Merge tag 'v3.18.131' into XOS-8.1

This is the 3.18.131 stable release

* tag 'v3.18.131': (32 commits)
  Linux 3.18.131
  wil6210: missing length check in wmi_set_ie
  swiotlb: clean up reporting
  sr: pass down correctly sized SCSI sense buffer
  posix-timers: Sanitize overrun handling
  ALSA: pcm: remove SNDRV_PCM_IOCTL1_INFO internal command
  ALSA: isa/wavefront: prevent some out of bound writes
  i2c: scmi: Fix probe error on devices with an empty SMB0001 ACPI device node
  cifs: In Kconfig CONFIG_CIFS_POSIX needs depends on legacy (insecure cifs)
  ARM: 8814/1: mm: improve/fix ARM v7_dma_inv_range() unaligned address handling
  libata: whitelist all SAMSUNG MZ7KM* solid-state disks
  Input: omap-keypad - fix keyboard debounce configuration
  ide: pmac: add of_node_put()
  drivers/tty: add missing of_node_put()
  drivers/sbus/char: add of_node_put()
  sbus: char: add of_node_put()
  SUNRPC: Fix a potential race in xprt_connect()
  bonding: fix 802.3ad state sent to partner when unbinding slave
  x86/earlyprintk/efi: Fix infinite loop on some screen widths
  scsi: vmw_pscsi: Rearrange code to avoid multiple calls to free_irq during unload
  ...

Signed-off-by: Harsh Shandilya <[email protected]>

Makefile

@@ -1,6 +1,6 @@
 VERSION = 3
 PATCHLEVEL = 18
-SUBLEVEL = 130
+SUBLEVEL = 131
 EXTRAVERSION =
 NAME = Diseased Newt
 

arch/arm/mm/cache-v7.S

@@ -359,14 +359,16 @@ ENTRY(v7_dma_inv_range)
 	ALT_UP(W(nop))
 #endif
 	mcrne	p15, 0, r0, c7, c14, 1		@ clean & invalidate D / U line
+	addne	r0, r0, r2
 
 	tst	r1, r3
 	bic	r1, r1, r3
 	mcrne	p15, 0, r1, c7, c14, 1		@ clean & invalidate D / U line
-1:
-	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D / U line
-	add	r0, r0, r2
 	cmp	r0, r1
+1:
+	mcrlo	p15, 0, r0, c7, c6, 1		@ invalidate D / U line
+	addlo	r0, r0, r2
+	cmplo	r0, r1
 	blo	1b
 	dsb	st
 	ret	lr

arch/powerpc/boot/Makefile

@@ -67,7 +67,8 @@ $(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o): \
 libfdt       := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
 libfdtheader := fdt.h libfdt.h libfdt_internal.h
 
-$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o): \
+$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o \
+	treeboot-akebono.o treeboot-currituck.o treeboot-iss4xx.o): \
 	$(addprefix $(obj)/,$(libfdtheader))
 
 src-wlib-y := string.S crt0.S crtsavres.S stdio.c main.c \

arch/powerpc/kernel/legacy_serial.c

@@ -370,6 +370,8 @@ void __init find_legacy_serial_ports(void)
 
 	/* Now find out if one of these is out firmware console */
 	path = of_get_property(of_chosen, "linux,stdout-path", NULL);
+	if (path == NULL)
+		path = of_get_property(of_chosen, "stdout-path", NULL);
 	if (path != NULL) {
 		stdout = of_find_node_by_path(path);
 		if (stdout)
@@ -593,8 +595,10 @@ static int __init check_legacy_serial_console(void)
 	/* We are getting a weird phandle from OF ... */
 	/* ... So use the full path instead */
 	name = of_get_property(of_chosen, "linux,stdout-path", NULL);
+	if (name == NULL)
+		name = of_get_property(of_chosen, "stdout-path", NULL);
 	if (name == NULL) {
-		DBG(" no linux,stdout-path !\n");
+		DBG(" no stdout-path !\n");
 		return -ENODEV;
 	}
 	prom_stdout = of_find_node_by_path(name);

arch/x86/platform/efi/early_printk.c

@@ -179,7 +179,7 @@ early_efi_write(struct console *con, const char *str, unsigned int num)
 			num--;
 		}
 
-		if (efi_x >= si->lfb_width) {
+		if (efi_x + font->width > si->lfb_width) {
 			efi_x = 0;
 			efi_y += font->height;
 		}

drivers/ata/libata-core.c

@@ -4295,6 +4295,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "SSD*INTEL*",			NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Samsung*SSD*",		NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "SAMSUNG*SSD*",		NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
+	{ "SAMSUNG*MZ7KM*",		NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "ST[1248][0248]0[FH]*",	NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
 
