note on wet

Pioreactor · Feb 8, 2024 · 5b16418 · 5b16418
1 parent 29ee16e
commit 5b16418
Show file tree

Hide file tree

Showing 2 changed files with 7 additions and 6 deletions.
diff --git a/user-guide/02-Experiment basics/02-prepare-vial-for-cultures.md b/user-guide/02-Experiment basics/02-prepare-vial-for-cultures.md
@@ -71,12 +71,12 @@ We recommend handling the vial with gloves, or handling only the cap. Minimize t
 
 ### 7. Positioning glassware in the Pioreactor sleeve
 
-Place the glassware vial into the Pioreactor sleeve. **The outside of the glassware vial should be clean and dry**. If the vial is wet, even with single droplet, it can damage the electronics underneath.
-
-:::tip
-Ensure that the vial is pressed all the way down and is touching the bottom of the vial holder. This ensures correct temperature regulation of the culture.
+:::danger
+The outside of the glassware vial should be **dry**. If the vial is wet, even with single droplet, it can damage the electronics underneath.
 :::
 
+Place the glassware vial into the Pioreactor sleeve. Ensure that the vial is pressed all the way down and is touching the bottom of the vial holder. This ensures correct temperature regulation of the culture.
+
 
 Next, you can [start your experiment](/user-guide/set-up-an-experiment) in the browser.
 

diff --git a/user-guide/30-Advanced/07-additional-hardware/01-pumps.md b/user-guide/30-Advanced/07-additional-hardware/01-pumps.md
@@ -7,9 +7,10 @@ The PWM output default to 5V (specifically, it's tied to the power supply, so it
 
 Note that the inner tubing on pumps is often different from the outer tubing. For example, for the peristaltic pumps that we supply:
 
-- Interior tubing dimensions: **1/8" OD, **1/32" ID** or **3mm OD, 1mm ID**
+- Interior tubing dimensions: **1/8" OD, 1/32" ID** or **3mm OD, 1mm ID**
 
-- Exterior tubing dimensions: **1/8" OD, 1/16" ID**
+- Exterior tubing di
+mensions: **1/8" OD, 1/16" ID**
 
 
 ----