Skip to content

chore(deps): bump github.com/filecoin-project/lotus from 1.32.1 to 1.32.2 #2006

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Conversation

dependabot[bot]
Copy link
Contributor

@dependabot dependabot bot commented on behalf of github Apr 7, 2025

Bumps github.com/filecoin-project/lotus from 1.32.1 to 1.32.2.

Release notes

Sourced from github.com/filecoin-project/lotus's releases.

miner/v1.32.2

This Lotus v1.32.2 release is a MANDATORY patch release. After the Calibration network upgraded to nv25, a bug was discovered in the ref-fvm KAMT library affecting ERC-20 token minting operations. You can read the the full techincal breakdown of the issue here.

This patch release includes the following updates:

  • Schedules a mandatory Calibration upgrade, happening on 2025-04-07T23:00:00Z, to fix the ERC-20 token minting bug on the Calibration network.
  • Postpones the mandatory Mainnet nv25 upgrade by 4 days, to 2025-04-14T23:00:00Z

☢️ Upgrade Warnings ☢️

  • All Lotus node and Storage Provider (SP) operators must upgrade to this patch release before the specified dates for the Calibration and Mainnet networks.
  • Please check the upgrade warning section for the v1.32.1 release for more upgrade warnings if you are upgrading from a version prior to v1.32.0.

🏛️ Filecoin network version 25 FIPs

📦 v16 Builtin Actor Bundle

This release candidate uses the v16.0.1

🚚 Migration

All node operators, including storage providers, should be aware that ONE pre-migration is being scheduled 120 epochs before the network upgrade. The migration for the NV25 upgrade is expected to be medium with a bit longer pre-migration compared to the two previous network upgrade.

Pre-Migration is expected to take between 4 to 8 minutes on a SplitStore node. The migration on the upgrade epoch is expected to take 30 seconds on a node with a NVMe-drive and a newer CPU. For nodes running on slower disks/CPU, it is still expected to take around 1 minute. We recommend node operators (who haven't enabled splitstore discard mode) that do not care about historical chain states, to prune the chain blockstore by syncing from a snapshot 1-2 days before the upgrade.

For certain node operators, such as full archival nodes or systems that need to keep large amounts of state (RPC providers), we recommend skipping the pre-migration and run the non-cached migration (i.e., just running the migration at the network upgrade epoch), and schedule for some additional downtime. Operators of such nodes can read the How to disable premigration in network upgrade tutorial.

Bug Fixes and Chores

📝 Changelog

For the set of changes since the last stable release:

v1.32.2

This Lotus v1.32.2 release is a MANDATORY patch release. After the Calibration network upgraded to nv25, a bug was discovered in the ref-fvm KAMT library affecting ERC-20 token minting operations. You can read the the full techincal breakdown of the issue here.

This patch release includes the following updates:

  • Schedules a mandatory Calibration upgrade, happening on 2025-04-07T23:00:00Z, to fix the ERC-20 token minting bug on the Calibration network.
  • Postpones the mandatory Mainnet nv25 upgrade by 4 days, to 2025-04-14T23:00:00Z

☢️ Upgrade Warnings ☢️

... (truncated)

Changelog

Sourced from github.com/filecoin-project/lotus's changelog.

Node and Miner v1.32.2 / 2025-04-04

This Lotus v1.32.2 release is a MANDATORY patch release. After the Calibration network upgraded to nv25, a bug was discovered in the ref-fvm KAMT library affecting ERC-20 token minting operations. You can read the the full techincal breakdown of the issue here.

This patch release includes the following updates:

  • Schedules a mandatory Calibration upgrade, happening on 2025-04-07T23:00:00Z, to fix the ERC-20 token minting bug on the Calibration network.
  • Postpones the mandatory Mainnet nv25 upgrade by 4 days, to 2025-04-14T23:00:00Z

☢️ Upgrade Warnings ☢️

  • All Lotus node and Storage Provider (SP) operators must upgrade to this patch release before the specified dates for the Calibration and Mainnet networks.
  • Please check the upgrade warning section for the v1.32.1 release for more upgrade warnings if you are upgrading from a version prior to v1.32.0.

🏛️ Filecoin network version 25 FIPs

📦 v16 Builtin Actor Bundle

This release candidate uses the v16.0.1

🚚 Migration

All node operators, including storage providers, should be aware that ONE pre-migration is being scheduled 120 epochs before the network upgrade. The migration for the NV25 upgrade is expected to be medium with a bit longer pre-migration compared to the two previous network upgrade.

Pre-Migration is expected to take between 4 to 8 minutes on a SplitStore node. The migration on the upgrade epoch is expected to take 30 seconds on a node with a NVMe-drive and a newer CPU. For nodes running on slower disks/CPU, it is still expected to take around 1 minute. We recommend node operators (who haven't enabled splitstore discard mode) that do not care about historical chain states, to prune the chain blockstore by syncing from a snapshot 1-2 days before the upgrade.

For certain node operators, such as full archival nodes or systems that need to keep large amounts of state (RPC providers), we recommend skipping the pre-migration and run the non-cached migration (i.e., just running the migration at the network upgrade epoch), and schedule for some additional downtime. Operators of such nodes can read the How to disable premigration in network upgrade tutorial.

Bug Fixes and Chores

📝 Changelog

For the set of changes since the last stable release:

Commits

Dependabot compatibility score

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.


Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

  • @dependabot rebase will rebase this PR
  • @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
  • @dependabot merge will merge this PR after your CI passes on it
  • @dependabot squash and merge will squash and merge this PR after your CI passes on it
  • @dependabot cancel merge will cancel a previously requested merge and block automerging
  • @dependabot reopen will reopen this PR if it is closed
  • @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
  • @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
  • @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
  • @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
  • @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

Bumps [github.com/filecoin-project/lotus](https://github.com/filecoin-project/lotus) from 1.32.1 to 1.32.2.
- [Release notes](https://github.com/filecoin-project/lotus/releases)
- [Changelog](https://github.com/filecoin-project/lotus/blob/v1.32.2/CHANGELOG.md)
- [Commits](filecoin-project/lotus@v1.32.1...v1.32.2)

---
updated-dependencies:
- dependency-name: github.com/filecoin-project/lotus
  dependency-version: 1.32.2
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <[email protected]>
@dependabot dependabot bot added dependencies Pull requests that update a dependency file go Pull requests that update Go code labels Apr 7, 2025
Copy link
Contributor Author

dependabot bot commented on behalf of github Apr 10, 2025

Looks like github.com/filecoin-project/lotus is up-to-date now, so this is no longer needed.

@dependabot dependabot bot closed this Apr 10, 2025
@dependabot dependabot bot deleted the dependabot/go_modules/github.com/filecoin-project/lotus-1.32.2 branch April 10, 2025 08:26
@github-project-automation github-project-automation bot moved this to Done in Boost Apr 10, 2025
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
dependencies Pull requests that update a dependency file go Pull requests that update Go code
Projects
Status: Done
Development

Successfully merging this pull request may close these issues.

0 participants