build(deps): bump starlette from 0.49.1 to 1.0.1 in /02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent

[dependabot]

Bumps starlette from 0.49.1 to 1.0.1.

Release notes

Sourced from starlette's releases.

Version 1.0.1

What's Changed

• Ignore malformed Host header when constructing request.url by @​Kludex in Kludex/starlette#3279

Full Changelog: Kludex/starlette@1.0.0...1.0.1

Version 1.0.0

Starlette 1.0 is here! 🎉

After nearly eight years since its creation, Starlette has reached its first stable release.

A special thank you to @​lovelydinosaur, the creator of Starlette, Uvicorn, HTTPX and MkDocs, whose work helped to lay the foundation for the modern async Python ecosystem. 🙏

Thank you to @​adriangb, @​graingert, @​agronholm, @​florimondmanca, @​aminalaee, @​tiangolo, @​alex-oleshkevich, @​abersheeran, and @​uSpike for helping make Starlette what it is today. And to all my sponsors - especially @​tiangolo, @​huggingface, and @​elevenlabs - thank you for your support!

Thank you to all 290+ contributors who have shaped Starlette over the years! ❤️

Read more on the blog post.

Check out the full release notes at https://www.starlette.io/release-notes/#100-march-22-2026

---

Full Changelog: Kludex/starlette@1.0.0rc1...1.0.0

Version 1.0.0rc1

We're ready! 🚀

The first release candidate for Starlette 1.0 is here! After years on ZeroVer, we're finally making the jump.

This release removes all deprecated features marked for 1.0.0, along with some last-minute bug fixes.

A special thank you to @​lovelydinosaur, the creator of Starlette, Uvicorn, HTTPX and MkDocs, whose work helped to lay the foundation for the modern async Python ecosystem. 🙏

Thank you to @​adriangb, @​graingert, @​agronholm, @​florimondmanca, @​aminalaee, @​tiangolo, @​alex-oleshkevich, and @​abersheeran for helping make Starlette what it is today. And to all my sponsors - especially @​tiangolo, @​huggingface, and @​elevenlabs - thank you for your support!

Thank you to all 290+ contributors who have shaped Starlette over the years!

Check out the full release notes at https://www.starlette.io/release-notes/#100rc1-february-23-2026

---

Full Changelog: Kludex/starlette@0.52.1...1.0.0rc1

Version 0.52.1

What's Changed

• Only use typing_extensions in older Python versions by @​Kludex in Kludex/starlette#3109

---

... (truncated)

Changelog

Sourced from starlette's changelog.

1.0.1 (May 21, 2026)

Fixed

• Ignore malformed Host header when constructing request.url #3279.

1.0.0 (March 22, 2026)

Starlette 1.0 is here!

After nearly eight years since its creation, Starlette has reached its first stable release. Thank you to everyone who tested the release candidate and reported issues.

You can read more on the blog post.

Added

• Track session access and modification in SessionMiddleware #3166.

Fixed

• Handle websocket denial responses in StreamingResponse and FileResponse #3189.
• Use bytearray for field accumulation in FormParser #3179.
• Move parser.finalize() inside try/except in MultiPartParser.parse() #3153.

1.0.0rc1 (February 23, 2026)

We're ready! I'm thrilled to announce the first release candidate for Starlette 1.0.

Starlette was created in June 2018 by Tom Christie, and has been on ZeroVer for years. Today, it's downloaded almost 10 million times a day, serves as the foundation for FastAPI, and has inspired many other frameworks. In the age of AI, Starlette continues to play an important role as a dependency of the Python MCP SDK.

This release focuses on removing deprecated features that were marked for removal in 1.0.0, along with some last minute bug fixes. It's a release candidate, so we can gather feedback from the community before the final 1.0.0 release soon.

A huge thank you to all the contributors who have helped make Starlette what it is today. In particular, I'd like to recognize:

• Kim Christie - The original creator of Starlette, Uvicorn, and MkDocs, and the current maintainer of HTTPX. Kim's work helped lay the foundation for the modern async Python ecosystem.
• Adrian Garcia Badaracco - One of the smartest people I know, whom I have the pleasure of working with at Pydantic.
• Thomas Grainger - My async teacher, always ready to help with questions.
• Alex Grönholm - Another async mentor, always prompt to help with questions.
• Florimond Manca - Always present in the early days of both Starlette and Uvicorn, and helped a lot in the ecosystem.
• Amin Alaee - Contributed a lot with file-related PRs.
• Sebastián Ramírez - Maintains FastAPI upstream, and always in contact to help with upstream issues.
• Alex Oleshkevich - Helped a lot on templates and many discussions.

