-exists, vendor/huawei/angler/device-vendor.mk)