Odroid-N2: arm64/dts: fix audio model name

.gitignore

@@ -17,6 +17,7 @@
 *.c.[012]*.*
 *.dt.yaml
 *.dtb
+*.dtbo
 *.dtb.S
 *.dwo
 *.elf

Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml

@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/samsung/exynos-chipid.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC series Chipid driver
+
+maintainers:
+  - Krzysztof Kozlowski <[email protected]>
+
+# Custom select to avoid matching all nodes with 'syscon'
+select:
+  properties:
+    compatible:
+      contains:
+        const: samsung,exynos4210-chipid
+  required:
+    - compatible
+
+properties:
+  compatible:
+    allOf:
+      - items:
+        - const: samsung,exynos4210-chipid
+        - const: syscon
+
+  reg:
+    maxItems: 1
+
+  samsung,asv-bin:
+    description:
+      Adaptive Supply Voltage bin selection. This can be used
+      to determine the ASV bin of an SoC if respective information
+      is missing in the CHIPID registers or in the OTP memory.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [ 0, 1, 2, 3 ]
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    chipid@10000000 {
+      compatible = "samsung,exynos4210-chipid", "syscon";
+      reg = <0x10000000 0x100>;
+      samsung,asv-bin = <2>;
+    };

Documentation/devicetree/bindings/lpddr2/lpddr2.txt → Documentation/devicetree/bindings/ddr/lpddr2.txt

@@ -36,7 +36,7 @@ Child nodes:
   "lpddr2-timings" provides AC timing parameters of the device for
   a given speed-bin. The user may provide the timings for as many
   speed-bins as is required. Please see Documentation/devicetree/
-  bindings/lpddr2/lpddr2-timings.txt for more information on "lpddr2-timings"
+  bindings/ddr/lpddr2-timings.txt for more information on "lpddr2-timings"
 
 Example:
 

Documentation/devicetree/bindings/ddr/lpddr3-timings.txt

@@ -0,0 +1,58 @@
+* AC timing parameters of LPDDR3 memories for a given speed-bin.
+
+The structures are based on LPDDR2 and extended where needed.
+
+Required properties:
+- compatible : Should be "jedec,lpddr3-timings"
+- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
+- reg : maximum DDR clock frequency for the speed-bin. Type is <u32>
+
+Optional properties:
+
+The following properties represent AC timing parameters from the memory
+data-sheet of the device for a given speed-bin. All these properties are
+of type <u32> and the default unit is ps (pico seconds).
+- tRFC
+- tRRD
+- tRPab
+- tRPpb
+- tRCD
+- tRC
+- tRAS
+- tWTR
+- tWR
+- tRTP
+- tW2W-C2C
+- tR2R-C2C
+- tFAW
+- tXSR
+- tXP
+- tCKE
+- tCKESR
+- tMRD
+
+Example:
+
+timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
+	compatible	= "jedec,lpddr3-timings";
+	reg		= <800000000>; /* workaround: it shows max-freq */
+	min-freq	= <100000000>;
+	tRFC		= <65000>;
+	tRRD		= <6000>;
+	tRPab		= <12000>;
+	tRPpb		= <12000>;
+	tRCD		= <10000>;
+	tRC		= <33750>;
+	tRAS		= <23000>;
+	tWTR		= <3750>;
+	tWR		= <7500>;
+	tRTP		= <3750>;
+	tW2W-C2C	= <0>;
+	tR2R-C2C	= <0>;
+	tFAW		= <25000>;
+	tXSR		= <70000>;
+	tXP		= <3750>;
+	tCKE		= <3750>;
+	tCKESR		= <3750>;
+	tMRD		= <7000>;
+};