... (truncated)

Commits

• 48f8e33 Version 1.0.1 (#3281)
• f078832 Remove Hugging Face sponsor block from docs (#3280)
• 472951e chore(deps): bump the github-actions group with 2 updates (#3277)
• 764dab0 Ignore malformed Host header when constructing request.url (#3279)
• 19d0811 Harden GitHub Actions workflows and Dependabot config (#3276)
• 01f4637 chore(deps): bump idna from 3.10 to 3.15 (#3274)
• b8fa514 docs: fix typos in TestClient docs and test_requests comment (#3266)
• e935b6b fix uvicorn domain (#3269)
• 96af952 Add 7-day cooldown for dependency resolution via uv exclude-newer (#3265)
• 61e385b Add zizmor GitHub Actions security analysis workflow (#3264)
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
  You can disable automated security fix PRs for this repo from the Security Alerts page.

[github-actions]

Latest scan for commit: 71522c1 | Updated: 2026-06-04 17:14:14 UTC

Security Scan Results

Scan Metadata

• Project: ASH
• Scan executed: 2026-06-04T17:03:22+00:00
• ASH version: 3.0.0

Summary

Scanner Results

The table below shows findings by scanner, with status based on severity thresholds and dependencies:

Column Explanations:

Severity Levels (S/C/H/M/L/I):

• Suppressed (S): Security findings that have been explicitly suppressed/ignored and don't affect the scanner's pass/fail status
• Critical (C): The most severe security vulnerabilities requiring immediate remediation (e.g., SQL injection, remote code execution)
• High (H): Serious security vulnerabilities that should be addressed promptly (e.g., authentication bypasses, privilege escalation)
• Medium (M): Moderate security risks that should be addressed in normal development cycles (e.g., weak encryption, input validation issues)
• Low (L): Minor security concerns with limited impact (e.g., information disclosure, weak recommendations)
• Info (I): Informational findings for awareness with minimal security risk (e.g., code quality suggestions, best practice recommendations)

Other Columns:

• Time: Duration taken by each scanner to complete its analysis
• Action: Total number of actionable findings at or above the configured severity threshold that require attention

Scanner Results:

• PASSED: Scanner found no security issues at or above the configured severity threshold - code is clean for this scanner
• FAILED: Scanner found security vulnerabilities at or above the threshold that require attention and remediation
• MISSING: Scanner could not run because required dependencies/tools are not installed or available
• SKIPPED: Scanner was intentionally disabled or excluded from this scan
• ERROR: Scanner encountered an execution error and could not complete successfully

Severity Thresholds (Thresh Column):

• CRITICAL: Only Critical severity findings cause scanner to fail
• HIGH: High and Critical severity findings cause scanner to fail
• MEDIUM (MED): Medium, High, and Critical severity findings cause scanner to fail
• LOW: Low, Medium, High, and Critical severity findings cause scanner to fail
• ALL: Any finding of any severity level causes scanner to fail

Threshold Source: Values in parentheses indicate where the threshold is configured:

• (g) = global: Set in the global_settings section of ASH configuration
• (c) = config: Set in the individual scanner configuration section
• (s) = scanner: Default threshold built into the scanner itself

Statistics calculation:

• All statistics are calculated from the final aggregated SARIF report
• Suppressed findings are counted separately and do not contribute to actionable findings
• Scanner status is determined by comparing actionable findings to the threshold

Scanner	S	C	H	M	L	I	Time	Action	Result	Thresh
bandit	0	0	0	0	0	0	690ms	0	PASSED	MED (g)
cdk-nag	0	0	0	0	0	0	28.5s	0	PASSED	MED (g)
cfn-nag	0	0	0	0	0	0	6ms	0	PASSED	MED (g)
checkov	0	0	0	0	0	0	4.5s	0	PASSED	MED (g)
detect-secrets	0	0	0	0	0	0	656ms	0	PASSED	MED (g)
grype	0	9	0	5	1	0	48.5s	14	FAILED	MED (g)
npm-audit	0	0	0	0	0	0	187ms	0	PASSED	MED (g)
opengrep	0	0	0	0	0	0	<1ms	0	SKIPPED	MED (g)
semgrep	0	0	0	0	0	0	<1ms	0	MISSING	MED (g)
syft	0	0	0	0	0	0	2.2s	0	PASSED	MED (g)

Detailed Findings

Show 14 actionable findings

Finding 1: GHSA-wp53-j4wj-2cfg-python-multipart

• Severity: HIGH
• Scanner: grype
• Rule ID: GHSA-wp53-j4wj-2cfg-python-multipart
• Location: 02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt:1

