Merge tag 'v4.19-rc7' into cx2072x_4.19

This is the 4.19-rc7 release

Documentation/devicetree/bindings/input/gpio-keys.txt

@@ -1,4 +1,4 @@
-Device-Tree bindings for input/gpio_keys.c keyboard driver
+Device-Tree bindings for input/keyboard/gpio_keys.c keyboard driver
 
 Required properties:
 	- compatible = "gpio-keys";

Documentation/devicetree/bindings/net/macb.txt

@@ -10,6 +10,7 @@ Required properties:
   Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
   the Cadence GEM, or the generic form: "cdns,gem".
   Use "atmel,sama5d2-gem" for the GEM IP (10/100) available on Atmel sama5d2 SoCs.
+  Use "atmel,sama5d3-macb" for the 10/100Mbit IP available on Atmel sama5d3 SoCs.
   Use "atmel,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs.
   Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs.
   Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.

Documentation/driver-api/fpga/fpga-mgr.rst

@@ -184,6 +184,11 @@ API for implementing a new FPGA Manager driver
 API for programming an FPGA
 ---------------------------
 
+FPGA Manager flags
+
+.. kernel-doc:: include/linux/fpga/fpga-mgr.h
+   :doc: FPGA Manager flags
+
 .. kernel-doc:: include/linux/fpga/fpga-mgr.h
    :functions: fpga_image_info
 

Documentation/fb/uvesafb.txt

@@ -15,7 +15,8 @@ than x86.  Check the v86d documentation for a list of currently supported
 arches.
 
 v86d source code can be downloaded from the following website:
-  http://dev.gentoo.org/~spock/projects/uvesafb
+
+  https://github.com/mjanusz/v86d
 
 Please refer to the v86d documentation for detailed configuration and
 installation instructions.
@@ -177,7 +178,7 @@ from the Video BIOS if you set pixclock to 0 in fb_var_screeninfo.
 
 --
  Michal Januszewski <[email protected]>
- Last updated: 2009-03-30
+ Last updated: 2017-10-10
 
  Documentation of the uvesafb options is loosely based on vesafb.txt.
 

Documentation/media/uapi/dvb/video_function_calls.rst

@@ -33,4 +33,3 @@ Video Function Calls
     video-clear-buffer
     video-set-streamtype
     video-set-format
-    video-set-attributes

Documentation/networking/ip-sysctl.txt

@@ -425,7 +425,7 @@ tcp_mtu_probing - INTEGER
 	  1 - Disabled by default, enabled when an ICMP black hole detected
 	  2 - Always enabled, use initial MSS of tcp_base_mss.
 
-tcp_probe_interval - INTEGER
+tcp_probe_interval - UNSIGNED INTEGER
 	Controls how often to start TCP Packetization-Layer Path MTU
 	Discovery reprobe. The default is reprobing every 10 minutes as
 	per RFC4821.

Documentation/virtual/kvm/api.txt

@@ -4510,7 +4510,8 @@ Do not enable KVM_FEATURE_PV_UNHALT if you disable HLT exits.
 Architectures: s390
 Parameters: none
 Returns: 0 on success, -EINVAL if hpage module parameter was not set
-	 or cmma is enabled
+	 or cmma is enabled, or the VM has the KVM_VM_S390_UCONTROL
+	 flag set
 
 With this capability the KVM support for memory backing with 1m pages
 through hugetlbfs can be enabled for a VM. After the capability is
@@ -4521,6 +4522,15 @@ hpage module parameter is not set to 1, -EINVAL is returned.
 While it is generally possible to create a huge page backed VM without
 this capability, the VM will not be able to run.
 
