Ciqcbr7 9 pr #2

bmastbergen · 2025-04-24T17:20:19Z

No description provided.

jira LE-1907 Rebuild_History Non-Buildable kernel-5.14.0-284.30.1.el9_2 commit-author minoura makoto <[email protected]> commit b18cba0 Commit 9130b8d ("SUNRPC: allow for upcalls for the same uid but different gss service") introduced `auth` argument to __gss_find_upcall(), but in gss_pipe_downcall() it was left as NULL since it (and auth->service) was not (yet) determined. When multiple upcalls with the same uid and different service are ongoing, it could happen that __gss_find_upcall(), which returns the first match found in the pipe->in_downcall list, could not find the correct gss_msg corresponding to the downcall we are looking for. Moreover, it might return a msg which is not sent to rpc.gssd yet. We could see mount.nfs process hung in D state with multiple mount.nfs are executed in parallel. The call trace below is of CentOS 7.9 kernel-3.10.0-1160.24.1.el7.x86_64 but we observed the same hang w/ elrepo kernel-ml-6.0.7-1.el7. PID: 71258 TASK: ffff91ebd4be0000 CPU: 36 COMMAND: "mount.nfs" #0 [ffff9203ca3234f8] __schedule at ffffffffa3b8899f #1 [ffff9203ca323580] schedule at ffffffffa3b88eb9 #2 [ffff9203ca323590] gss_cred_init at ffffffffc0355818 [auth_rpcgss] #3 [ffff9203ca323658] rpcauth_lookup_credcache at ffffffffc0421ebc [sunrpc] ctrliq#4 [ffff9203ca3236d8] gss_lookup_cred at ffffffffc0353633 [auth_rpcgss] ctrliq#5 [ffff9203ca3236e8] rpcauth_lookupcred at ffffffffc0421581 [sunrpc] ctrliq#6 [ffff9203ca323740] rpcauth_refreshcred at ffffffffc04223d3 [sunrpc] ctrliq#7 [ffff9203ca3237a0] call_refresh at ffffffffc04103dc [sunrpc] ctrliq#8 [ffff9203ca3237b8] __rpc_execute at ffffffffc041e1c9 [sunrpc] ctrliq#9 [ffff9203ca323820] rpc_execute at ffffffffc0420a48 [sunrpc] The scenario is like this. Let's say there are two upcalls for services A and B, A -> B in pipe->in_downcall, B -> A in pipe->pipe. When rpc.gssd reads pipe to get the upcall msg corresponding to service B from pipe->pipe and then writes the response, in gss_pipe_downcall the msg corresponding to service A will be picked because only uid is used to find the msg and it is before the one for B in pipe->in_downcall. And the process waiting for the msg corresponding to service A will be woken up. Actual scheduing of that process might be after rpc.gssd processes the next msg. In rpc_pipe_generic_upcall it clears msg->errno (for A). The process is scheduled to see gss_msg->ctx == NULL and gss_msg->msg.errno == 0, therefore it cannot break the loop in gss_create_upcall and is never woken up after that. This patch adds a simple check to ensure that a msg which is not sent to rpc.gssd yet is not chosen as the matching upcall upon receiving a downcall. Signed-off-by: minoura makoto <[email protected]> Signed-off-by: Hiroshi Shimamoto <[email protected]> Tested-by: Hiroshi Shimamoto <[email protected]> Cc: Trond Myklebust <[email protected]> Fixes: 9130b8d ("SUNRPC: allow for upcalls for same uid but different gss service") Signed-off-by: Trond Myklebust <[email protected]> (cherry picked from commit b18cba0) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 Rebuild_History Non-Buildable kernel-5.14.0-284.30.1.el9_2 commit-author David Howells <[email protected]> commit ad25f5c There's a locking issue with the per-netns list of calls in rxrpc. The pieces of code that add and remove a call from the list use write_lock() and the calls procfile uses read_lock() to access it. However, the timer callback function may trigger a removal by trying to queue a call for processing and finding that it's already queued - at which point it has a spare refcount that it has to do something with. Unfortunately, if it puts the call and this reduces the refcount to 0, the call will be removed from the list. Unfortunately, since the _bh variants of the locking functions aren't used, this can deadlock. ================================ WARNING: inconsistent lock state 5.18.0-rc3-build4+ ctrliq#10 Not tainted -------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. ksoftirqd/2/25 [HC0[0]:SC1[1]:HE1:SE0] takes: ffff888107ac4038 (&rxnet->call_lock){+.?.}-{2:2}, at: rxrpc_put_call+0x103/0x14b {SOFTIRQ-ON-W} state was registered at: ... Possible unsafe locking scenario: CPU0 ---- lock(&rxnet->call_lock); <Interrupt> lock(&rxnet->call_lock); *** DEADLOCK *** 1 lock held by ksoftirqd/2/25: #0: ffff8881008ffdb0 ((&call->timer)){+.-.}-{0:0}, at: call_timer_fn+0x5/0x23d Changes ======= ver #2) - Changed to using list_next_rcu() rather than rcu_dereference() directly. Fixes: 17926a7 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells <[email protected]> cc: Marc Dionne <[email protected]> cc: [email protected] Signed-off-by: David S. Miller <[email protected]> (cherry picked from commit ad25f5c) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 Rebuild_History Non-Buildable kernel-5.14.0-284.30.1.el9_2 commit-author David Howells <[email protected]> commit 75bfdbf Implement an in-kernel rxperf server to allow kernel-based rxrpc services to be tested directly, unlike with AFS where they're accessed by the fileserver when the latter decides it wants to. This is implemented as a module that, if loaded, opens UDP port 7009 (afs3-rmtsys) and listens on it for incoming calls. Calls can be generated using the rxperf command shipped with OpenAFS, for example. Changes ======= ver #2) - Use min_t() instead of min(). Signed-off-by: David Howells <[email protected]> cc: Marc Dionne <[email protected]> cc: [email protected] cc: Jakub Kicinski <[email protected]> (cherry picked from commit 75bfdbf) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 Rebuild_History Non-Buildable kernel-5.14.0-284.30.1.el9_2 commit-author David Howells <[email protected]> commit 5e6ef4f Empty-Commit: Cherry-Pick Conflicts during history rebuild. Will be included in final tarball splat. Ref for failed cherry-pick at: ciq/ciq_backports/kernel-5.14.0-284.30.1.el9_2/5e6ef4f1.failed Move the functions from the call->processor and local->processor work items into the domain of the I/O thread. The call event processor, now called from the I/O thread, then takes over the job of cranking the call state machine, processing incoming packets and transmitting DATA, ACK and ABORT packets. In a future patch, rxrpc_send_ACK() will transmit the ACK on the spot rather than queuing it for later transmission. The call event processor becomes purely received-skb driven. It only transmits things in response to events. We use "pokes" to queue a dummy skb to make it do things like start/resume transmitting data. Timer expiry also results in pokes. The connection event processor, becomes similar, though crypto events, such as dealing with CHALLENGE and RESPONSE packets is offloaded to a work item to avoid doing crypto in the I/O thread. The local event processor is removed and VERSION response packets are generated directly from the packet parser. Similarly, ABORTs generated in response to protocol errors will be transmitted immediately rather than being pushed onto a queue for later transmission. Changes: ======== ver #2) - Fix a couple of introduced lock context imbalances. Signed-off-by: David Howells <[email protected]> cc: Marc Dionne <[email protected]> cc: [email protected] (cherry picked from commit 5e6ef4f) Signed-off-by: Jonathan Maple <[email protected]> # Conflicts: # include/trace/events/rxrpc.h # net/rxrpc/ar-internal.h # net/rxrpc/call_accept.c # net/rxrpc/call_event.c # net/rxrpc/call_object.c # net/rxrpc/conn_object.c # net/rxrpc/input.c # net/rxrpc/io_thread.c # net/rxrpc/local_event.c # net/rxrpc/local_object.c # net/rxrpc/output.c # net/rxrpc/peer_event.c # net/rxrpc/sendmsg.c

