New starter flowchart

book/figures/fig-bulk-fermentation.tex

@@ -20,10 +20,10 @@
   % Same tricks not to get double lines and also we do _not_ want arrows
   \path [draw, thick] (ph_value) -- node{} ++(2, 0);
   \path [draw, thick] (smell) -| node{} ++(2, 4);
-  \path [line] (dough_ready) -- node{yes} (divide_preshape);
+  \path [line] (dough_ready) -- node{Yes} (divide_preshape);
   \path [line] (dough_ready) |- node[right=3pt]{no} (dough_flattened);
   \path [line] (dough_flattened) |- node[right=3pt]{yes} (stretch_fold);
-  \path [line] (dough_flattened) -- node{no} (wait_60_minutes);
+  \path [line] (dough_flattened) -- node{No} (wait_60_minutes);
   \path [line] (stretch_fold) -- (wait_60_minutes);
   \path [line] (wait_60_minutes) -- (check_dough);
 \end{tikzpicture}

book/figures/fig-compet.tex

@@ -0,0 +1,54 @@
+\begin{tikzpicture}[node distance=1cm]
+
+% Left Side: Antifungal metabolites
+% Bacteria
+\draw[thick, fill=gray!20] (-2, 2.5) ellipse (1.2cm and 0.5cm);
+\node at (-2, 3.2) {Antifungal metabolites};
+
+% Arrows for antifungal metabolites
+\foreach \x in {-2.5, -2, -1.5}
+  \draw[thick, ->] (\x, 2) -- (\x, 1.2);
+
+% Antifungal metabolites (triangles)
+\foreach \x in {-2.5, -2, -1.5}
+  \node[fill=red!80!black, regular polygon, regular polygon sides=3, draw, scale=0.7] at (\x, 1.2) {};
+
+% Fungi (left)
+\draw[thick, fill=gray!50] (-2, 0.5) circle (0.5cm);
+\node at (-2, -0.2) {Fungi};
+
+% Right Side: Nutrient Competition
+% Bacteria
+\draw[thick, fill=gray!20] (3, 2.5) ellipse (1.2cm and 0.5cm);
+\node at (3, 3.2) {Competition for nutrients};
+
+% Arrows for nutrients
+\foreach \x in {2.5, 3, 3.5}
+  \draw[thick, <-] (\x, 2) -- (\x, 1.2);
+
+% Available nutrients (triangles)
+\foreach \x in {2.5, 3, 3.5}
+  \node[fill=green!80!black, regular polygon, regular polygon sides=3, draw, scale=0.7, rotate=180] at (\x, 1.2) {};
+
+% Fungi (right)
+\draw[thick, fill=gray!50] (3, 0.5) circle (0.5cm);
+\node at (3, -0.2) {Fungi};
+
+% Legends
+% Bacteria legend
+\draw[thick, fill=gray!20] (-5.5, -2) ellipse (0.8cm and 0.3cm);
+\node[anchor=west] at (-5, -2) {Bacteria};
+
+% Fungi legend
+\draw[thick, fill=gray!50] (-5.5, -3) circle (0.3cm);
+\node[anchor=west] at (-5, -3) {Fungi};
+
+% Antifungal metabolites legend
+\node[fill=red!80!black, regular polygon, regular polygon sides=3, draw, scale=0.7] at (-5.5, -4) {};
+\node[anchor=west] at (-5, -4) {Antifungal metabolites};
+
+% Available nutrients legend
+\node[fill=green!80!black, regular polygon, regular polygon sides=3, draw, scale=0.7, rotate=180] at (-5.5, -5) {};
+\node[anchor=west] at (-5, -5) {Available nutrients};
+
+\end{tikzpicture}