+7.14 KVM_CAP_MSR_PLATFORM_INFO
+
+Architectures: x86
+Parameters: args[0] whether feature should be enabled or not
+
+With this capability, a guest may read the MSR_PLATFORM_INFO MSR. Otherwise,
+a #GP would be raised when the guest tries to access. Currently, this
+capability does not enable write permissions of this MSR for the guest.
+
 8. Other capabilities.
 ----------------------
 

MAINTAINERS

@@ -324,7 +324,6 @@ F:	Documentation/ABI/testing/sysfs-bus-acpi
 F:	Documentation/ABI/testing/configfs-acpi
 F:	drivers/pci/*acpi*
 F:	drivers/pci/*/*acpi*
-F:	drivers/pci/*/*/*acpi*
 F:	tools/power/acpi/
 
 ACPI APEI
@@ -1251,7 +1250,7 @@ N:	meson
 
 ARM/Annapurna Labs ALPINE ARCHITECTURE
 M:	Tsahee Zidenberg <[email protected]>
-M:	Antoine Tenart <antoine.tenart@free-electrons.com>
+M:	Antoine Tenart <antoine.tenart@bootlin.com>
 L:	[email protected] (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-alpine/
@@ -2956,7 +2955,6 @@ F:	include/linux/bcm963xx_tag.h
 
 BROADCOM BNX2 GIGABIT ETHERNET DRIVER
 M:	Rasesh Mody <[email protected]>
-M:	Harish Patil <[email protected]>
 M:	[email protected]
 L:	[email protected]
 S:	Supported
@@ -2977,6 +2975,7 @@ F:	drivers/scsi/bnx2i/
 
 BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
 M:	Ariel Elior <[email protected]>
+M:	Sudarsana Kalluru <[email protected]>
 M:	[email protected]
 L:	[email protected]
 S:	Supported
@@ -5470,7 +5469,8 @@ S:	Odd Fixes
 F:	drivers/net/ethernet/agere/
 
 ETHERNET BRIDGE
-M:	Stephen Hemminger <[email protected]>
+M:	Roopa Prabhu <[email protected]>
+M:	Nikolay Aleksandrov <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
 L:	[email protected]
 W:	http://www.linuxfoundation.org/en/Net:Bridge
@@ -8598,7 +8598,6 @@ F:	include/linux/spinlock*.h
 F:	arch/*/include/asm/spinlock*.h
 F:	include/linux/rwlock*.h
 F:	include/linux/mutex*.h
-F:	arch/*/include/asm/mutex*.h
 F:	include/linux/rwsem*.h
 F:	arch/*/include/asm/rwsem.h
 F:	include/linux/seqlock.h
@@ -9716,13 +9715,6 @@ Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 S:	Maintained
 F:	drivers/media/dvb-frontends/mn88473*
 
-PCI DRIVER FOR MOBIVEIL PCIE IP
-M:	Subrahmanya Lingappa <[email protected]>
-L:	[email protected]
-S:	Supported
-F:	Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
-F:	drivers/pci/controller/pcie-mobiveil.c
-
 MODULE SUPPORT
 M:	Jessica Yu <[email protected]>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux.git modules-next
@@ -10949,7 +10941,7 @@ M:	Willy Tarreau <[email protected]>
 M:	Ksenija Stanojevic <[email protected]>
 S:	Odd Fixes
 F:	Documentation/auxdisplay/lcd-panel-cgram.txt
-F:	drivers/misc/panel.c
+F:	drivers/auxdisplay/panel.c
 
 PARALLEL PORT SUBSYSTEM
 M:	Sudip Mukherjee <[email protected]>
@@ -11137,6 +11129,13 @@ F:	include/uapi/linux/switchtec_ioctl.h
 F:	include/linux/switchtec.h
 F:	drivers/ntb/hw/mscc/
 
+PCI DRIVER FOR MOBIVEIL PCIE IP
+M:	Subrahmanya Lingappa <[email protected]>
+L:	[email protected]
+S:	Supported
+F:	Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
+F:	drivers/pci/controller/pcie-mobiveil.c
+
 PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support)
 M:	Thomas Petazzoni <[email protected]>
 M:	Jason Cooper <[email protected]>
@@ -11203,8 +11202,14 @@ F:	tools/pci/
 
