Variables

1-js/02-first-steps/04-variables/1-hello-variables/solution.md

@@ -1,7 +1,7 @@
-In the code below, each line corresponds to the item in the task list.
+底下的程式碼中，每一行都代表著課題列表中的一項。
 
 ```js run
-let admin, name; // can declare two variables at once
+let admin, name; // 可以一次宣告兩個變數
 
 name = "John";
 

1-js/02-first-steps/04-variables/1-hello-variables/task.md

@@ -2,9 +2,9 @@ importance: 2
 
 ---
 
-# Working with variables
+# 使用變數
 
-1. Declare two variables: `admin` and `name`.
-2. Assign the value `"John"` to `name`.
-3. Copy the value from `name` to `admin`.
-4. Show the value of `admin` using `alert` (must output "John").
+1. 宣告兩個變數：`admin` 和 `name`。
+2. 將值 `"John"` 賦予 `name`。
+3. 從 `name` 中將值複製給 `admin`。
+4. 使用 `alert` 顯示 `admin` 的值 (一定會輸出 "John")。

1-js/02-first-steps/04-variables/2-declare-variables/solution.md

@@ -1,21 +1,22 @@
-## The variable for our planet
+## 代表我們星球的變數
 
-That's simple:
+這很簡單：
 
 ```js
 let ourPlanetName = "Earth";
 ```
 
-Note, we could use a shorter name `planet`, but it might be not obvious what planet it refers to. It's nice to be more verbose. At least until the variable isNotTooLong.
+注意我們也可用更短的名字 `planet`，但它可能不夠清楚說明代表是哪個星球。有著更多細節是好的，至少在變數 `沒變得太長` 之前。
 
-## The name of the current visitor
+## 現在使用者的名字
 
 ```js
 let currentUserName = "John";
 ```
 
-Again, we could shorten that to `userName` if we know for sure that the user is current.
+同樣地，若確定 user 就代表現在的使用者，我們也可用 `userName` 讓它變得更短。
 
-Modern editors and autocomplete make long variable names easy to write. Don't save on them. A name with 3 words in it is fine.
+現代化編輯器的自動完成功能讓寫長命名變數變得很簡單，不要忽略這功能，一個名字有三個字節是適當的。
+
+若你的編輯器沒有自動完成功能，快來選 [一個新的](/code-editors) 吧。
 
-And if your editor does not have proper autocompletion, get [a new one](/code-editors).

1-js/02-first-steps/04-variables/2-declare-variables/task.md

@@ -2,7 +2,8 @@ importance: 3
 
 ---
 
-# Giving the right name
+# 給予正確命名
+
+1. 建立一個變數並以我們星球命名，你會怎樣命名這個變數？
+2. 建立一個變數來存放現在網站造訪者的名字，你會怎樣命名這個變數？
 
-1. Create a variable with the name of our planet. How would you name such a variable?
-2. Create a variable to store the name of a current visitor to a website. How would you name that variable?

1-js/02-first-steps/04-variables/3-uppercast-constant/solution.md

@@ -1,5 +1,6 @@
-We generally use upper case for constants that are "hard-coded". Or, in other words, when the value is known prior to execution and directly written into the code.
+我們通常使用大寫來命名 "寫死的" 常數，或者換句話說，當常數的值在程式執行前就已知並寫在程式碼內時。
 
-In this code, `birthday` is exactly like that. So we could use the upper case for it.
+這份程式碼中的 `birthday` 是這樣，所以我們可以讓它使用大寫命名。
+
+相對地，`age` 在執行期間才被計算出來。今天我們有一個年齡，一年後就會有另一個。某種程度上它因為不會經由程式碼被改變所以是個常數，但相較於 `birthday` 卻 "沒那麼不變"，它是被計算出來的，故我們應該用小寫來命名。
 
-In contrast, `age` is evaluated in run-time. Today we have one age, a year after we'll have another one. It is constant in a sense that it does not change through the code execution. But it is a bit "less of a constant" than `birthday`: it is calculated, so we should keep the lower case for it.

1-js/02-first-steps/04-variables/3-uppercast-constant/task.md

@@ -2,23 +2,23 @@ importance: 4
 
 ---
 
-# Uppercase const?
+# 大寫常數？
 
-Examine the following code:
+檢查底下程式碼：
 
 ```js
 const birthday = '18.04.1982';
 
 const age = someCode(birthday);
 ```
 
-Here we have a constant `birthday` date and the `age` is calculated from `birthday` with the help of some code (it is not provided for shortness, and because details don't matter here).
+在這裡我們有個日期常數 `birthday`，和經由 `birthday` 與其他程式碼 (為了保持簡化這邊不提供，因為也不重要) 計算出的 `age` 常數。
 
-Would it be right to use upper case for `birthday`? For `age`? Or even for both?
+對於 `birthday` 使用大寫命名是正確的嗎？對於 `age` 呢？或者乾脆兩者都用？
 
 ```js
-const BIRTHDAY = '18.04.1982'; // make uppercase?
+const BIRTHDAY = '18.04.1982'; // 用大寫命名?
 
-const AGE = someCode(BIRTHDAY); // make uppercase?
+const AGE = someCode(BIRTHDAY); // 用大寫命名？
 ```