Make TC BPF helpers preserve skb metadata

include/linux/if_vlan.h

@@ -355,16 +355,17 @@ static inline int __vlan_insert_inner_tag(struct sk_buff *skb,
 					  __be16 vlan_proto, u16 vlan_tci,
 					  unsigned int mac_len)
 {
+	const u8 meta_len = mac_len > ETH_TLEN ? skb_metadata_len(skb) : 0;
 	struct vlan_ethhdr *veth;
 
-	if (skb_cow_head(skb, VLAN_HLEN) < 0)
+	if (skb_cow_head(skb, meta_len + VLAN_HLEN) < 0)
 		return -ENOMEM;
 
 	skb_push(skb, VLAN_HLEN);
 
 	/* Move the mac header sans proto to the beginning of the new header. */
 	if (likely(mac_len > ETH_TLEN))
-		memmove(skb->data, skb->data + VLAN_HLEN, mac_len - ETH_TLEN);
+		skb_postpush_data_move(skb, VLAN_HLEN, mac_len - ETH_TLEN);
 	if (skb_mac_header_was_set(skb))
 		skb->mac_header -= VLAN_HLEN;
 
@@ -731,18 +732,16 @@ static inline void vlan_set_encap_proto(struct sk_buff *skb,
  *
  * Expects the skb to contain a VLAN tag in the payload, and to have skb->data
  * pointing at the MAC header.
- *
- * Returns: a new pointer to skb->data, or NULL on failure to pull.
  */
-static inline void *vlan_remove_tag(struct sk_buff *skb, u16 *vlan_tci)
+static inline void vlan_remove_tag(struct sk_buff *skb, u16 *vlan_tci)
 {
 	struct vlan_hdr *vhdr = (struct vlan_hdr *)(skb->data + ETH_HLEN);
 
 	*vlan_tci = ntohs(vhdr->h_vlan_TCI);
 
-	memmove(skb->data + VLAN_HLEN, skb->data, 2 * ETH_ALEN);
 	vlan_set_encap_proto(skb, vhdr);
-	return __skb_pull(skb, VLAN_HLEN);
+	__skb_pull(skb, VLAN_HLEN);
+	skb_postpull_data_move(skb, VLAN_HLEN, 2 * ETH_ALEN);
 }
 
 /**

include/linux/skbuff.h

@@ -4561,6 +4561,80 @@ static inline void skb_metadata_clear(struct sk_buff *skb)
 	skb_metadata_set(skb, 0);
 }
 
+/**
+ * skb_data_move - Move packet data and metadata after skb_push() or skb_pull().
+ * @skb: packet to operate on
+ * @len: number of bytes pushed or pulled from &sk_buff->data
+ * @n: number of bytes to memmove() from pre-push/pull &sk_buff->data
+ *
+ * Moves both packet data (@n bytes) and metadata. Assumes metadata is located
+ * immediately before &sk_buff->data prior to the push/pull, and that sufficient
+ * headroom exists to hold it after an skb_push(). Otherwise, metadata is
+ * cleared and a one-time warning is issued.
+ *
+ * Use skb_postpull_data_move() or skb_postpush_data_move() instead of calling
+ * this helper directly.
+ */
+static inline void skb_data_move(struct sk_buff *skb, const int len,
+				 const unsigned int n)
+{
+	const u8 meta_len = skb_metadata_len(skb);
+	u8 *meta, *meta_end;
+
+	if (!len || (!n && !meta_len))
+		return;
+
+	if (!meta_len)
+		goto no_metadata;
+
+	meta_end = skb_metadata_end(skb);
+	meta = meta_end - meta_len;
+
+	if (WARN_ON_ONCE(meta_end + len != skb->data ||
+			 meta_len > skb_headroom(skb))) {
+		skb_metadata_clear(skb);
+		goto no_metadata;
+	}
+
+	memmove(meta + len, meta, meta_len + n);
+	return;
+
+no_metadata:
+	memmove(skb->data, skb->data - len, n);
+}
+
+/**
+ * skb_postpull_data_move - Move packet data and metadata after skb_pull().
+ * @skb: packet to operate on
+ * @len: number of bytes pulled from &sk_buff->data
+ * @n: number of bytes to memmove() from pre-pull &sk_buff->data
+ *
+ * See skb_data_move() for details.
+ */
+static inline void skb_postpull_data_move(struct sk_buff *skb,
+					  const unsigned int len,
+					  const unsigned int n)
+{
+	DEBUG_NET_WARN_ON_ONCE(len > INT_MAX);
+	skb_data_move(skb, len, n);
+}
+
+/**
+ * skb_postpush_data_move - Move packet data and metadata after skb_push().
+ * @skb: packet to operate on
+ * @len: number of bytes pushed onto &sk_buff->data
+ * @n: number of bytes to memmove() from pre-push &sk_buff->data
+ *
+ * See skb_data_move() for details.
+ */
+static inline void skb_postpush_data_move(struct sk_buff *skb,
+					  const unsigned int len,
+					  const unsigned int n)
+{
+	DEBUG_NET_WARN_ON_ONCE(len > INT_MAX);
+	skb_data_move(skb, -len, n);
+}
+
 struct sk_buff *skb_clone_sk(struct sk_buff *skb);
 
