Skip to content

Home

Jump to bottom
Kneschtie edited this page Apr 10, 2021 · 1 revision

Setup the Raspberry pi

Download the raspberry pi image and write it on to a sd card

In my example i will use the raspberry pi 4b 4GB

  1. Download the raspberry pi imager Raspberry pi Imager
  2. In the raspberry pi imager select Raspberry Pi os (32bit) and then select the micro sd card that is plugged into your pc and you want to use the raspberry pi to boot from.
  3. After the image is successfully installed eject the sd card and insert it again. Open the sd card with your explorer and add a file with the name ssh but remove the ending so only ssh . Then plug the micro sd card into the raspberry pi and boot it up.
Clone this wiki locally