 PCI ENHANCED ERROR HANDLING (EEH) FOR POWERPC
 M:	Russell Currey <[email protected]>
+M:	Sam Bobroff <[email protected]>
+M:	Oliver O'Halloran <[email protected]>
 L:	[email protected]
 S:	Supported
+F:	Documentation/PCI/pci-error-recovery.txt
+F:	drivers/pci/pcie/aer.c
+F:	drivers/pci/pcie/dpc.c
+F:	drivers/pci/pcie/err.c
 F:	Documentation/powerpc/eeh-pci-error-recovery.txt
 F:	arch/powerpc/kernel/eeh*.c
 F:	arch/powerpc/platforms/*/eeh*.c
@@ -11973,15 +11978,14 @@ F:	Documentation/scsi/LICENSE.qla4xxx
 F:	drivers/scsi/qla4xxx/
 
 QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
-M:	Harish Patil <harish.patil@cavium.com>
+M:	Shahed Shaikh <Shahed.Shaikh@cavium.com>
 M:	Manish Chopra <[email protected]>
 M:	[email protected]
 L:	[email protected]
 S:	Supported
 F:	drivers/net/ethernet/qlogic/qlcnic/
 
 QLOGIC QLGE 10Gb ETHERNET DRIVER
-M:	Harish Patil <[email protected]>
 M:	Manish Chopra <[email protected]>
 M:	[email protected]
 L:	[email protected]
@@ -12260,6 +12264,7 @@ F:	Documentation/networking/rds.txt
 
 RDT - RESOURCE ALLOCATION
 M:	Fenghua Yu <[email protected]>
+M:	Reinette Chatre <[email protected]>
 L:	[email protected]
 S:	Supported
 F:	arch/x86/kernel/cpu/intel_rdt*
@@ -13449,9 +13454,8 @@ F:	drivers/i2c/busses/i2c-synquacer.c
 F:	Documentation/devicetree/bindings/i2c/i2c-synquacer.txt
 
 SOCIONEXT UNIPHIER SOUND DRIVER
-M:	Katsuhiro Suzuki <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
-S:	Maintained
+S:	Orphan
 F:	sound/soc/uniphier/
 
 SOEKRIS NET48XX LED SUPPORT
@@ -15389,7 +15393,7 @@ S:	Maintained
 UVESAFB DRIVER
 M:	Michal Januszewski <[email protected]>
 L:	[email protected]
-W:	http://dev.gentoo.org/~spock/projects/uvesafb/
+W:	https://github.com/mjanusz/v86d
 S:	Maintained
 F:	Documentation/fb/uvesafb.txt
 F:	drivers/video/fbdev/uvesafb.*
@@ -15913,6 +15917,7 @@ F:	net/x25/
 X86 ARCHITECTURE (32-BIT AND 64-BIT)
 M:	Thomas Gleixner <[email protected]>
 M:	Ingo Molnar <[email protected]>
+M:	Borislav Petkov <[email protected]>
 R:	"H. Peter Anvin" <[email protected]>
 M:	[email protected]
 L:	[email protected]
@@ -15941,6 +15946,15 @@ M:	Borislav Petkov <[email protected]>
 S:	Maintained
 F:	arch/x86/kernel/cpu/microcode/*
 
+X86 MM
+M:	Dave Hansen <[email protected]>
+M:	Andy Lutomirski <[email protected]>
+M:	Peter Zijlstra <[email protected]>
+L:	[email protected]
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/mm
+S:	Maintained
+F:	arch/x86/mm/
+
 X86 PLATFORM DRIVERS
 M:	Darren Hart <[email protected]>
 M:	Andy Shevchenko <[email protected]>

Makefile

@@ -2,7 +2,7 @@
 VERSION = 4
 PATCHLEVEL = 19
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc7
 NAME = Merciless Moray
 
 # *DOCUMENTATION*
@@ -299,19 +299,7 @@ KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
 KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
 export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
 
