Add PrusaSlicer config file and text to BOM

BILLOFMATERIAL.md

@@ -5,6 +5,15 @@ This page includes an aggregated overview (incl. images) of all the parts needed
 * [On Google drive](https://docs.google.com/spreadsheets/d/1VdnPilA22OfAh9a1y4Ft6c2xkio206Dzv85h7AX7CmQ/edit?usp=sharing)
 * [Bill\_of\_material.xlsx](./Bill_of_material.xlsx)
 
+The 3d-printed parts were printed using:
+
+* 30% infill
+* 4 top solid horizontal layers
+* 4 bottom solid horizontal layers
+* 4 perimeters
+
+The complete PrusaSlicer config used can be found here: [prusa\_slicer\_config.ini](./prusa_slicer_config.ini)
+
 ## 3d-printed parts
 
 | Item No. | Type                                      | Amount | Image                                                                                                                                                   | STL-file                                                                                                                         | OBJ-file                                                                                                                         |

prusa_slicer_config.ini

@@ -0,0 +1,255 @@
+# generated by PrusaSlicer 2.3.0+ on 2021-11-23 at 21:54:38 UTC
+avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 5x5,305x5,305x305,5x305
+bed_temperature = 60
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n
+between_objects_gcode = 
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0
+bridge_acceleration = 0
+bridge_angle = 90
+bridge_fan_speed = 100
+bridge_flow_ratio = 0.95
+bridge_speed = 25
+brim_width = 0
+clip_multipart_objects = 1
+color_change_gcode = M600
+colorprint_heights = 
+compatible_printers_condition_cummulative = "printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4";printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/
+complete_objects = 1
+cooling = 1
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_acceleration = 0
+default_filament_profile = "Generic PLA @CREALITY"
+default_print_profile = 0.16mm OPTIMAL @CREALITY
+deretract_speed = 40
+disable_fan_first_layers = 1
+dont_support_bridges = 1
+draft_shield = 0
+duplicate_distance = 6
+elefant_foot_compensation = 0.1
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 25
+external_perimeters_first = 0
+extra_loading_move = -2
+extra_perimeters = 0
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
+extruder_colour = #FCE94F
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 0.45
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #F8FEFF
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 24.99
+filament_density = 1.24
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 15
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = "PrimaValue - White"
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = Prusa Polymers
+filament_wipe = nil
+fill_angle = 45
+fill_density = 30%
+fill_pattern = rectilinear
+first_layer_acceleration = 0
+first_layer_bed_temperature = 60
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 20
+first_layer_temperature = 200
+full_fan_speed_layer = 0
+gap_fill_speed = 30
+gcode_comments = 0
+gcode_flavor = marlin
+gcode_label_objects = 0
+high_current_on_filament_swap = 0
+host_type = octoprint
+infill_acceleration = 0
+infill_anchor = 600%
+infill_anchor_max = 50
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 50
+inherits_cummulative = "0.16mm OPTIMAL @CREALITY";"Prusament PLA @CREALITY";
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+layer_height = 0.16
+machine_limits_usage = emit_to_gcode
+machine_max_acceleration_e = 5000
+machine_max_acceleration_extruding = 500
+machine_max_acceleration_retracting = 1000
+machine_max_acceleration_x = 500
+machine_max_acceleration_y = 500
+machine_max_acceleration_z = 100
+machine_max_feedrate_e = 60
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
+machine_max_feedrate_z = 10
+machine_max_jerk_e = 5
+machine_max_jerk_x = 8
+machine_max_jerk_y = 8
+machine_max_jerk_z = 0.4
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+max_fan_speed = 100
+max_layer_height = 0.28
+max_print_height = 400
+max_print_speed = 100
+max_volumetric_speed = 0
+min_fan_speed = 100
+min_layer_height = 0.08
+min_print_speed = 15
+min_skirt_length = 4
+notes = 
+nozzle_diameter = 0.4
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+overhangs = 1
+parking_pos_retraction = 92
+pause_print_gcode = 
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 40
+perimeters = 4
+physical_printer_settings_id = 
+post_process = 
+print_host = 
+print_settings_id = 0.16mm OPTIMAL @CREALITY - PrimaValue - Slow - CNC
+printer_model = CR10SPROV2
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10SPROV2\nPRINTER_HAS_BOWDEN
+printer_settings_id = Creality CR-10 S Pro V2
+printer_technology = FFF
+printer_variant = 0.4
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+raft_layers = 0
+remaining_times = 0
+resolution = 0
+retract_before_travel = 2
+retract_before_wipe = 70%
+retract_layer_change = 1
+retract_length = 6
+retract_length_toolchange = 1
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 60
+seam_position = nearest
+silent_mode = 0
+single_extruder_multi_material = 0
+single_extruder_multi_material_priming = 1
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+slice_closing_radius = 0.049
+slowdown_below_layer_time = 20
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+start_filament_gcode = "; Filament gcode\n"
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.38
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 40
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+temperature = 190
+template_custom_gcode = 
+thin_walls = 0
+threads = 8
+thumbnails = 
+toolchange_gcode = 
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 30
+top_solid_layers = 4
+top_solid_min_thickness = 0
+travel_speed = 150
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+wipe_into_infill = 0
+wipe_into_objects = 0
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 140
+wiping_volumes_extruders = 70,70
+wiping_volumes_matrix = 0
+xy_size_compensation = 0.1
+z_offset = 0