book/figures/fig-dutch-oven-process.tex

@@ -22,11 +22,11 @@
   \path [line] (close) -- (back_oven);
   \path [line] (back_oven) -- (bake);
   \path [line] (bake.west) -- node{} ++(-2, 0) -| (is_ready_check.north);
-  \path [line] (is_ready_check) -- node{yes} (remove_do_lid);
-  \path [line] (is_ready_check) -- node{no} (wait_5_minutes);
+  \path [line] (is_ready_check) -- node{Yes} (remove_do_lid);
+  \path [line] (is_ready_check) -- node{No} (wait_5_minutes);
   \path [line] (wait_5_minutes.west) -- node{} ++(-1.5, 0) |- (is_ready_check.west);
   \path [line] (remove_do_lid) -- (dark_enough_decision);
-  \path [line] (dark_enough_decision) -- node{yes} (finish_baking);
-  \path [line] (dark_enough_decision) -- node{no} (bake_5_more_minutes);
+  \path [line] (dark_enough_decision) -- node{Yes} (finish_baking);
+  \path [line] (dark_enough_decision) -- node{No} (bake_5_more_minutes);
   \path [line] (bake_5_more_minutes.east) -- node{} ++(1, 0) -- node{} ++(0, 2.3) -| (dark_enough_decision.north);
 \end{tikzpicture}

book/figures/fig-kneading-process.tex

@@ -8,18 +8,18 @@
   \path [line] (knead) -- (wait2);
   \node [decision, below of=wait2, node distance=4cm] (windowpane_test) {Window-pane?};
   \path [line] (wait2) -- (windowpane_test);
-  \path [line] (windowpane_test.east) -- node{no} ++(1, 0) -- node{} ++(0, 5.7) -|  (knead.north);
+  \path [line] (windowpane_test.east) -- node{No} ++(1, 0) -- node{} ++(0, 5.7) -|  (knead.north);
   \node [decision] at (windowpane_test -| knead) (more_water) {Bassinage for more water?};
-  \path [line] (windowpane_test) -- node{yes} (more_water);
+  \path [line] (windowpane_test) -- node{Yes} (more_water);
   \node [block] at (wait1 |- more_water) (add_water) {Add water};
-  \path [line] (more_water) -- node{yes} (add_water);
+  \path [line] (more_water) -- node{Yes} (add_water);
   \path [line] (add_water.north east) -- (knead.south west);
   \node [decision, below of=more_water, node distance=4.5cm] (dough_sample) {Aliquot sample?};
-  \path [line] (more_water) -- node{no} (dough_sample);
+  \path [line] (more_water) -- node{No} (dough_sample);
   \node [block] at (dough_sample -| wait2) (dough_ball) {Make round dough ball};
-  \path [line] (dough_sample) -- node{no} (dough_ball);
+  \path [line] (dough_sample) -- node{No} (dough_ball);
   \node [block, below of=dough_sample] (extract_sample) {Extract sample};
-  \path [line] (dough_sample) -- node{yes} (extract_sample);
+  \path [line] (dough_sample) -- node{Yes} (extract_sample);
   \path [line] (extract_sample.north east) -- (dough_ball.south west);
   \node [success, below of=dough_ball] (begin_bulk) {Begin bulk fermentation};
   \path [line] (dough_ball) -- (begin_bulk);

book/figures/fig-liquid-starter-conversion.tex

@@ -8,7 +8,7 @@
   \path [line] (init) -- (feed_new_ratio);
   \path [line] (feed_new_ratio) -- node{Wait \qty{24}{\hour}} (ready_signs);
   \path [line] (feed_again) -- node[anchor=east]  {} ++(2.2,0) |- (feed_new_ratio);
-  \path [line] (ready_signs) -- node{no} (feed_again);
+  \path [line] (ready_signs) -- node{No} (feed_again);
   \path [line] (ready_signs) -- node[above=2pt]{~yes} (last_feed);
   \path [line] (last_feed) -- node{after \qtyrange{6}{12}{\hour}} (bread_dough);
   % TODO: find a better way to position the Repeat 3 times text and arrow. Hard-coded values are finicky and don't work well across media.