jira LE-1907 Rebuild_History Non-Buildable kernel-5.14.0-284.30.1.el9_2 commit-author David Howells <[email protected]> commit 608aecd Empty-Commit: Cherry-Pick Conflicts during history rebuild. Will be included in final tarball splat. Ref for failed cherry-pick at: ciq/ciq_backports/kernel-5.14.0-284.30.1.el9_2/608aecd1.failed Now that rxrpc_put_local() may call kthread_stop(), it can't be called under spinlock as it might sleep. This can cause a problem in the peer keepalive code in rxrpc as it tries to avoid dropping the peer_hash_lock from the point it needs to re-add peer->keepalive_link to going round the loop again in rxrpc_peer_keepalive_dispatch(). Fix this by just dropping the lock when we don't need it and accepting that we'll have to take it again. This code is only called about every 20s for each peer, so not very often. This allows rxrpc_put_peer_unlocked() to be removed also. If triggered, this bug produces an oops like the following, as reproduced by a syzbot reproducer for a different oops[1]: BUG: sleeping function called from invalid context at kernel/sched/completion.c:101 ... RCU nest depth: 0, expected: 0 3 locks held by kworker/u9:0/50: #0: ffff88810e74a138 ((wq_completion)krxrpcd){+.+.}-{0:0}, at: process_one_work+0x294/0x636 #1: ffff8881013a7e20 ((work_completion)(&rxnet->peer_keepalive_work)){+.+.}-{0:0}, at: process_one_work+0x294/0x636 #2: ffff88817d366390 (&rxnet->peer_hash_lock){+.+.}-{2:2}, at: rxrpc_peer_keepalive_dispatch+0x2bd/0x35f ... Call Trace: <TASK> dump_stack_lvl+0x4c/0x5f __might_resched+0x2cf/0x2f2 __wait_for_common+0x87/0x1e8 kthread_stop+0x14d/0x255 rxrpc_peer_keepalive_dispatch+0x333/0x35f rxrpc_peer_keepalive_worker+0x2e9/0x449 process_one_work+0x3c1/0x636 worker_thread+0x25f/0x359 kthread+0x1a6/0x1b5 ret_from_fork+0x1f/0x30 Fixes: a275da6 ("rxrpc: Create a per-local endpoint receive queue and I/O thread") Signed-off-by: David Howells <[email protected]> cc: Marc Dionne <[email protected]> cc: [email protected] Link: https://lore.kernel.org/r/[email protected]/ [1] Signed-off-by: David S. Miller <[email protected]> (cherry picked from commit 608aecd) Signed-off-by: Jonathan Maple <[email protected]> # Conflicts: # net/rxrpc/ar-internal.h # net/rxrpc/peer_event.c # net/rxrpc/peer_object.c