 #ifdef CONFIG_NETWORK_PHY_TIMESTAMPING

net/core/filter.c

@@ -3260,11 +3260,11 @@ static void bpf_skb_change_protocol(struct sk_buff *skb, u16 proto)
 
 static int bpf_skb_generic_push(struct sk_buff *skb, u32 off, u32 len)
 {
-	/* Caller already did skb_cow() with len as headroom,
+	/* Caller already did skb_cow() with meta_len+len as headroom,
 	 * so no need to do it here.
 	 */
 	skb_push(skb, len);
-	memmove(skb->data, skb->data + len, off);
+	skb_postpush_data_move(skb, len, off);
 	memset(skb->data + off, 0, len);
 
 	/* No skb_postpush_rcsum(skb, skb->data + off, len)
@@ -3288,7 +3288,7 @@ static int bpf_skb_generic_pop(struct sk_buff *skb, u32 off, u32 len)
 	old_data = skb->data;
 	__skb_pull(skb, len);
 	skb_postpull_rcsum(skb, old_data + off, len);
-	memmove(skb->data, old_data, off);
+	skb_postpull_data_move(skb, len, off);
 
 	return 0;
 }
@@ -3333,10 +3333,11 @@ static int bpf_skb_net_hdr_pop(struct sk_buff *skb, u32 off, u32 len)
 static int bpf_skb_proto_4_to_6(struct sk_buff *skb)
 {
 	const u32 len_diff = sizeof(struct ipv6hdr) - sizeof(struct iphdr);
+	const u8 meta_len = skb_metadata_len(skb);
 	u32 off = skb_mac_header_len(skb);
 	int ret;
 
-	ret = skb_cow(skb, len_diff);
+	ret = skb_cow(skb, meta_len + len_diff);
 	if (unlikely(ret < 0))
 		return ret;
 
@@ -3496,6 +3497,7 @@ static int bpf_skb_net_grow(struct sk_buff *skb, u32 off, u32 len_diff,
 	u8 inner_mac_len = flags >> BPF_ADJ_ROOM_ENCAP_L2_SHIFT;
 	bool encap = flags & BPF_F_ADJ_ROOM_ENCAP_L3_MASK;
 	u16 mac_len = 0, inner_net = 0, inner_trans = 0;
+	const u8 meta_len = skb_metadata_len(skb);
 	unsigned int gso_type = SKB_GSO_DODGY;
 	int ret;
 
@@ -3506,7 +3508,7 @@ static int bpf_skb_net_grow(struct sk_buff *skb, u32 off, u32 len_diff,
 			return -ENOTSUPP;
 	}
 
-	ret = skb_cow_head(skb, len_diff);
+	ret = skb_cow_head(skb, meta_len + len_diff);
 	if (unlikely(ret < 0))
 		return ret;
 
@@ -3880,6 +3882,7 @@ static const struct bpf_func_proto sk_skb_change_tail_proto = {
 static inline int __bpf_skb_change_head(struct sk_buff *skb, u32 head_room,
 					u64 flags)
 {
+	const u8 meta_len = skb_metadata_len(skb);
 	u32 max_len = BPF_SKB_MAX_LEN;
 	u32 new_len = skb->len + head_room;
 	int ret;
@@ -3888,7 +3891,7 @@ static inline int __bpf_skb_change_head(struct sk_buff *skb, u32 head_room,
 		     new_len < skb->len))
 		return -EINVAL;
 
-	ret = skb_cow(skb, head_room);
+	ret = skb_cow(skb, meta_len + head_room);
 	if (likely(!ret)) {
 		/* Idea for this helper is that we currently only
 		 * allow to expand on mac header. This means that
@@ -3900,6 +3903,7 @@ static inline int __bpf_skb_change_head(struct sk_buff *skb, u32 head_room,
 		 * for redirection into L2 device.
 		 */
 		__skb_push(skb, head_room);
+		skb_postpush_data_move(skb, head_room, 0);
 		memset(skb->data, 0, head_room);
 		skb_reset_mac_header(skb);
 		skb_reset_mac_len(skb);

net/core/skbuff.c

@@ -2289,8 +2289,6 @@ int pskb_expand_head(struct sk_buff *skb, int nhead, int ntail,
 	skb->nohdr    = 0;
 	atomic_set(&skb_shinfo(skb)->dataref, 1);
 
-	skb_metadata_clear(skb);
-
 	/* It is not generally safe to change skb->truesize.
 	 * For the moment, we really care of rx path, or
 	 * when skb is orphaned (not attached to a socket).