readme

Tavern64

A versatile 65-ish percent keyboard where (almost) everything is optional.

Features

• MX, Choc V1 & V2 switch support with multiple options:
  1. MX AND Choc hot-swap sockets, NO per-key RGB
  2. MX hot-swap sockets, NO per-key RGB
  3. Choc hot-swap sockets, NO per-key RGB
  4. MX hot-swap sockets AND per-key RGB
  5. Choc hot-swap sockets AND per-key RGB
• Split spacebar layouts:
  1. Full size (6.25u)
  2. Split A (2.25u, 1.25u, 2.75u)
  3. Split B(2u, 2u, 2u)
• Encoders*
• OLED screen*
• Audio buzzer* with volume control*
• RGB Matrix*
• RGB Under glow*
• Indicator LEDs*
  • Caps Lock, Num Lock, Scroll Lock
• Gasket or case mountable
• Surface-mount or through-hole components:
  • Diodes
  • Resistors
  • Buzzer

*: optional feature

Hardware required

Description	Part Name	Max # Needed	URL
Hot-swap sockets	MX hot-swap socket OR Choc Hot-swap socket	67
RGB LED mini	SK6812 mini-e	65
RGB Strip	WS2812B	1m
Diodes	1N4148	67
Resistor A	100R	1
Resistor B	220R	1
Volume Switch	SP3T / 1P3T Switch, 6mm	1
Pin Headers		40
Microcontroller	RP2040 Pi Pico (purple)	1
Buzzer	8530 Passive	1
Encoder	EC11	3
Large LED	5mm LED	1
Medium LED	3mm LED	3
OLED Screen	0.96” 128x64 I2C OLED, OR 0.91” 128x32 I2C OLED	1
Reset Switch*		1
Case Screws	M2 6mm Button Head Hex	10
OLED Screws	M2 4mm Button Head Philips	2
OLED Standoffs	M2 6mm Standoffs	2
Gaskets	PORON Foam 2mm	6

Bootloader

Enter the bootloader in 3 ways:

• Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
• Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
• Keycode in layout: Press the key mapped to QK_BOOT if it is available