book/figures/fig-proofing-process.tex

@@ -7,14 +7,14 @@
   \node [success, right of=dent_visible_decision, node distance=4cm] (bake) {Score and bake};
   \node [block] at (retard_bake_decision |- poke) (wait_retard) {Wait\\ 15~minutes};
   \node [block] at (wait_retard |- bake) (retard) {Proof in fridge at \qty{4}{\degreeCelsius} (\qty{40}{\degF})};
-  \path [line] (init) -- node{yes} (poke);
-  \path [line] (init) -- node{no} (retard_bake_decision);
+  \path [line] (init) -- node{Yes} (poke);
+  \path [line] (init) -- node{No} (retard_bake_decision);
   \path [line] (poke) -- (dent_visible_decision);
-  \path [line] (dent_visible_decision) -- node{yes} (bake);
-  \path [line] (dent_visible_decision.west) -- node{no} ++(-1.4, 0) -- node{} (wait_poke.south);
+  \path [line] (dent_visible_decision) -- node{Yes} (bake);
+  \path [line] (dent_visible_decision.west) -- node{No} ++(-1.4, 0) -- node{} (wait_poke.south);
   \path [line] (wait_poke) -- (poke);
-  \path [line] (retard_bake_decision) -- node{yes} (wait_retard);
-  \path [line] (retard_bake_decision.east) -- node{no} ++(1, 0) |- node{} (retard.east);
+  \path [line] (retard_bake_decision) -- node{Yes} (wait_retard);
+  \path [line] (retard_bake_decision.east) -- node{No} ++(1, 0) |- node{} (retard.east);
   \path [line] (wait_retard) -- (retard);
   \path [line] (retard) -- (bake);
 \end{tikzpicture}

book/figures/fig-shaping-process.tex

@@ -8,8 +8,8 @@
   \node [block, right of=flour] (banneton) {Place upside down in banneton};
   \node [success, right of=banneton] (proof) {Begin proofing};
   \path [line] (init) -- (overfermented_decision);
-  \path [line] (overfermented_decision) -- node{yes} (overfermented);
-  \path [line] (overfermented_decision) -- node{no} (shaping_technique);
+  \path [line] (overfermented_decision) -- node{Yes} (overfermented);
+  \path [line] (overfermented_decision) -- node{No} (shaping_technique);
   \path [line] (shaping_technique) -- (flour);
   \path [line] (flour) -- (banneton);
   \path [line] (banneton) -- (proof);

book/figures/fig-starter-maintenance.tex

@@ -4,29 +4,29 @@
   \path [line] (init) -- (all_starter_used);
   \node [block, right of=init, node distance=3cm] (use_dough) {Take \qty{10}{\gram} of your bread dough};
   \node [block, right of=all_starter_used, node distance=3cm] (use_starter) {Take all but not more than \qty{10}{\gram} of your starter};
-  \path [line] (all_starter_used) -- node{yes} (use_dough);
-  \path [line] (all_starter_used) -- node{no} (use_starter);
+  \path [line] (all_starter_used) -- node{Yes} (use_dough);
+  \path [line] (all_starter_used) -- node{No} (use_starter);
   \node [block, right of=use_dough, node distance=3cm] (feed_starter) {Feed using 1:5:5 ratio};
   \path [line] (use_dough) -- (feed_starter);
   \path [line] (use_starter) -- (feed_starter);
   \node [decision, right of=feed_starter, node distance=3cm] (bake_next_day_check) {Bake next day?};
   \path [line] (feed_starter) -- (bake_next_day_check);
   \node [success, right of=bake_next_day_check, node distance=3.5cm]
       (make_bread_dough) {Make bread dough again after \qtyrange{8}{12}{\hour}};
-  \path [line] (bake_next_day_check) -- node{yes} (make_bread_dough);
+  \path [line] (bake_next_day_check) -- node{Yes} (make_bread_dough);
   \node [decision, right of=use_starter, node distance=3cm] (bake_next_week_check) {Baking in next 2 weeks?};
   \node [block, right of=bake_next_week_check, node distance=3.5cm] (store_fridge) {Store starter in fridge at  \qty{4}{\degreeCelsius} (\qty{40}{\degF})};
-  \path [line] (bake_next_week_check) -- node{yes} (store_fridge);
+  \path [line] (bake_next_week_check) -- node{Yes} (store_fridge);
   \node [success, right of=store_fridge, node distance=3cm] (feed_after_fridge) {Feed again using 1:5:5 ratio \qtyrange{8}{12}{\hour} before making dough};
   \path [line] (store_fridge) -- (feed_after_fridge);
-  \path [line] (bake_next_day_check) -- node{no} (bake_next_week_check);
+  \path [line] (bake_next_day_check) -- node{No} (bake_next_week_check);
   \node [decision, below of=use_starter, node distance=3cm] (freezer_check) {Have a freezer?};
   \path [line] (bake_next_week_check) -- (store_fridge);
-  \path [line] (bake_next_week_check) -- node{no} (freezer_check);
+  \path [line] (bake_next_week_check) -- node{No} (freezer_check);
   \node [block, right of=freezer_check, node distance=3cm] (dry_starter) {Dry your starter};
   \node [block, below of=dry_starter, node distance=3cm] (freeze_starter) {Freeze your starter};
-  \path [line] (freezer_check) -- node{no} (dry_starter);
-  \path [line] (freezer_check) -- node{yes} (freeze_starter);
+  \path [line] (freezer_check) -- node{No} (dry_starter);
+  \path [line] (freezer_check) -- node{Yes} (freeze_starter);
   \node [success, right of=dry_starter, node distance=3.5cm] (reactivate_freezer) {Reactivate starter for 3 days with daily 1:5:5 feedings};
   \path [line] (dry_starter) -- (reactivate_freezer);
   \path [line] (freeze_starter) -- (reactivate_freezer);

