Run

1. software overview

Three dialogs appear after starting DQuickLTFit:

• scope [see section 1.2]
• plot [see section 1.3]
• results [see section 1.4]

Fig. 1: software overview

1.2. the scope dialog

The scope dialog represents the main user interface where all configurations for preparing and running the fit are made.

1.2.1 open, save or create a project

> **Fig. 3:** open, save or create a new project

1.2.2 lifetime data import

> **Fig. 4:** import the lifetime data to your project

> **Fig. 5:** Select and import the lifetime data. Additionally, a binning factor can be chosen.

1.2.3 configure the display

> **Fig. 6:** Choose the content which should be visible in your project.

1.2.4 export the fit results

> **Fig. 7:** Export the currently selected fit results as pdf or html file or save the plot as image.

1.2.5 the calculator

> **Fig. 8:** Open the low weight calculator.

> **Fig. 9:** embedded low weight calculator

> **Fig. 10:** This calculator provides a set of nature constants and functions. Furthermore, custom constants can be defined and used for the calculation.

1.2.6 fit configuration and fitting

Fig. 2: scope dialog

Fig. 2: scope dialog

1.3. the plot dialog

Fig. 2: plot dialog

Fig. 2: blabla...

1.4. the result dialog

Fig. 2: results dialog

Fig. 2: results dialog

Fig. 2: results dialog