AODV Routing Protocol Implementation + Simple Serial Interface Communicator + Tester

AODV Implementation

• RREQs, RREPs and UserData Packets
• Listener to receive Payloads
• Parsing, Sending and Generating Messages
• Decode / Encode with Base64
• Serial Communication
• Route Management
• CLI for User interactivity

Serial Communicator Features:

• SerialManager that handles the serial communication via jSerialComm
• Simple CLI Implementation to connect and send data to a serial port
• Configurable Port with Baudrate, Databits, Stopbits, Parity and Flowcontrol
• Show data string, predefined AT Commands or a few other commands like auto config
• Check Connection Status
• Custom Line Ending (CR, LF, CRLF)

Tester Features:

• Receives and parses data from a serial port
• Answers to predefined AT Commands
  • AT
  • AT+RX
  • AT+RSSI?
  • AT+ADDR?
  • AT+VER?
  • AT+SEND=XX
  • Sending a message
• Parses commands like AT+SEND=XX and reads the following XX bytes
• Sends a predefined response to the received data
• Error Handling

Tested with PuTTY and COM0COM

How to use:

• Create a virtual serial port pair with COM0COM
• Start the Application main class and connect to the first virtual serial port of the pair
• Start the ApplicationTester main class and connect to the other virtual serial port
• You can send data via the CLI and the tester will parse any incoming data
  • To send a message, start with AT+RX to activate the receiver mode
  • Then use AT+SEND=XX where XX is the length of the message you want to send
  • Then send the message. The Tester will parse the message and send a predefined response