book/figures/fig-starter-readiness.tex

@@ -23,16 +23,16 @@
     {Prepare dough};
 
   \path [line] (init) -- (decision_start);
-  \path [line] (decision_start) -- node{no} (feed_no_branch);
+  \path [line] (decision_start) -- node{No} (feed_no_branch);
   \path [line] (decision_start) -- node[below=2pt]{yes} (feed_yes_branch.north west);
   \path [line] (feed_yes_branch) -- (low_ratio);
   \path [line] (feed_no_branch) -- (high_ratio);
   \path [line] (high_ratio) -- node[anchor=east, above=2pt] {} ++(2.2,0) |-(size_check);
   \path [line] (low_ratio) -- (size_check);
-  \path [line] (size_check) -- node{no} (feed_yes_branch.south east);
-  \path [line] (size_check) -- node{yes} (smell_check);
-  \path [line] (smell_check) -- node{no} (feed_yes_branch.south west);
-  \path [line] (smell_check) -- node{yes} (make_dough);
+  \path [line] (size_check) -- node{No} (feed_yes_branch.south east);
+  \path [line] (size_check) -- node{Yes} (smell_check);
+  \path [line] (smell_check) -- node{No} (feed_yes_branch.south west);
+  \path [line] (smell_check) -- node{Yes} (make_dough);
 
   % braces
   \draw[BC]   (size_check.south) -- 

book/figures/fig-stiff-starter-conversion.tex

@@ -11,14 +11,14 @@
   \path [line] (init) -- (feed_new_ratio);
   \path [line] (feed_again) -- (feed_new_ratio);
   \path [line] (next_day) -- (ready_signs);
-  \path [line] (ready_signs) -- node{no} (feed_again |- last_feed) -| (feed_again.south);
-  \path [line] (ready_signs) -- node{yes} (last_feed);
+  \path [line] (ready_signs) -- node{No} (feed_again |- last_feed) -| (feed_again.south);
+  \path [line] (ready_signs) -- node{Yes} (last_feed);
   \path [line] (last_feed) -- node{after \qtyrange{6}{12}{\hour}} (bread_dough);
   \path [line] (feed_new_ratio) -- (too_dry);
   \path [line] (add_water.north) -- node{} ++(0, 1.3) -| (too_dry.north);
-  \path [line] (too_dry) -- node{no} (next_day);
-  \path [line] (too_dry) -- node{yes} (add_water);
-  \path [line] (ready_signs) -- node{yes} (last_feed);
+  \path [line] (too_dry) -- node{No} (next_day);
+  \path [line] (too_dry) -- node{Yes} (add_water);
+  \path [line] (ready_signs) -- node{Yes} (last_feed);
   % TODO: find a better way to position the Repeat 3 times text and arrow. Hard-coded values are finicky and don't work well across media.
   \draw [line] ($ (feed_again.east) +(0.7cm, 0.9cm)$) arc (220:-45:1cm);
   \node [anchor=north, text width=5em] at ($(feed_again.east)+(1.9cm, 2cm)$) {Repeat 3~times};

book/figures/fig-wheat-sourdough-process.tex

@@ -13,8 +13,8 @@
   \path [line] (mix_ingredients) -- (dough_strength);
   \path [line] (dough_strength) -- (bulk);
   \path [line] (bulk) -- (divide_test);
-  \path [line] (divide_test) -- node{yes} (shape);
-  \path [line] (divide_test) -- node{no} (divide);
+  \path [line] (divide_test) -- node{Yes} (shape);
+  \path [line] (divide_test) -- node{No} (divide);
   \path [line] (divide) -- (preshape);
   \path [line] (preshape) -- (shape);
   \path [line] (shape) -- (proof);