jira LE-1907 Rebuild_History Non-Buildable kernel-5.14.0-284.30.1.el9_2 commit-author Stefan Assmann <[email protected]> commit 4e264be When a system with E810 with existing VFs gets rebooted the following hang may be observed. Pid 1 is hung in iavf_remove(), part of a network driver: PID: 1 TASK: ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow" #0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb #1 [ffffaad04005fae8] schedule at ffffffff8b323e2d #2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc #3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930 ctrliq#4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf] ctrliq#5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513 ctrliq#6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa ctrliq#7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc ctrliq#8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e ctrliq#9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429 ctrliq#10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4 ctrliq#11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice] ctrliq#12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice] ctrliq#13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice] ctrliq#14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1 ctrliq#15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386 ctrliq#16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870 ctrliq#17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6 ctrliq#18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159 ctrliq#19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc ctrliq#20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d ctrliq#21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169 ctrliq#22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b RIP: 00007f1baa5c13d7 RSP: 00007fffbcc55a98 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1baa5c13d7 RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead RBP: 00007fffbcc55ca0 R8: 0000000000000000 R9: 00007fffbcc54e90 R10: 00007fffbcc55050 R11: 0000000000000202 R12: 0000000000000005 R13: 0000000000000000 R14: 00007fffbcc55af0 R15: 0000000000000000 ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b During reboot all drivers PM shutdown callbacks are invoked. In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE. In ice_shutdown() the call chain above is executed, which at some point calls iavf_remove(). However iavf_remove() expects the VF to be in one of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If that's not the case it sleeps forever. So if iavf_shutdown() gets invoked before iavf_remove() the system will hang indefinitely because the adapter is already in state __IAVF_REMOVE. Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE, as we already went through iavf_shutdown(). Fixes: 9745780 ("iavf: Add waiting so the port is initialized in remove") Fixes: a841733 ("iavf: Fix race condition between iavf_shutdown and iavf_remove") Reported-by: Marius Cornea <[email protected]> Signed-off-by: Stefan Assmann <[email protected]> Reviewed-by: Michal Kubiak <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> (cherry picked from commit 4e264be) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 Rebuild_History Non-Buildable kernel-5.14.0-284.30.1.el9_2 commit-author Michael Ellerman <[email protected]> commit 6d65028 As reported by Alan, the CFI (Call Frame Information) in the VDSO time routines is incorrect since commit ce7d805 ("powerpc/vdso: Prepare for switching VDSO to generic C implementation."). DWARF has a concept called the CFA (Canonical Frame Address), which on powerpc is calculated as an offset from the stack pointer (r1). That means when the stack pointer is changed there must be a corresponding CFI directive to update the calculation of the CFA. The current code is missing those directives for the changes to r1, which prevents gdb from being able to generate a backtrace from inside VDSO functions, eg: Breakpoint 1, 0x00007ffff7f804dc in __kernel_clock_gettime () (gdb) bt #0 0x00007ffff7f804dc in __kernel_clock_gettime () #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 #2 0x00007fffffffd960 in ?? () #3 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 Backtrace stopped: frame did not save the PC Alan helpfully describes some rules for correctly maintaining the CFI information: 1) Every adjustment to the current frame address reg (ie. r1) must be described, and exactly at the instruction where r1 changes. Why? Because stack unwinding might want to access previous frames. 2) If a function changes LR or any non-volatile register, the save location for those regs must be given. The CFI can be at any instruction after the saves up to the point that the reg is changed. (Exception: LR save should be described before a bl. not after) 3) If asychronous unwind info is needed then restores of LR and non-volatile regs must also be described. The CFI can be at any instruction after the reg is restored up to the point where the save location is (potentially) trashed. Fix the inability to backtrace by adding CFI directives describing the changes to r1, ie. satisfying rule 1. Also change the information for LR to point to the copy saved on the stack, not the value in r0 that will be overwritten by the function call. Finally, add CFI directives describing the save/restore of r2. With the fix gdb can correctly back trace and navigate up and down the stack: Breakpoint 1, 0x00007ffff7f804dc in __kernel_clock_gettime () (gdb) bt #0 0x00007ffff7f804dc in __kernel_clock_gettime () #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 #2 0x0000000100015b60 in gettime () #3 0x000000010000c8bc in print_long_format () ctrliq#4 0x000000010000d180 in print_current_files () ctrliq#5 0x00000001000054ac in main () (gdb) up #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 (gdb) #2 0x0000000100015b60 in gettime () (gdb) #3 0x000000010000c8bc in print_long_format () (gdb) ctrliq#4 0x000000010000d180 in print_current_files () (gdb) ctrliq#5 0x00000001000054ac in main () (gdb) Initial frame selected; you cannot go up. (gdb) down ctrliq#4 0x000000010000d180 in print_current_files () (gdb) #3 0x000000010000c8bc in print_long_format () (gdb) #2 0x0000000100015b60 in gettime () (gdb) #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 (gdb) #0 0x00007ffff7f804dc in __kernel_clock_gettime () (gdb) Fixes: ce7d805 ("powerpc/vdso: Prepare for switching VDSO to generic C implementation.") Cc: [email protected] # v5.11+ Reported-by: Alan Modra <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Reviewed-by: Segher Boessenkool <[email protected]> Link: https://lore.kernel.org/r/[email protected] (cherry picked from commit 6d65028) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 Rebuild_History Non-Buildable kernel-5.14.0-284.30.1.el9_2 commit-author Eelco Chaudron <[email protected]> commit de9df6c Currently, the per cpu upcall counters are allocated after the vport is created and inserted into the system. This could lead to the datapath accessing the counters before they are allocated resulting in a kernel Oops. Here is an example: PID: 59693 TASK: ffff0005f4f51500 CPU: 0 COMMAND: "ovs-vswitchd" #0 [ffff80000a39b5b0] __switch_to at ffffb70f0629f2f4 #1 [ffff80000a39b5d0] __schedule at ffffb70f0629f5cc #2 [ffff80000a39b650] preempt_schedule_common at ffffb70f0629fa60 #3 [ffff80000a39b670] dynamic_might_resched at ffffb70f0629fb58 ctrliq#4 [ffff80000a39b680] mutex_lock_killable at ffffb70f062a1388 ctrliq#5 [ffff80000a39b6a0] pcpu_alloc at ffffb70f0594460c ctrliq#6 [ffff80000a39b750] __alloc_percpu_gfp at ffffb70f05944e68 ctrliq#7 [ffff80000a39b760] ovs_vport_cmd_new at ffffb70ee6961b90 [openvswitch] ... PID: 58682 TASK: ffff0005b2f0bf00 CPU: 0 COMMAND: "kworker/0:3" #0 [ffff80000a5d2f40] machine_kexec at ffffb70f056a0758 #1 [ffff80000a5d2f70] __crash_kexec at ffffb70f057e2994 #2 [ffff80000a5d3100] crash_kexec at ffffb70f057e2ad8 #3 [ffff80000a5d3120] die at ffffb70f0628234c ctrliq#4 [ffff80000a5d31e0] die_kernel_fault at ffffb70f062828a8 ctrliq#5 [ffff80000a5d3210] __do_kernel_fault at ffffb70f056a31f4 ctrliq#6 [ffff80000a5d3240] do_bad_area at ffffb70f056a32a4 ctrliq#7 [ffff80000a5d3260] do_translation_fault at ffffb70f062a9710 ctrliq#8 [ffff80000a5d3270] do_mem_abort at ffffb70f056a2f74 ctrliq#9 [ffff80000a5d32a0] el1_abort at ffffb70f06297dac ctrliq#10 [ffff80000a5d32d0] el1h_64_sync_handler at ffffb70f06299b24 ctrliq#11 [ffff80000a5d3410] el1h_64_sync at ffffb70f056812dc ctrliq#12 [ffff80000a5d3430] ovs_dp_upcall at ffffb70ee6963c84 [openvswitch] ctrliq#13 [ffff80000a5d3470] ovs_dp_process_packet at ffffb70ee6963fdc [openvswitch] ctrliq#14 [ffff80000a5d34f0] ovs_vport_receive at ffffb70ee6972c78 [openvswitch] ctrliq#15 [ffff80000a5d36f0] netdev_port_receive at ffffb70ee6973948 [openvswitch] ctrliq#16 [ffff80000a5d3720] netdev_frame_hook at ffffb70ee6973a28 [openvswitch] ctrliq#17 [ffff80000a5d3730] __netif_receive_skb_core.constprop.0 at ffffb70f06079f90 We moved the per cpu upcall counter allocation to the existing vport alloc and free functions to solve this. Fixes: 95637d9 ("net: openvswitch: release vport resources on failure") Fixes: 1933ea3 ("net: openvswitch: Add support to count upcall packets") Signed-off-by: Eelco Chaudron <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Aaron Conole <[email protected]> Signed-off-by: David S. Miller <[email protected]> (cherry picked from commit de9df6c) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 Rebuild_History Non-Buildable kernel-5.14.0-284.30.1.el9_2 commit-author Ding Hui <[email protected]> commit 5f4fa16 We do netif_napi_add() for all allocated q_vectors[], but potentially do netif_napi_del() for part of them, then kfree q_vectors and leave invalid pointers at dev->napi_list. Reproducer: [root@host ~]# cat repro.sh #!