-# SUBARCH tells the usermode build what the underlying arch is.  That is set
-# first, and if a usermode build is happening, the "ARCH=um" on the command
-# line overrides the setting of ARCH below.  If a native build is happening,
-# then ARCH is assigned, getting whatever value it gets normally, and
-# SUBARCH is subsequently ignored.
-
-SUBARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \
-				  -e s/sun4u/sparc64/ \
-				  -e s/arm.*/arm/ -e s/sa110/arm/ \
-				  -e s/s390x/s390/ -e s/parisc64/parisc/ \
-				  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
-				  -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ \
-				  -e s/riscv.*/riscv/)
+include scripts/subarch.include
 
 # Cross compiling and selecting different set of gcc/bin-utils
 # ---------------------------------------------------------------------------

arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts

@@ -11,6 +11,7 @@
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/at91.h>
 
 / {
 	model = "Atmel SAMA5D2 PTC EK";
@@ -299,6 +300,7 @@
 							 <PIN_PA30__NWE_NANDWE>,
 							 <PIN_PB2__NRD_NANDOE>;
 						bias-pull-up;
+						atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
 					};
 
 					ale_cle_rdy_cs {

arch/arm/boot/dts/bcm63138.dtsi

@@ -106,21 +106,23 @@
 		global_timer: timer@1e200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x1e200 0x20>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&axi_clk>;
 		};
 
 		local_timer: local-timer@1e600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x1e600 0x20>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
 			clocks = <&axi_clk>;
 		};
 
 		twd_watchdog: watchdog@1e620 {
 			compatible = "arm,cortex-a9-twd-wdt";
 			reg = <0x1e620 0x20>;
-			interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
 		armpll: armpll {
@@ -158,7 +160,7 @@
 		serial0: serial@600 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x600 0x1b>;
-			interrupts = <GIC_SPI 32 0>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&periph_clk>;
 			clock-names = "periph";
 			status = "disabled";
@@ -167,7 +169,7 @@
 		serial1: serial@620 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x620 0x1b>;
-			interrupts = <GIC_SPI 33 0>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&periph_clk>;
 			clock-names = "periph";
 			status = "disabled";
@@ -180,7 +182,7 @@
 			reg = <0x2000 0x600>, <0xf0 0x10>;
 			reg-names = "nand", "nand-int-base";
 			status = "disabled";
-			interrupts = <GIC_SPI 38 0>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "nand";
 		};
 

arch/arm/boot/dts/sama5d3_emac.dtsi

@@ -41,7 +41,7 @@
 			};
 
 			macb1: ethernet@f802c000 {
-				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				compatible = "atmel,sama5d3-macb", "cdns,at91sam9260-macb", "cdns,macb";
 				reg = <0xf802c000 0x100>;
 				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";

arch/arm/boot/dts/stm32mp157c.dtsi

@@ -1078,8 +1078,8 @@
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc SPI6_K>;
 			resets = <&rcc SPI6_R>;
-			dmas = <&mdma1 34 0x0 0x40008 0x0 0x0 0>,
-			       <&mdma1 35 0x0 0x40002 0x0 0x0 0>;
+			dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>,
+			       <&mdma1 35 0x0 0x40002 0x0 0x0>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};

arch/arm/boot/dts/sun8i-r40.dtsi

@@ -800,8 +800,7 @@
 		};
 
 		hdmi_phy: hdmi-phy@1ef0000 {
-			compatible = "allwinner,sun8i-r40-hdmi-phy",
-				     "allwinner,sun50i-a64-hdmi-phy";
+			compatible = "allwinner,sun8i-r40-hdmi-phy";
 			reg = <0x01ef0000 0x10000>;
 			clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
 				 <&ccu 7>, <&ccu 16>;

arch/arm/mm/ioremap.c

@@ -473,7 +473,7 @@ void pci_ioremap_set_mem_type(int mem_type)
 
 int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr)
 {
-	BUG_ON(offset + SZ_64K > IO_SPACE_LIMIT);
+	BUG_ON(offset + SZ_64K - 1 > IO_SPACE_LIMIT);
 
 	return ioremap_page_range(PCI_IO_VIRT_BASE + offset,
 				  PCI_IO_VIRT_BASE + offset + SZ_64K,