Documentation/devicetree/bindings/ddr/lpddr3.txt

@@ -0,0 +1,101 @@
+* LPDDR3 SDRAM memories compliant to JEDEC JESD209-3C
+
+Required properties:
+- compatible : Should be "<vendor>,<type>", and generic value "jedec,lpddr3".
+  Example "<vendor>,<type>" values:
+    "samsung,K3QF2F20DB"
+
+- density  : <u32> representing density in Mb (Mega bits)
+- io-width : <u32> representing bus width. Possible values are 8, 16, 32, 64
+- #address-cells: Must be set to 1
+- #size-cells: Must be set to 0
+
+Optional properties:
+
+The following optional properties represent the minimum value of some AC
+timing parameters of the DDR device in terms of number of clock cycles.
+These values shall be obtained from the device data-sheet.
+- tRFC-min-tck
+- tRRD-min-tck
+- tRPab-min-tck
+- tRPpb-min-tck
+- tRCD-min-tck
+- tRC-min-tck
+- tRAS-min-tck
+- tWTR-min-tck
+- tWR-min-tck
+- tRTP-min-tck
+- tW2W-C2C-min-tck
+- tR2R-C2C-min-tck
+- tWL-min-tck
+- tDQSCK-min-tck
+- tRL-min-tck
+- tFAW-min-tck
+- tXSR-min-tck
+- tXP-min-tck
+- tCKE-min-tck
+- tCKESR-min-tck
+- tMRD-min-tck
+
+Child nodes:
+- The lpddr3 node may have one or more child nodes of type "lpddr3-timings".
+  "lpddr3-timings" provides AC timing parameters of the device for
+  a given speed-bin. Please see Documentation/devicetree/
+  bindings/ddr/lpddr3-timings.txt for more information on "lpddr3-timings"
+
+Example:
+
+samsung_K3QF2F20DB: lpddr3 {
+	compatible	= "samsung,K3QF2F20DB", "jedec,lpddr3";
+	density		= <16384>;
+	io-width	= <32>;
+	#address-cells	= <1>;
+	#size-cells	= <0>;
+
+	tRFC-min-tck		= <17>;
+	tRRD-min-tck		= <2>;
+	tRPab-min-tck		= <2>;
+	tRPpb-min-tck		= <2>;
+	tRCD-min-tck		= <3>;
+	tRC-min-tck		= <6>;
+	tRAS-min-tck		= <5>;
+	tWTR-min-tck		= <2>;
+	tWR-min-tck		= <7>;
+	tRTP-min-tck		= <2>;
+	tW2W-C2C-min-tck	= <0>;
+	tR2R-C2C-min-tck	= <0>;
+	tWL-min-tck		= <8>;
+	tDQSCK-min-tck		= <5>;
+	tRL-min-tck		= <14>;
+	tFAW-min-tck		= <5>;
+	tXSR-min-tck		= <12>;
+	tXP-min-tck		= <2>;
+	tCKE-min-tck		= <2>;
+	tCKESR-min-tck		= <2>;
+	tMRD-min-tck		= <5>;
+
+	timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
+		compatible	= "jedec,lpddr3-timings";
+		/* workaround: 'reg' shows max-freq */
+		reg		= <800000000>;
+		min-freq	= <100000000>;
+		tRFC		= <65000>;
+		tRRD		= <6000>;
+		tRPab		= <12000>;
+		tRPpb		= <12000>;
+		tRCD		= <10000>;
+		tRC		= <33750>;
+		tRAS		= <23000>;
+		tWTR		= <3750>;
+		tWR		= <7500>;
+		tRTP		= <3750>;
+		tW2W-C2C	= <0>;
+		tR2R-C2C	= <0>;
+		tFAW		= <25000>;
+		tXSR		= <70000>;
+		tXP		= <3750>;
+		tCKE		= <3750>;
+		tCKESR		= <3750>;
+		tMRD		= <7000>;
+	};
+}

Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt

@@ -0,0 +1,84 @@
+* Exynos5422 frequency and voltage scaling for Dynamic Memory Controller device
+
+The Samsung Exynos5422 SoC has DMC (Dynamic Memory Controller) to which the DRAM
+memory chips are connected. The driver is to monitor the controller in runtime
+and switch frequency and voltage. To monitor the usage of the controller in
+runtime, the driver uses the PPMU (Platform Performance Monitoring Unit), which
+is able to measure the current load of the memory.
+When 'userspace' governor is used for the driver, an application is able to
+switch the DMC and memory frequency.
+
+Required properties for DMC device for Exynos5422:
+- compatible: Should be "samsung,exynos5422-dmc".
+- clocks : list of clock specifiers, must contain an entry for each
+  required entry in clock-names for CLK_FOUT_SPLL, CLK_MOUT_SCLK_SPLL,
+  CLK_FF_DOUT_SPLL2, CLK_FOUT_BPLL, CLK_MOUT_BPLL, CLK_SCLK_BPLL,
+  CLK_MOUT_MX_MSPLL_CCORE, CLK_MOUT_MX_MSPLL_CCORE_PHY, CLK_MOUT_MCLK_CDREX,
+- clock-names : should include "fout_spll", "mout_sclk_spll", "ff_dout_spll2",
+  "fout_bpll", "mout_bpll", "sclk_bpll", "mout_mx_mspll_ccore",
+  "mout_mclk_cdrex"  entries
+- devfreq-events : phandles for PPMU devices connected to this DMC.
+- vdd-supply : phandle for voltage regulator which is connected.
+- reg : registers of two CDREX controllers.
+- operating-points-v2 : phandle for OPPs described in v2 definition.
+- device-handle : phandle of the connected DRAM memory device. For more
+	information please refer to documentation file:
+	Documentation/devicetree/bindings/ddr/lpddr3.txt
+- devfreq-events : phandles of the PPMU events used by the controller.
+- samsung,syscon-clk : phandle of the clock register set used by the controller,
+	these registers are used for enabling a 'pause' feature and are not
+	exposed by clock framework but they must be used in a safe way.
+	The register offsets are in the driver code and specyfic for this SoC
+	type.
+
+Optional properties for DMC device for Exynos5422:
+- interrupt-parent : The parent interrupt controller.
+- interrupts : Contains the IRQ line numbers for the DMC internal performance
+  event counters in DREX0 and DREX1 channels. Align with specification of the
+  interrupt line(s) in the interrupt-parent controller.
+- interrupt-names : IRQ names "drex_0" and "drex_1", the order should be the
+  same as in the 'interrupts' list above.
+
+Example:
+
+	ppmu_dmc0_0: ppmu@10d00000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x10d00000 0x2000>;
+		clocks = <&clock CLK_PCLK_PPMU_DREX0_0>;
+		clock-names = "ppmu";
+		events {
+			ppmu_event_dmc0_0: ppmu-event3-dmc0_0 {
+				event-name = "ppmu-event3-dmc0_0";
+			};
+		};
+	};
+
+	dmc: memory-controller@10c20000 {
+		compatible = "samsung,exynos5422-dmc";
+		reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>;
+		clocks = <&clock CLK_FOUT_SPLL>,
+			 <&clock CLK_MOUT_SCLK_SPLL>,
+			 <&clock CLK_FF_DOUT_SPLL2>,
+			 <&clock CLK_FOUT_BPLL>,
+			 <&clock CLK_MOUT_BPLL>,
+			 <&clock CLK_SCLK_BPLL>,
+			 <&clock CLK_MOUT_MX_MSPLL_CCORE>,
+			 <&clock CLK_MOUT_MCLK_CDREX>;
+		clock-names = "fout_spll",
+			      "mout_sclk_spll",
+			      "ff_dout_spll2",
+			      "fout_bpll",
+			      "mout_bpll",
+			      "sclk_bpll",
+			      "mout_mx_mspll_ccore",
+			      "mout_mclk_cdrex";
+		operating-points-v2 = <&dmc_opp_table>;
+		devfreq-events = <&ppmu_event3_dmc0_0>,	<&ppmu_event3_dmc0_1>,
+				 <&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>;
+		device-handle = <&samsung_K3QF2F20DB>;
+		vdd-supply = <&buck1_reg>;
+		samsung,syscon-clk = <&clock>;
+		interrupt-parent = <&combiner>;
+		interrupts = <16 0>, <16 1>;
+		interrupt-names = "drex_0", "drex_1";
+	};

Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml

@@ -22,6 +22,7 @@ properties:
     enum:
       - amlogic,meson-gx-spicc # SPICC controller on Amlogic GX and compatible SoCs
       - amlogic,meson-axg-spicc # SPICC controller on Amlogic AXG and compatible SoCs
+      - amlogic,meson-g12a-spicc # SPICC controller on Amlogic G12A and compatible SoCs
 
   interrupts:
     maxItems: 1
@@ -40,6 +41,27 @@ properties:
     items:
       - const: core
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - amlogic,meson-g12a-spicc
+
+then:
+  properties:
+    clocks:
+      contains:
+        items:
+          - description: controller register bus clock
+          - description: baud rate generator and delay control clock
+
+    clock-names:
+      minItems: 2
+      items:
+        - const: core
+        - const: pclk
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/usb/dwc3.txt

@@ -75,6 +75,8 @@ Optional properties:
 			from P0 to P1/P2/P3 without delay.
  - snps,dis-tx-ipgap-linecheck-quirk: when set, disable u2mac linestate check
 			during HS transmit.
+ - snps,parkmode-disable-ss-quirk: when set, all SuperSpeed bus instances in
+			park mode are disabled.
  - snps,dis_metastability_quirk: when set, disable metastability workaround.
 			CAUTION: use only if you are absolutely sure of it.
  - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal

MAINTAINERS

@@ -4965,6 +4965,14 @@ F:	include/linux/dma-direct.h
 F:	include/linux/dma-mapping.h
 F:	include/linux/dma-noncoherent.h
 
+DMC FREQUENCY DRIVER FOR SAMSUNG EXYNOS5422
+M:	Lukasz Luba <[email protected]>
+L:	[email protected]
+L:	[email protected]
+S:	Maintained
+F:	drivers/memory/samsung/exynos5422-dmc.c
+F:	Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt
+
 DME1737 HARDWARE MONITOR DRIVER
 M:	Juerg Haefliger <[email protected]>
 L:	[email protected]

Makefile

@@ -1237,6 +1237,9 @@ ifneq ($(dtstree),)
 %.dtb: include/config/kernel.release scripts_dtc
 	$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
 
+%.dtbo:
+	$(Q)$(MAKE) $(build)=$(dtstree)/overlays $(dtstree)/overlays/$@
+
 PHONY += dtbs dtbs_install dtbs_check
 dtbs dtbs_check: include/config/kernel.release scripts_dtc
 	$(Q)$(MAKE) $(build)=$(dtstree)