/bin/bash pf_dbsf="0000:41:00.0" vf0_dbsf="0000:41:02.0" g_pids=() function do_set_numvf() { echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) } function do_set_channel() { local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/) [ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; } ifconfig $nic 192.168.18.5 netmask 255.255.255.0 ifconfig $nic up ethtool -L $nic combined 1 ethtool -L $nic combined 4 sleep $((RANDOM%3)) } function on_exit() { local pid for pid in "${g_pids[@]}"; do kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null done g_pids=() } trap "on_exit; exit" EXIT while :; do do_set_numvf ; done & g_pids+=($!) while :; do do_set_channel ; done & g_pids+=($!) wait Result: [ 4093.900222] ================================================================== [ 4093.900230] BUG: KASAN: use-after-free in free_netdev+0x308/0x390 [ 4093.900232] Read of size 8 at addr ffff88b4dc145640 by task repro.sh/6699 [ 4093.900233] [ 4093.900236] CPU: 10 PID: 6699 Comm: repro.sh Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1 [ 4093.900238] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021 [ 4093.900239] Call Trace: [ 4093.900244] dump_stack+0x71/0xab [ 4093.900249] print_address_description+0x6b/0x290 [ 4093.900251] ? free_netdev+0x308/0x390 [ 4093.900252] kasan_report+0x14a/0x2b0 [ 4093.900254] free_netdev+0x308/0x390 [ 4093.900261] iavf_remove+0x825/0xd20 [iavf] [ 4093.900265] pci_device_remove+0xa8/0x1f0 [ 4093.900268] device_release_driver_internal+0x1c6/0x460 [ 4093.900271] pci_stop_bus_device+0x101/0x150 [ 4093.900273] pci_stop_and_remove_bus_device+0xe/0x20 [ 4093.900275] pci_iov_remove_virtfn+0x187/0x420 [ 4093.900277] ? pci_iov_add_virtfn+0xe10/0xe10 [ 4093.900278] ? pci_get_subsys+0x90/0x90 [ 4093.900280] sriov_disable+0xed/0x3e0 [ 4093.900282] ? bus_find_device+0x12d/0x1a0 [ 4093.900290] i40e_free_vfs+0x754/0x1210 [i40e] [ 4093.900298] ? i40e_reset_all_vfs+0x880/0x880 [i40e] [ 4093.900299] ? pci_get_device+0x7c/0x90 [ 4093.900300] ? pci_get_subsys+0x90/0x90 [ 4093.900306] ? pci_vfs_assigned.part.7+0x144/0x210 [ 4093.900309] ? __mutex_lock_slowpath+0x10/0x10 [ 4093.900315] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e] [ 4093.900318] sriov_numvfs_store+0x214/0x290 [ 4093.900320] ? sriov_totalvfs_show+0x30/0x30 [ 4093.900321] ? __mutex_lock_slowpath+0x10/0x10 [ 4093.900323] ? __check_object_size+0x15a/0x350 [ 4093.900326] kernfs_fop_write+0x280/0x3f0 [ 4093.900329] vfs_write+0x145/0x440 [ 4093.900330] ksys_write+0xab/0x160 [ 4093.900332] ? __ia32_sys_read+0xb0/0xb0 [ 4093.900334] ? fput_many+0x1a/0x120 [ 4093.900335] ? filp_close+0xf0/0x130 [ 4093.900338] do_syscall_64+0xa0/0x370 [ 4093.900339] ? page_fault+0x8/0x30 [ 4093.900341] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 4093.900357] RIP: 0033:0x7f16ad4d22c0 [ 4093.900359] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 fe dd 01 00 48 89 04 24 [ 4093.900360] RSP: 002b:00007ffd6491b7f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 4093.900362] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f16ad4d22c0 [ 4093.900363] RDX: 0000000000000002 RSI: 0000000001a41408 RDI: 0000000000000001 [ 4093.900364] RBP: 0000000001a41408 R08: 00007f16ad7a1780 R09: 00007f16ae1f2700 [ 4093.900364] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000002 [ 4093.900365] R13: 0000000000000001 R14: 00007f16ad7a0620 R15: 0000000000000001 [ 4093.900367] [ 4093.900368] Allocated by task 820: [ 4093.900371] kasan_kmalloc+0xa6/0xd0 [ 4093.900373] __kmalloc+0xfb/0x200 [ 4093.900376] iavf_init_interrupt_scheme+0x63b/0x1320 [iavf] [ 4093.900380] iavf_watchdog_task+0x3d51/0x52c0 [iavf] [ 4093.900382] process_one_work+0x56a/0x11f0 [ 4093.900383] worker_thread+0x8f/0xf40 [ 4093.900384] kthread+0x2a0/0x390 [ 4093.900385] ret_from_fork+0x1f/0x40 [ 4093.900387] 0xffffffffffffffff [ 4093.900387] [ 4093.900388] Freed by task 6699: [ 4093.900390] __kasan_slab_free+0x137/0x190 [ 4093.900391] kfree+0x8b/0x1b0 [ 4093.900394] iavf_free_q_vectors+0x11d/0x1a0 [iavf] [ 4093.900397] iavf_remove+0x35a/0xd20 [iavf] [ 4093.900399] pci_device_remove+0xa8/0x1f0 [ 4093.900400] device_release_driver_internal+0x1c6/0x460 [ 4093.900401] pci_stop_bus_device+0x101/0x150 [ 4093.900402] pci_stop_and_remove_bus_device+0xe/0x20 [ 4093.900403] pci_iov_remove_virtfn+0x187/0x420 [ 4093.900404] sriov_disable+0xed/0x3e0 [ 4093.900409] i40e_free_vfs+0x754/0x1210 [i40e] [ 4093.900415] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e] [ 4093.900416] sriov_numvfs_store+0x214/0x290 [ 4093.900417] kernfs_fop_write+0x280/0x3f0 [ 4093.900418] vfs_write+0x145/0x440 [ 4093.900419] ksys_write+0xab/0x160 [ 4093.900420] do_syscall_64+0xa0/0x370 [ 4093.900421] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 4093.900422] 0xffffffffffffffff [ 4093.900422] [ 4093.900424] The buggy address belongs to the object at ffff88b4dc144200 which belongs to the cache kmalloc-8k of size 8192 [ 4093.900425] The buggy address is located 5184 bytes inside of 8192-byte region [ffff88b4dc144200, ffff88b4dc146200) [ 4093.900425] The buggy address belongs to the page: [ 4093.900427] page:ffffea00d3705000 refcount:1 mapcount:0 mapping:ffff88bf04415c80 index:0x0 compound_mapcount: 0 [ 4093.900430] flags: 0x10000000008100(slab|head) [ 4093.900433] raw: 0010000000008100 dead000000000100 dead000000000200 ffff88bf04415c80 [ 4093.900434] raw: 0000000000000000 0000000000030003 00000001ffffffff 0000000000000000 [ 4093.900434] page dumped because: kasan: bad access detected [ 4093.900435] [ 4093.900435] Memory state around the buggy address: [ 4093.900436] ffff88b4dc145500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900437] ffff88b4dc145580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900438] >ffff88b4dc145600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900438] ^ [ 4093.900439] ffff88b4dc145680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900440] ffff88b4dc145700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900440] ================================================================== Although the patch #2 (of 2) can avoid the issue triggered by this repro.sh, there still are other potential risks that if num_active_queues is changed to less than allocated q_vectors[] by unexpected, the mismatched netif_napi_add/del() can also cause UAF. Since we actually call netif_napi_add() for all allocated q_vectors unconditionally in iavf_alloc_q_vectors(), so we should fix it by letting netif_napi_del() match to netif_napi_add(). Fixes: 5eae00c ("i40evf: main driver core") Signed-off-by: Ding Hui <[email protected]> Cc: Donglin Peng <[email protected]> Cc: Huang Cun <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Madhu Chittim <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> (cherry picked from commit 5f4fa16) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 cve CVE-2023-21102 Rebuild_History Non-Buildable kernel-5.14.0-284.30.1.el9_2 commit-author Pierre Gondois <[email protected]> commit 0e68b55 Running a rt-kernel base on 6.2.0-rc3-rt1 on an Ampere Altra outputs the following: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9, name: kworker/u320:0 preempt_count: 2, expected: 0 RCU nest depth: 0, expected: 0 3 locks held by kworker/u320:0/9: #0: ffff3fff8c27d128 ((wq_completion)efi_rts_wq){+.+.}-{0:0}, at: process_one_work (./include/linux/atomic/atomic-long.h:41) #1: ffff80000861bdd0 ((work_completion)(&efi_rts_work.work)){+.+.}-{0:0}, at: process_one_work (./include/linux/atomic/atomic-long.h:41) #2: ffffdf7e1ed3e460 (efi_rt_lock){+.+.}-{3:3}, at: efi_call_rts (drivers/firmware/efi/runtime-wrappers.c:101) Preemption disabled at: efi_virtmap_load (./arch/arm64/include/asm/mmu_context.h:248) CPU: 0 PID: 9 Comm: kworker/u320:0 Tainted: G W 6.2.0-rc3-rt1 Hardware name: WIWYNN Mt.Jade Server System B81.03001.0005/Mt.Jade Motherboard, BIOS 1.08.20220218 (SCP: 1.08.20220218) 2022/02/18 Workqueue: efi_rts_wq efi_call_rts Call trace: dump_backtrace (arch/arm64/kernel/stacktrace.c:158) show_stack (arch/arm64/kernel/stacktrace.c:165) dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4)) dump_stack (lib/dump_stack.c:114) __might_resched (kernel/sched/core.c:10134) rt_spin_lock (kernel/locking/rtmutex.c:1769 (discriminator 4)) efi_call_rts (drivers/firmware/efi/runtime-wrappers.c:101) [...] This seems to come from commit ff7a167 ("arm64: efi: Execute runtime services from a dedicated stack") which adds a spinlock. This spinlock is taken through: efi_call_rts() \-efi_call_virt() \-efi_call_virt_pointer() \-arch_efi_call_virt_setup() Make 'efi_rt_lock' a raw_spinlock to avoid being preempted. [ardb: The EFI runtime services are called with a different set of translation tables, and are permitted to use the SIMD registers. The context switch code preserves/restores neither, and so EFI calls must be made with preemption disabled, rather than only disabling migration.] Fixes: ff7a167 ("arm64: efi: Execute runtime services from a dedicated stack") Signed-off-by: Pierre Gondois <[email protected]> Cc: <[email protected]> # v6.1+ Signed-off-by: Ard Biesheuvel <[email protected]> (cherry picked from commit 0e68b55) Signed-off-by: Jonathan Maple <[email protected]>