 	/* devices that don't properly handle TRIM commands */

drivers/i2c/busses/i2c-scmi.c

@@ -364,6 +364,7 @@ static int acpi_smbus_cmi_add(struct acpi_device *device)
 {
 	struct acpi_smbus_cmi *smbus_cmi;
 	const struct acpi_device_id *id;
+	int ret;
 
 	smbus_cmi = kzalloc(sizeof(struct acpi_smbus_cmi), GFP_KERNEL);
 	if (!smbus_cmi)
@@ -385,8 +386,10 @@ static int acpi_smbus_cmi_add(struct acpi_device *device)
 	acpi_walk_namespace(ACPI_TYPE_METHOD, smbus_cmi->handle, 1,
 			    acpi_smbus_cmi_query_methods, NULL, smbus_cmi, NULL);
 
-	if (smbus_cmi->cap_info == 0)
+	if (smbus_cmi->cap_info == 0) {
+		ret = -ENODEV;
 		goto err;
+	}
 
 	snprintf(smbus_cmi->adapter.name, sizeof(smbus_cmi->adapter.name),
 		"SMBus CMI adapter %s",
@@ -397,7 +400,8 @@ static int acpi_smbus_cmi_add(struct acpi_device *device)
 	smbus_cmi->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	smbus_cmi->adapter.dev.parent = &device->dev;
 
-	if (i2c_add_adapter(&smbus_cmi->adapter)) {
+	ret = i2c_add_adapter(&smbus_cmi->adapter);
+	if (ret) {
 		dev_err(&device->dev, "Couldn't register adapter!\n");
 		goto err;
 	}
@@ -407,7 +411,7 @@ static int acpi_smbus_cmi_add(struct acpi_device *device)
 err:
 	kfree(smbus_cmi);
 	device->driver_data = NULL;
-	return -EIO;
+	return ret;
 }
 
 static int acpi_smbus_cmi_remove(struct acpi_device *device)

drivers/ide/pmac.c

@@ -920,6 +920,7 @@ static u8 pmac_ide_cable_detect(ide_hwif_t *hwif)
 	struct device_node *root = of_find_node_by_path("/");
 	const char *model = of_get_property(root, "model", NULL);
 
+	of_node_put(root);
 	/* Get cable type from device-tree. */
 	if (cable && !strncmp(cable, "80-", 3)) {
 		/* Some drives fail to detect 80c cable in PowerBook */

drivers/input/keyboard/omap4-keypad.c

@@ -60,8 +60,18 @@
 
 /* OMAP4 values */
 #define OMAP4_VAL_IRQDISABLE		0x0
-#define OMAP4_VAL_DEBOUNCINGTIME	0x7
-#define OMAP4_VAL_PVT			0x7
+
+/*
+ * Errata i689: If a key is released for a time shorter than debounce time,
+ * the keyboard will idle and never detect the key release. The workaround
+ * is to use at least a 12ms debounce time. See omap5432 TRM chapter
+ * "26.4.6.2 Keyboard Controller Timer" for more information.
+ */
+#define OMAP4_KEYPAD_PTV_DIV_128        0x6
+#define OMAP4_KEYPAD_DEBOUNCINGTIME_MS(dbms, ptv)     \
+	((((dbms) * 1000) / ((1 << ((ptv) + 1)) * (1000000 / 32768))) - 1)
+#define OMAP4_VAL_DEBOUNCINGTIME_16MS					\
+	OMAP4_KEYPAD_DEBOUNCINGTIME_MS(16, OMAP4_KEYPAD_PTV_DIV_128)
 
 enum {
 	KBD_REVISION_OMAP4 = 0,
@@ -181,9 +191,9 @@ static int omap4_keypad_open(struct input_dev *input)
 
 	kbd_writel(keypad_data, OMAP4_KBD_CTRL,
 			OMAP4_DEF_CTRL_NOSOFTMODE |
-			(OMAP4_VAL_PVT << OMAP4_DEF_CTRL_PTV_SHIFT));
+			(OMAP4_KEYPAD_PTV_DIV_128 << OMAP4_DEF_CTRL_PTV_SHIFT));
 	kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
-			OMAP4_VAL_DEBOUNCINGTIME);
+			OMAP4_VAL_DEBOUNCINGTIME_16MS);
 	/* clear pending interrupts */
 	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
 			 kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));

drivers/mmc/host/omap.c

@@ -105,6 +105,7 @@ struct mmc_omap_slot {
 	unsigned int		vdd;
 	u16			saved_con;
 	u16			bus_mode;
+	u16			power_mode;
 	unsigned int		fclk_freq;
 
 	struct tasklet_struct	cover_tasklet;
@@ -1155,7 +1156,7 @@ static void mmc_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	struct mmc_omap_slot *slot = mmc_priv(mmc);
 	struct mmc_omap_host *host = slot->host;
 	int i, dsor;
-	int clk_enabled;
+	int clk_enabled, init_stream;
 
 	mmc_omap_select_slot(slot, 0);
 