Description:
A high vulnerability in python package: python-multipart, version 0.0.20 was found at: /02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt

---

Finding 2: GHSA-pp6c-gr5w-3c5g-python-multipart

• Severity: HIGH
• Scanner: grype
• Rule ID: GHSA-pp6c-gr5w-3c5g-python-multipart
• Location: 02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt:1

Description:
A high vulnerability in python package: python-multipart, version 0.0.20 was found at: /02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt

---

Finding 3: GHSA-38jv-5279-wg99-urllib3

• Severity: HIGH
• Scanner: grype
• Rule ID: GHSA-38jv-5279-wg99-urllib3
• Location: 02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt:1

Description:
A high vulnerability in python package: urllib3, version 2.6.0 was found at: /02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt

---

Finding 4: GHSA-63vm-454h-vhhq-pyasn1

• Severity: HIGH
• Scanner: grype
• Rule ID: GHSA-63vm-454h-vhhq-pyasn1
• Location: 02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt:1

Description:
A high vulnerability in python package: pyasn1, version 0.6.1 was found at: /02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt

---

Finding 5: GHSA-jr27-m4p2-rc6r-pyasn1

• Severity: HIGH
• Scanner: grype
• Rule ID: GHSA-jr27-m4p2-rc6r-pyasn1
• Location: 02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt:1

Description:
A high vulnerability in python package: pyasn1, version 0.6.1 was found at: /02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt

---

Finding 6: GHSA-mf9v-mfxr-j63j-urllib3

• Severity: HIGH
• Scanner: grype
• Rule ID: GHSA-mf9v-mfxr-j63j-urllib3
• Location: 02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt:1

Description:
A high vulnerability in python package: urllib3, version 2.6.0 was found at: /02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt

---

Finding 7: GHSA-p423-j2cm-9vmq-cryptography

• Severity: MEDIUM
• Scanner: grype
• Rule ID: GHSA-p423-j2cm-9vmq-cryptography
• Location: 02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt:1

Description:
A medium vulnerability in python package: cryptography, version 46.0.5 was found at: /02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt

---

Finding 8: GHSA-mj87-hwqh-73pj-python-multipart

• Severity: MEDIUM
• Scanner: grype
• Rule ID: GHSA-mj87-hwqh-73pj-python-multipart
• Location: 02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt:1

Description:
A medium vulnerability in python package: python-multipart, version 0.0.20 was found at: /02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt

---

Finding 9: GHSA-752w-5fwx-jx9f-pyjwt

• Severity: HIGH
• Scanner: grype
• Rule ID: GHSA-752w-5fwx-jx9f-pyjwt
• Location: 02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt:1

Description:
A high vulnerability in python package: pyjwt, version 2.11.0 was found at: /02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt

---

Finding 10: GHSA-7gcm-g887-7qv7-protobuf

• Severity: HIGH
• Scanner: grype
• Rule ID: GHSA-7gcm-g887-7qv7-protobuf
• Location: 02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt:1

Description:
A high vulnerability in python package: protobuf, version 6.32.1 was found at: /02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt

---

Finding 11: GHSA-qccp-gfcp-xxvc-urllib3

• Severity: HIGH
• Scanner: grype
• Rule ID: GHSA-qccp-gfcp-xxvc-urllib3
• Location: 02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt:1

Description:
A high vulnerability in python package: urllib3, version 2.6.0 was found at: /02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt

---

Finding 12: GHSA-gc5v-m9x4-r6x2-requests

• Severity: MEDIUM
• Scanner: grype
• Rule ID: GHSA-gc5v-m9x4-r6x2-requests
• Location: 02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt:1

Description:
A medium vulnerability in python package: requests, version 2.32.5 was found at: /02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt

---

Finding 13: GHSA-mf9w-mj56-hr94-python-dotenv

• Severity: MEDIUM
• Scanner: grype
• Rule ID: GHSA-mf9w-mj56-hr94-python-dotenv
• Location: 02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt:1

Description:
A medium vulnerability in python package: python-dotenv, version 1.1.1 was found at: /02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt

---

Finding 14: GHSA-65pc-fj4g-8rjx-idna

• Severity: MEDIUM
• Scanner: grype
• Rule ID: GHSA-65pc-fj4g-8rjx-idna
• Location: 02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt:1

Description:
A medium vulnerability in python package: idna, version 3.11 was found at: /02-use-cases/A2A-multi-agent-incident-response/monitoring_strands_agent/requirements.txt

---

Report generated by Automated Security Helper (ASH) at 2026-06-04T17:03:16+00:00