…ux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.15, round #2 - Single fix for broken usage of 'multi-MIDR' infrastructure in PI code, adding an open-coded erratum check for everyone's favorite pile of sand: Cavium ThunderX

[ Upstream commit a104042 ] The ieee80211 skb control block key (set when skb was queued) could have been removed before ieee80211_tx_dequeue() call. ieee80211_tx_dequeue() already called ieee80211_tx_h_select_key() to get the current key, but the latter do not update the key in skb control block in case it is NULL. Because some drivers actually use this key in their TX callbacks (e.g. ath1{1,2}k_mac_op_tx()) this could lead to the use after free below: BUG: KASAN: slab-use-after-free in ath11k_mac_op_tx+0x590/0x61c Read of size 4 at addr ffffff803083c248 by task kworker/u16:4/1440 CPU: 3 UID: 0 PID: 1440 Comm: kworker/u16:4 Not tainted 6.13.0-ge128f627f404 #2 Hardware name: HW (DT) Workqueue: bat_events batadv_send_outstanding_bcast_packet Call trace: show_stack+0x14/0x1c (C) dump_stack_lvl+0x58/0x74 print_report+0x164/0x4c0 kasan_report+0xac/0xe8 __asan_report_load4_noabort+0x1c/0x24 ath11k_mac_op_tx+0x590/0x61c ieee80211_handle_wake_tx_queue+0x12c/0x1c8 ieee80211_queue_skb+0xdcc/0x1b4c ieee80211_tx+0x1ec/0x2bc ieee80211_xmit+0x224/0x324 __ieee80211_subif_start_xmit+0x85c/0xcf8 ieee80211_subif_start_xmit+0xc0/0xec4 dev_hard_start_xmit+0xf4/0x28c __dev_queue_xmit+0x6ac/0x318c batadv_send_skb_packet+0x38c/0x4b0 batadv_send_outstanding_bcast_packet+0x110/0x328 process_one_work+0x578/0xc10 worker_thread+0x4bc/0xc7c kthread+0x2f8/0x380 ret_from_fork+0x10/0x20 Allocated by task 1906: kasan_save_stack+0x28/0x4c kasan_save_track+0x1c/0x40 kasan_save_alloc_info+0x3c/0x4c __kasan_kmalloc+0xac/0xb0 __kmalloc_noprof+0x1b4/0x380 ieee80211_key_alloc+0x3c/0xb64 ieee80211_add_key+0x1b4/0x71c nl80211_new_key+0x2b4/0x5d8 genl_family_rcv_msg_doit+0x198/0x240 <...> Freed by task 1494: kasan_save_stack+0x28/0x4c kasan_save_track+0x1c/0x40 kasan_save_free_info+0x48/0x94 __kasan_slab_free+0x48/0x60 kfree+0xc8/0x31c kfree_sensitive+0x70/0x80 ieee80211_key_free_common+0x10c/0x174 ieee80211_free_keys+0x188/0x46c ieee80211_stop_mesh+0x70/0x2cc ieee80211_leave_mesh+0x1c/0x60 cfg80211_leave_mesh+0xe0/0x280 cfg80211_leave+0x1e0/0x244 <...> Reset SKB control block key before calling ieee80211_tx_h_select_key() to avoid that. Fixes: bb42f2d ("mac80211: Move reorder-sensitive TX handlers to after TXQ dequeue") Signed-off-by: Remi Pommarel <[email protected]> Link: https://patch.msgid.link/06aa507b853ca385ceded81c18b0a6dd0f081bc8.1742833382.git.repk@triplefau.lt Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 752e221 ] SMC consists of two sockets: smc_sock and kernel TCP socket. Currently, there are two ways of creating the sockets, and syzbot reported a lockdep splat [0] for the newer way introduced by commit d25a92c ("net/smc: Introduce IPPROTO_SMC"). socket(AF_SMC , SOCK_STREAM, SMCPROTO_SMC or SMCPROTO_SMC6) socket(AF_INET or AF_INET6, SOCK_STREAM, IPPROTO_SMC) When a socket is allocated, sock_lock_init() sets a lockdep lock class to sk->sk_lock.slock based on its protocol family. In the IPPROTO_SMC case, AF_INET or AF_INET6 lock class is assigned to smc_sock. The repro sets IPV6_JOIN_ANYCAST for IPv6 UDP and SMC socket and exercises smc_switch_to_fallback() for IPPROTO_SMC. 1. smc_switch_to_fallback() is called under lock_sock() and holds smc->clcsock_release_lock. sk_lock-AF_INET6 -> &smc->clcsock_release_lock (sk_lock-AF_SMC) 2. Setting IPV6_JOIN_ANYCAST to SMC holds smc->clcsock_release_lock and calls setsockopt() for the kernel TCP socket, which holds RTNL and the kernel socket's lock_sock(). &smc->clcsock_release_lock -> rtnl_mutex (-> k-sk_lock-AF_INET6) 3. Setting IPV6_JOIN_ANYCAST to UDP holds RTNL and lock_sock(). rtnl_mutex -> sk_lock-AF_INET6 Then, lockdep detects a false-positive circular locking, .-> sk_lock-AF_INET6 -> &smc->clcsock_release_lock -> rtnl_mutex -. `-----------------------------------------------------------------' but IPPROTO_SMC should have the same locking rule as AF_SMC. sk_lock-AF_SMC -> &smc->clcsock_release_lock -> rtnl_mutex -> k-sk_lock-AF_INET6 Let's set the same lock class for smc_sock. Given AF_SMC uses the same lock class for SMCPROTO_SMC and SMCPROTO_SMC6, we do not need to separate the class for AF_INET and AF_INET6. [0]: WARNING: possible circular locking dependency detected 6.14.0-rc3-syzkaller-00267-gff202c5028a1 #0 Not tainted syz.4.1528/11571 is trying to acquire lock: ffffffff8fef8de8 (rtnl_mutex){+.+.}-{4:4}, at: ipv6_sock_ac_close+0xd9/0x110 net/ipv6/anycast.c:220 but task is already holding lock: ffff888027f596a8 (&smc->clcsock_release_lock){+.+.}-{4:4}, at: smc_clcsock_release+0x75/0xe0 net/smc/smc_close.c:30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&smc->clcsock_release_lock){+.+.}-{4:4}: __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730 smc_switch_to_fallback+0x2d/0xa00 net/smc/af_smc.c:903 smc_sendmsg+0x13d/0x520 net/smc/af_smc.c:2781 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg net/socket.c:733 [inline] ____sys_sendmsg+0xaaf/0xc90 net/socket.c:2573 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2627 __sys_sendmsg+0x16e/0x220 net/socket.c:2659 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #1 (sk_lock-AF_INET6){+.+.}-{0:0}: lock_sock_nested+0x3a/0xf0 net/core/sock.c:3645 lock_sock include/net/sock.h:1624 [inline] sockopt_lock_sock net/core/sock.c:1133 [inline] sockopt_lock_sock+0x54/0x70 net/core/sock.c:1124 do_ipv6_setsockopt+0x2160/0x4520 net/ipv6/ipv6_sockglue.c:567 ipv6_setsockopt+0xcb/0x170 net/ipv6/ipv6_sockglue.c:993 udpv6_setsockopt+0x7d/0xd0 net/ipv6/udp.c:1850 do_sock_setsockopt+0x222/0x480 net/socket.c:2303 __sys_setsockopt+0x1a0/0x230 net/socket.c:2328 __do_sys_setsockopt net/socket.c:2334 [inline] __se_sys_setsockopt net/socket.c:2331 [inline] __x64_sys_setsockopt+0xbd/0x160 net/socket.c:2331 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (rtnl_mutex){+.+.}-{4:4}: check_prev_add kernel/locking/lockdep.c:3163 [inline] check_prevs_add kernel/locking/lockdep.c:3282 [inline] validate_chain kernel/locking/lockdep.c:3906 [inline] __lock_acquire+0x249e/0x3c40 kernel/locking/lockdep.c:5228 lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5851 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730 ipv6_sock_ac_close+0xd9/0x110 net/ipv6/anycast.c:220 inet6_release+0x47/0x70 net/ipv6/af_inet6.c:485 __sock_release net/socket.c:647 [inline] sock_release+0x8e/0x1d0 net/socket.c:675 smc_clcsock_release+0xb7/0xe0 net/smc/smc_close.c:34 __smc_release+0x5c2/0x880 net/smc/af_smc.c:301 smc_release+0x1fc/0x5f0 net/smc/af_smc.c:344 __sock_release+0xb0/0x270 net/socket.c:647 sock_close+0x1c/0x30 net/socket.c:1398 __fput+0x3ff/0xb70 fs/file_table.c:464 task_work_run+0x14e/0x250 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x27b/0x2a0 kernel/entry/common.c:218 do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Chain exists of: rtnl_mutex --> sk_lock-AF_INET6 --> &smc->clcsock_release_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&smc->clcsock_release_lock); lock(sk_lock-AF_INET6); lock(&smc->clcsock_release_lock); lock(rtnl_mutex); *** DEADLOCK *** 2 locks held by syz.4.1528/11571: #0: ffff888077e88208 (&sb->s_type->i_mutex_key#10){+.+.}-{4:4}, at: inode_lock include/linux/fs.h:877 [inline] #0: ffff888077e88208 (&sb->s_type->i_mutex_key#10){+.+.}-{4:4}, at: __sock_release+0x86/0x270 net/socket.c:646 #1: ffff888027f596a8 (&smc->clcsock_release_lock){+.+.}-{4:4}, at: smc_clcsock_release+0x75/0xe0 net/smc/smc_close.c:30 stack backtrace: CPU: 0 UID: 0 PID: 11571 Comm: syz.4.1528 Not tainted 6.14.0-rc3-syzkaller-00267-gff202c5028a1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_circular_bug+0x490/0x760 kernel/locking/lockdep.c:2076 check_noncircular+0x31a/0x400 kernel/locking/lockdep.c:2208 check_prev_add kernel/locking/lockdep.c:3163 [inline] check_prevs_add kernel/locking/lockdep.c:3282 [inline] validate_chain kernel/locking/lockdep.c:3906 [inline] __lock_acquire+0x249e/0x3c40 kernel/locking/lockdep.c:5228 lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5851 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730 ipv6_sock_ac_close+0xd9/0x110 net/ipv6/anycast.c:220 inet6_release+0x47/0x70 net/ipv6/af_inet6.c:485 __sock_release net/socket.c:647 [inline] sock_release+0x8e/0x1d0 net/socket.c:675 smc_clcsock_release+0xb7/0xe0 net/smc/smc_close.c:34 __smc_release+0x5c2/0x880 net/smc/af_smc.c:301 smc_release+0x1fc/0x5f0 net/smc/af_smc.c:344 __sock_release+0xb0/0x270 net/socket.c:647 sock_close+0x1c/0x30 net/socket.c:1398 __fput+0x3ff/0xb70 fs/file_table.c:464 task_work_run+0x14e/0x250 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x27b/0x2a0 kernel/entry/common.c:218 do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f8b4b38d169 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe4efd22d8 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4 RAX: 0000000000000000 RBX: 00000000000b14a3 RCX: 00007f8b4b38d169 RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003 RBP: 00007f8b4b5a7ba0 R08: 0000000000000001 R09: 000000114efd25cf R10: 00007f8b4b200000 R11: 0000000000000246 R12: 00007f8b4b5a5fac R13: 00007f8b4b5a5fa0 R14: ffffffffffffffff R15: 00007ffe4efd23f0 </TASK> Fixes: d25a92c ("net/smc: Introduce IPPROTO_SMC") Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=be6f4b383534d88989f7 Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Wenjia Zhang <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit d54d610 upstream. Communicating with the hypervisor using the shared GHCB page requires clearing the C bit in the mapping of that page. When executing in the context of the EFI boot services, the page tables are owned by the firmware, and this manipulation is not possible. So switch to a different API for accepting memory in SEV-SNP guests, one which is actually supported at the point during boot where the EFI stub may need to accept memory, but the SEV-SNP init code has not executed yet. For simplicity, also switch the memory acceptance carried out by the decompressor when not booting via EFI - this only involves the allocation for the decompressed kernel, and is generally only called after kexec, as normal boot will jump straight into the kernel from the EFI stub. Fixes: 6c32117 ("x86/sev: Add SNP-specific unaccepted memory support") Tested-by: Tom Lendacky <[email protected]> Co-developed-by: Tom Lendacky <[email protected]> Signed-off-by: Tom Lendacky <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Cc: <[email protected]> Cc: Dionna Amalie Glaze <[email protected]> Cc: Kevin Loughlin <[email protected]> Cc: Kirill A. Shutemov <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] # discussion thread #1 Link: https://lore.kernel.org/r/[email protected] # discussion thread #2 Link: https://lore.kernel.org/r/[email protected] # final submission Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit afcdf51 upstream. Commit 7da55c2 ("drm/amd/display: Remove incorrect FP context start") removes the FP context protection of dml2_create(), and it said "All the DC_FP_START/END should be used before call anything from DML2". However, dml2_init()/dml21_init() are not protected from their callers, causing such errors: do_fpu invoked from kernel context![#1]: CPU: 0 UID: 0 PID: 239 Comm: kworker/0:5 Not tainted 6.14.0-rc6+ #2 Workqueue: events work_for_cpu_fn pc ffff80000319de80 ra ffff80000319de5c tp 900000010575c000 sp 900000010575f840 a0 0000000000000000 a1 900000012f210130 a2 900000012f000000 a3 ffff80000357e268 a4 ffff80000357e260 a5 900000012ea52cf0 a6 0000000400000004 a7 0000012c00001388 t0 00001900000015e0 t1 ffff80000379d000 t2 0000000010624dd3 t3 0000006400000014 t4 00000000000003e8 t5 0000005000000018 t6 0000000000000020 t7 0000000f00000064 t8 000000000000002f u0 5f5e9200f8901912 s9 900000012d380010 s0 900000012ea51fd8 s1 900000012f000000 s2 9000000109296000 s3 0000000000000001 s4 0000000000001fd8 s5 0000000000000001 s6 ffff800003415000 s7 900000012d390000 s8 ffff800003211f80 ra: ffff80000319de5c dml21_apply_soc_bb_overrides+0x3c/0x960 [amdgpu] ERA: ffff80000319de80 dml21_apply_soc_bb_overrides+0x60/0x960 [amdgpu] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 000f0000 [FPD] (IS= ECode=15 EsubCode=0) PRID: 0014d010 (Loongson-64bit, Loongson-3C6000/S) Process kworker/0:5 (pid: 239, threadinfo=00000000927eadc6, task=000000008fd31682) Stack : 00040dc000003164 0000000000000001 900000012f210130 900000012eabeeb8 900000012f000000 ffff80000319fe48 900000012f210000 900000012f210130 900000012f000000 900000012eabeeb8 0000000000000001 ffff8000031a0064 900000010575f9f0 900000012f210130 900000012eac0000 900000012ea80000 900000012f000000 ffff8000031cefc4 900000010575f9f0 ffff8000035859c0 ffff800003414000 900000010575fa78 900000012f000000 ffff8000031b4c50 0000000000000000 9000000101c9d700 9000000109c40000 5f5e9200f8901912 900000012d3c4bd0 900000012d3c5000 ffff8000034aed18 900000012d380010 900000012d3c4bd0 ffff800003414000 900000012d380000 ffff800002ea49dc 0000000000000001 900000012d3c6000 00000000ffffe423 0000000000010000 ... Call Trace: [<ffff80000319de80>] dml21_apply_soc_bb_overrides+0x60/0x960 [amdgpu] [<ffff80000319fe44>] dml21_init+0xa4/0x280 [amdgpu] [<ffff8000031a0060>] dml21_create+0x40/0x80 [amdgpu] [<ffff8000031cefc0>] dc_state_create+0x100/0x160 [amdgpu] [<ffff8000031b4c4c>] dc_create+0x44c/0x640 [amdgpu] [<ffff800002ea49d8>] amdgpu_dm_init+0x3f8/0x2060 [amdgpu] [<ffff800002ea6658>] dm_hw_init+0x18/0x60 [amdgpu] [<ffff800002b16738>] amdgpu_device_init+0x1938/0x27e0 [amdgpu] [<ffff800002b18e80>] amdgpu_driver_load_kms+0x20/0xa0 [amdgpu] [<ffff800002b0c8f0>] amdgpu_pci_probe+0x1b0/0x580 [amdgpu] [<900000000448eae4>] local_pci_probe+0x44/0xc0 [<9000000003b02b18>] work_for_cpu_fn+0x18/0x40 [<9000000003b05da0>] process_one_work+0x160/0x300 [<9000000003b06718>] worker_thread+0x318/0x440 [<9000000003b11b8c>] kthread+0x12c/0x220 [<9000000003ac1484>] ret_from_kernel_thread+0x8/0xa4 Unfortunately, protecting dml2_init()/dml21_init() out of DML2 causes "sleeping function called from invalid context", so protect them with DC_FP_START() and DC_FP_END() inside. Fixes: 7da55c2 ("drm/amd/display: Remove incorrect FP context start") Cc: [email protected] Signed-off-by: Huacai Chen <[email protected]> Reviewed-by: Aurabindo Pillai <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