@@ -1165,20 +1166,25 @@ static void mmc_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		slot->vdd = ios->vdd;
 
 	clk_enabled = 0;
+	init_stream = 0;
 	switch (ios->power_mode) {
 	case MMC_POWER_OFF:
 		mmc_omap_set_power(slot, 0, ios->vdd);
 		break;
 	case MMC_POWER_UP:
 		/* Cannot touch dsor yet, just power up MMC */
 		mmc_omap_set_power(slot, 1, ios->vdd);
+		slot->power_mode = ios->power_mode;
 		goto exit;
 	case MMC_POWER_ON:
 		mmc_omap_fclk_enable(host, 1);
 		clk_enabled = 1;
 		dsor |= 1 << 11;
+		if (slot->power_mode != MMC_POWER_ON)
+			init_stream = 1;
 		break;
 	}
+	slot->power_mode = ios->power_mode;
 
 	if (slot->bus_mode != ios->bus_mode) {
 		if (slot->pdata->set_bus_mode != NULL)
@@ -1194,7 +1200,7 @@ static void mmc_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	for (i = 0; i < 2; i++)
 		OMAP_MMC_WRITE(host, CON, dsor);
 	slot->saved_con = dsor;
-	if (ios->power_mode == MMC_POWER_ON) {
+	if (init_stream) {
 		/* worst case at 400kHz, 80 cycles makes 200 microsecs */
 		int usecs = 250;
 
@@ -1232,6 +1238,7 @@ static int mmc_omap_new_slot(struct mmc_omap_host *host, int id)
 	slot->host = host;
 	slot->mmc = mmc;
 	slot->id = id;
+	slot->power_mode = MMC_POWER_UNDEFINED;
 	slot->pdata = &host->pdata->slots[id];
 
 	host->slots[id] = slot;

drivers/net/bonding/bond_3ad.c

@@ -1906,6 +1906,9 @@ void bond_3ad_unbind_slave(struct slave *slave)
 		   aggregator->aggregator_identifier);
 
 	/* Tell the partner that this port is not suitable for aggregation */
+	port->actor_oper_port_state &= ~AD_STATE_SYNCHRONIZATION;
+	port->actor_oper_port_state &= ~AD_STATE_COLLECTING;
+	port->actor_oper_port_state &= ~AD_STATE_DISTRIBUTING;
 	port->actor_oper_port_state &= ~AD_STATE_AGGREGATION;
 	__update_lacpdu_from_port(port);
 	ad_lacpdu_send(port);

drivers/sbus/char/display7seg.c

@@ -221,6 +221,7 @@ static int d7s_probe(struct platform_device *op)
 	dev_set_drvdata(&op->dev, p);
 	d7s_device = p;
 	err = 0;
+	of_node_put(opts);
 
 out:
 	return err;

drivers/sbus/char/envctrl.c

@@ -910,8 +910,10 @@ static void envctrl_init_i2c_child(struct device_node *dp,
 			for (len = 0; len < PCF8584_MAX_CHANNELS; ++len) {
 				pchild->mon_type[len] = ENVCTRL_NOMON;
 			}
+			of_node_put(root_node);
 			return;
 		}
+		of_node_put(root_node);
 	}
 
 	/* Get the monitor channels. */

drivers/scsi/libiscsi.c

@@ -2433,8 +2433,8 @@ int iscsi_eh_session_reset(struct scsi_cmnd *sc)
 failed:
 		ISCSI_DBG_EH(session,
 			     "failing session reset: Could not log back into "
-			     "%s, %s [age %d]\n", session->targetname,
-			     conn->persistent_address, session->age);
+			     "%s [age %d]\n", session->targetname,
+			     session->age);
 		spin_unlock_bh(&session->frwd_lock);
 		mutex_unlock(&session->eh_mutex);
 		return FAILED;

drivers/scsi/sr_ioctl.c

@@ -187,30 +187,25 @@ int sr_do_ioctl(Scsi_CD *cd, struct packet_command *cgc)
 	struct scsi_device *SDev;
 	struct scsi_sense_hdr sshdr;
 	int result, err = 0, retries = 0;
-	struct request_sense *sense = cgc->sense;
+	unsigned char sense_buffer[SCSI_SENSE_BUFFERSIZE];
 