JIRA: https://issues.redhat.com/browse/RHEL-74483 CVE: CVE-2024-54191 commit 7a17308 Author: Iulia Tanasescu <[email protected]> Date: Mon Dec 9 11:42:18 2024 +0200 Bluetooth: iso: Fix circular lock in iso_conn_big_sync This fixes the circular locking dependency warning below, by reworking iso_sock_recvmsg, to ensure that the socket lock is always released before calling a function that locks hdev. [ 561.670344] ====================================================== [ 561.670346] WARNING: possible circular locking dependency detected [ 561.670349] 6.12.0-rc6+ ctrliq#26 Not tainted [ 561.670351] ------------------------------------------------------ [ 561.670353] iso-tester/3289 is trying to acquire lock: [ 561.670355] ffff88811f600078 (&hdev->lock){+.+.}-{3:3}, at: iso_conn_big_sync+0x73/0x260 [bluetooth] [ 561.670405] but task is already holding lock: [ 561.670407] ffff88815af58258 (sk_lock-AF_BLUETOOTH){+.+.}-{0:0}, at: iso_sock_recvmsg+0xbf/0x500 [bluetooth] [ 561.670450] which lock already depends on the new lock. [ 561.670452] the existing dependency chain (in reverse order) is: [ 561.670453] -> #2 (sk_lock-AF_BLUETOOTH){+.+.}-{0:0}: [ 561.670458] lock_acquire+0x7c/0xc0 [ 561.670463] lock_sock_nested+0x3b/0xf0 [ 561.670467] bt_accept_dequeue+0x1a5/0x4d0 [bluetooth] [ 561.670510] iso_sock_accept+0x271/0x830 [bluetooth] [ 561.670547] do_accept+0x3dd/0x610 [ 561.670550] __sys_accept4+0xd8/0x170 [ 561.670553] __x64_sys_accept+0x74/0xc0 [ 561.670556] x64_sys_call+0x17d6/0x25f0 [ 561.670559] do_syscall_64+0x87/0x150 [ 561.670563] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 561.670567] -> #1 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}: [ 561.670571] lock_acquire+0x7c/0xc0 [ 561.670574] lock_sock_nested+0x3b/0xf0 [ 561.670577] iso_sock_listen+0x2de/0xf30 [bluetooth] [ 561.670617] __sys_listen_socket+0xef/0x130 [ 561.670620] __x64_sys_listen+0xe1/0x190 [ 561.670623] x64_sys_call+0x2517/0x25f0 [ 561.670626] do_syscall_64+0x87/0x150 [ 561.670629] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 561.670632] -> #0 (&hdev->lock){+.+.}-{3:3}: [ 561.670636] __lock_acquire+0x32ad/0x6ab0 [ 561.670639] lock_acquire.part.0+0x118/0x360 [ 561.670642] lock_acquire+0x7c/0xc0 [ 561.670644] __mutex_lock+0x18d/0x12f0 [ 561.670647] mutex_lock_nested+0x1b/0x30 [ 561.670651] iso_conn_big_sync+0x73/0x260 [bluetooth] [ 561.670687] iso_sock_recvmsg+0x3e9/0x500 [bluetooth] [ 561.670722] sock_recvmsg+0x1d5/0x240 [ 561.670725] sock_read_iter+0x27d/0x470 [ 561.670727] vfs_read+0x9a0/0xd30 [ 561.670731] ksys_read+0x1a8/0x250 [ 561.670733] __x64_sys_read+0x72/0xc0 [ 561.670736] x64_sys_call+0x1b12/0x25f0 [ 561.670738] do_syscall_64+0x87/0x150 [ 561.670741] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 561.670744] other info that might help us debug this: [ 561.670745] Chain exists of: &hdev->lock --> sk_lock-AF_BLUETOOTH-BTPROTO_ISO --> sk_lock-AF_BLUETOOTH [ 561.670751] Possible unsafe locking scenario: [ 561.670753] CPU0 CPU1 [ 561.670754] ---- ---- [ 561.670756] lock(sk_lock-AF_BLUETOOTH); [ 561.670758] lock(sk_lock AF_BLUETOOTH-BTPROTO_ISO); [ 561.670761] lock(sk_lock-AF_BLUETOOTH); [ 561.670764] lock(&hdev->lock); [ 561.670767] *** DEADLOCK *** Fixes: 07a9342 ("Bluetooth: ISO: Send BIG Create Sync via hci_sync") Signed-off-by: Iulia Tanasescu <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Bastien Nocera <[email protected]>

[BUG] There is a bug report that a syzbot reproducer can lead to the following busy inode at unmount time: BTRFS info (device loop1): last unmount of filesystem 1680000e-3c1e-4c46-84b6-56bd3909af50 VFS: Busy inodes after unmount of loop1 (btrfs) ------------[ cut here ]------------ kernel BUG at fs/super.c:650! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 48168 Comm: syz-executor Not tainted 6.15.0-rc2-00471-g119009db2674 #2 PREEMPT(full) Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:generic_shutdown_super+0x2e9/0x390 fs/super.c:650 Call Trace: <TASK> kill_anon_super+0x3a/0x60 fs/super.c:1237 btrfs_kill_super+0x3b/0x50 fs/btrfs/super.c:2099 deactivate_locked_super+0xbe/0x1a0 fs/super.c:473 deactivate_super fs/super.c:506 [inline] deactivate_super+0xe2/0x100 fs/super.c:502 cleanup_mnt+0x21f/0x440 fs/namespace.c:1435 task_work_run+0x14d/0x240 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x269/0x290 kernel/entry/common.c:218 do_syscall_64+0xd4/0x250 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> [CAUSE] When btrfs_alloc_path() failed, btrfs_iget() directly returned without releasing the inode already allocated by btrfs_iget_locked(). This results the above busy inode and trigger the kernel BUG. [FIX] Fix it by calling iget_failed() if btrfs_alloc_path() failed. If we hit error inside btrfs_read_locked_inode(), it will properly call iget_failed(), so nothing to worry about. Although the iget_failed() cleanup inside btrfs_read_locked_inode() is a break of the normal error handling scheme, let's fix the obvious bug and backport first, then rework the error handling later. Reported-by: Penglei Jiang <[email protected]> Link: https://lore.kernel.org/linux-btrfs/[email protected]/ Fixes: 7c855e1 ("btrfs: remove conditional path allocation in btrfs_read_locked_inode()") CC: [email protected] # 6.13+ Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Penglei Jiang <[email protected]> Signed-off-by: David Sterba <[email protected]>