 	SDev = cd->device;
 
-	if (!sense) {
-		sense = kmalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
-		if (!sense) {
-			err = -ENOMEM;
-			goto out;
-		}
-	}
-
       retry:
 	if (!scsi_block_when_processing_errors(SDev)) {
 		err = -ENODEV;
 		goto out;
 	}
 
-	memset(sense, 0, sizeof(*sense));
+	memset(sense_buffer, 0, sizeof(sense_buffer));
 	result = scsi_execute(SDev, cgc->cmd, cgc->data_direction,
-			      cgc->buffer, cgc->buflen, (char *)sense,
+			      cgc->buffer, cgc->buflen, sense_buffer,
 			      cgc->timeout, IOCTL_RETRIES, 0, NULL);
 
-	scsi_normalize_sense((char *)sense, sizeof(*sense), &sshdr);
+	scsi_normalize_sense(sense_buffer, sizeof(sense_buffer), &sshdr);
+
+	if (cgc->sense)
+		memcpy(cgc->sense, sense_buffer, sizeof(*cgc->sense));
 
 	/* Minimal error checking.  Ignore cases we know about, and report the rest. */
 	if (driver_byte(result) != 0) {
@@ -272,8 +267,6 @@ int sr_do_ioctl(Scsi_CD *cd, struct packet_command *cgc)
 
 	/* Wake up a process waiting for device */
       out:
-	if (!cgc->sense)
-		kfree(sense);
 	cgc->stat = err;
 	return err;
 }

drivers/scsi/vmw_pvscsi.c

@@ -1225,8 +1225,6 @@ static void pvscsi_shutdown_intr(struct pvscsi_adapter *adapter)
 
 static void pvscsi_release_resources(struct pvscsi_adapter *adapter)
 {
-	pvscsi_shutdown_intr(adapter);
-
 	if (adapter->workqueue)
 		destroy_workqueue(adapter->workqueue);
 
@@ -1555,6 +1553,7 @@ static int pvscsi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 out_reset_adapter:
 	ll_adapter_reset(adapter);
 out_release_resources:
+	pvscsi_shutdown_intr(adapter);
 	pvscsi_release_resources(adapter);
 	scsi_host_put(host);
 out_disable_device:
@@ -1563,6 +1562,7 @@ static int pvscsi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	return error;
 
 out_release_resources_and_disable:
+	pvscsi_shutdown_intr(adapter);
 	pvscsi_release_resources(adapter);
 	goto out_disable_device;
 }

drivers/tty/serial/suncore.c

@@ -112,6 +112,7 @@ void sunserial_console_termios(struct console *con, struct device_node *uart_dp)
 		mode = of_get_property(dp, mode_prop, NULL);
 		if (!mode)
 			mode = "9600,8,n,1,-";
+		of_node_put(dp);
 	}
 
 	cflag = CREAD | HUPCL | CLOCAL;

fs/cifs/Kconfig

@@ -111,7 +111,7 @@ config CIFS_XATTR
 
 config CIFS_POSIX
         bool "CIFS POSIX Extensions"
-        depends on CIFS_XATTR
+        depends on CIFS && CIFS_ALLOW_INSECURE_LEGACY && CIFS_XATTR
         help
           Enabling this option will cause the cifs client to attempt to
 	  negotiate a newer dialect with servers, such as Samba 3.0.5

include/linux/posix-timers.h

@@ -65,8 +65,8 @@ struct k_itimer {
 	spinlock_t it_lock;
 	clockid_t it_clock;		/* which timer type */
 	timer_t it_id;			/* timer id */
-	int it_overrun;			/* overrun on pending signal  */
-	int it_overrun_last;		/* overrun on last delivered signal */
+	s64 it_overrun;			/* overrun on pending signal  */
+	s64 it_overrun_last;		/* overrun on last delivered signal */
 	int it_requeue_pending;		/* waiting to requeue this timer */
 #define REQUEUE_PENDING 1
 	int it_sigev_notify;		/* notify word of sigevent struct */

kernel/time/posix-cpu-timers.c

@@ -103,7 +103,7 @@ static void bump_cpu_timer(struct k_itimer *timer,
 			continue;
 
 		timer->it.cpu.expires += incr;
-		timer->it_overrun += 1 << i;
+		timer->it_overrun += 1LL << i;
 		delta -= incr;
 	}
 }