commit ab680dc upstream. Fix deadlock in job submission and abort handling. When a thread aborts currently executing jobs due to a fault, it first locks the global lock protecting submitted_jobs (#1). After the last job is destroyed, it proceeds to release the related context and locks file_priv (#2). Meanwhile, in the job submission thread, the file_priv lock (#2) is taken first, and then the submitted_jobs lock (#1) is obtained when a job is added to the submitted jobs list. CPU0 CPU1 ---- ---- (for example due to a fault) (jobs submissions keep coming) lock(&vdev->submitted_jobs_lock) #1 ivpu_jobs_abort_all() job_destroy() lock(&file_priv->lock) #2 lock(&vdev->submitted_jobs_lock) #1 file_priv_release() lock(&vdev->context_list_lock) lock(&file_priv->lock) #2 This order of locking causes a deadlock. To resolve this issue, change the order of locking in ivpu_job_submit(). Signed-off-by: Karol Wachowski <[email protected]> Signed-off-by: Maciej Falkowski <[email protected]> Reviewed-by: Jacek Lawrynowicz <[email protected]> Signed-off-by: Jacek Lawrynowicz <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] [ This backport required small adjustments to ivpu_job_submit(), which lacks support for explicit command queue creation added in 6.15. ] Signed-off-by: Jacek Lawrynowicz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 93ae6e6 Author: Lu Baolu <[email protected]> Date: Wed Mar 19 10:21:01 2025 +0800 iommu/vt-d: Fix possible circular locking dependency We have recently seen report of lockdep circular lock dependency warnings on platforms like Skylake and Kabylake: ====================================================== WARNING: possible circular locking dependency detected 6.14.0-rc6-CI_DRM_16276-gca2c04fe76e8+ #1 Not tainted ------------------------------------------------------ swapper/0/1 is trying to acquire lock: ffffffff8360ee48 (iommu_probe_device_lock){+.+.}-{3:3}, at: iommu_probe_device+0x1d/0x70 but task is already holding lock: ffff888102c7efa8 (&device->physical_node_lock){+.+.}-{3:3}, at: intel_iommu_init+0xe75/0x11f0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> ctrliq#6 (&device->physical_node_lock){+.+.}-{3:3}: __mutex_lock+0xb4/0xe40 mutex_lock_nested+0x1b/0x30 intel_iommu_init+0xe75/0x11f0 pci_iommu_init+0x13/0x70 do_one_initcall+0x62/0x3f0 kernel_init_freeable+0x3da/0x6a0 kernel_init+0x1b/0x200 ret_from_fork+0x44/0x70 ret_from_fork_asm+0x1a/0x30 -> ctrliq#5 (dmar_global_lock){++++}-{3:3}: down_read+0x43/0x1d0 enable_drhd_fault_handling+0x21/0x110 cpuhp_invoke_callback+0x4c6/0x870 cpuhp_issue_call+0xbf/0x1f0 __cpuhp_setup_state_cpuslocked+0x111/0x320 __cpuhp_setup_state+0xb0/0x220 irq_remap_enable_fault_handling+0x3f/0xa0 apic_intr_mode_init+0x5c/0x110 x86_late_time_init+0x24/0x40 start_kernel+0x895/0xbd0 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0xbf/0x110 common_startup_64+0x13e/0x141 -> ctrliq#4 (cpuhp_state_mutex){+.+.}-{3:3}: __mutex_lock+0xb4/0xe40 mutex_lock_nested+0x1b/0x30 __cpuhp_setup_state_cpuslocked+0x67/0x320 __cpuhp_setup_state+0xb0/0x220 page_alloc_init_cpuhp+0x2d/0x60 mm_core_init+0x18/0x2c0 start_kernel+0x576/0xbd0 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0xbf/0x110 common_startup_64+0x13e/0x141 -> #3 (cpu_hotplug_lock){++++}-{0:0}: __cpuhp_state_add_instance+0x4f/0x220 iova_domain_init_rcaches+0x214/0x280 iommu_setup_dma_ops+0x1a4/0x710 iommu_device_register+0x17d/0x260 intel_iommu_init+0xda4/0x11f0 pci_iommu_init+0x13/0x70 do_one_initcall+0x62/0x3f0 kernel_init_freeable+0x3da/0x6a0 kernel_init+0x1b/0x200 ret_from_fork+0x44/0x70 ret_from_fork_asm+0x1a/0x30 -> #2 (&domain->iova_cookie->mutex){+.+.}-{3:3}: __mutex_lock+0xb4/0xe40 mutex_lock_nested+0x1b/0x30 iommu_setup_dma_ops+0x16b/0x710 iommu_device_register+0x17d/0x260 intel_iommu_init+0xda4/0x11f0 pci_iommu_init+0x13/0x70 do_one_initcall+0x62/0x3f0 kernel_init_freeable+0x3da/0x6a0 kernel_init+0x1b/0x200 ret_from_fork+0x44/0x70 ret_from_fork_asm+0x1a/0x30 -> #1 (&group->mutex){+.+.}-{3:3}: __mutex_lock+0xb4/0xe40 mutex_lock_nested+0x1b/0x30 __iommu_probe_device+0x24c/0x4e0 probe_iommu_group+0x2b/0x50 bus_for_each_dev+0x7d/0xe0 iommu_device_register+0xe1/0x260 intel_iommu_init+0xda4/0x11f0 pci_iommu_init+0x13/0x70 do_one_initcall+0x62/0x3f0 kernel_init_freeable+0x3da/0x6a0 kernel_init+0x1b/0x200 ret_from_fork+0x44/0x70 ret_from_fork_asm+0x1a/0x30 -> #0 (iommu_probe_device_lock){+.+.}-{3:3}: __lock_acquire+0x1637/0x2810 lock_acquire+0xc9/0x300 __mutex_lock+0xb4/0xe40 mutex_lock_nested+0x1b/0x30 iommu_probe_device+0x1d/0x70 intel_iommu_init+0xe90/0x11f0 pci_iommu_init+0x13/0x70 do_one_initcall+0x62/0x3f0 kernel_init_freeable+0x3da/0x6a0 kernel_init+0x1b/0x200 ret_from_fork+0x44/0x70 ret_from_fork_asm+0x1a/0x30 other info that might help us debug this: Chain exists of: iommu_probe_device_lock --> dmar_global_lock --> &device->physical_node_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&device->physical_node_lock); lock(dmar_global_lock); lock(&device->physical_node_lock); lock(iommu_probe_device_lock); *** DEADLOCK *** This driver uses a global lock to protect the list of enumerated DMA remapping units. It is necessary due to the driver's support for dynamic addition and removal of remapping units at runtime. Two distinct code paths require iteration over this remapping unit list: - Device registration and probing: the driver iterates the list to register each remapping unit with the upper layer IOMMU framework and subsequently probe the devices managed by that unit. - Global configuration: Upper layer components may also iterate the list to apply configuration changes. The lock acquisition order between these two code paths was reversed. This caused lockdep warnings, indicating a risk of deadlock. Fix this warning by releasing the global lock before invoking upper layer interfaces for device registration. Fixes: b150654 ("iommu/vt-d: Fix suspicious RCU usage") Closes: https://lore.kernel.org/linux-iommu/SJ1PR11MB612953431F94F18C954C4A9CB9D32@SJ1PR11MB6129.namprd11.prod.outlook.com/ Tested-by: Chaitanya Kumar Borah <[email protected]> Cc: [email protected] Signed-off-by: Lu Baolu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]> (cherry picked from commit 93ae6e6) Signed-off-by: Jerry Snitselaar <[email protected]> Upstream-Status: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git JIRA: https://issues.redhat.com/browse/RHEL-78704

bmastbergen added 2 commits April 24, 2025 13:07

github actions: Add build check action

49850fa

hacks for bmastbergen/kernel-src-tree

186ec6d

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Ciqcbr7 9 pr #2

Ciqcbr7 9 pr #2

bmastbergen commented Apr 24, 2025

Ciqcbr7 9 pr #2

Are you sure you want to change the base?

Ciqcbr7 9 pr #2

Conversation

bmastbergen commented Apr 24, 2025