Elelabs adapters is supported but not recommended

Move Elelabs adapters to list of supported but not recommended Zigbee radios

source/_integrations/zha.markdown

@@ -97,8 +97,6 @@ Some other Zigbee coordinator hardware may not support a firmware that is capabl
   - [Home Assistant Connect ZBT-1](/connectzbt1/) (EFR32MG21-based USB dongle)
   - [Home Assistant Yellow](/yellow/) with integrated EFR32MG21 radio
   - [ITead SONOFF Zigbee 3.0 USB Dongle Plus Model "ZBDongle-E" (EFR32MG21 variant)](https://itead.cc/product/zigbee-3-0-usb-dongle/)
-  - [Elelabs Zigbee USB Adapter](https://elelabs.com/products/elelabs-usb-adapter.html)/POPP ZB-Stick (Note! Not a must but recommend [upgrade the EmberZNet NCP application firmware](https://github.com/Elelabs/elelabs-zigbee-ezsp-utility))
-  - [Elelabs Zigbee Raspberry Pi Shield](https://elelabs.com/products/elelabs-zigbee-shield.html) (Note! Not a must but recommend [upgrade the EmberZNet NCP application firmware](https://github.com/Elelabs/elelabs-zigbee-ezsp-utility))
   - [SMLIGHT SLZB-07](https://smlight.tech/product/slzb-07/) (EFR32MG21-based USB dongle)
 - Texas Instruments based radios (via the [zigpy-znp](https://github.com/zigpy/zigpy-znp) library for zigpy)
   - [CC2652P/CC2652R/CC2652RB USB stick, module, or dev board hardware flashed with Z-Stack coordinator firmware](https://www.zigbee2mqtt.io/guide/adapters/)
@@ -112,6 +110,8 @@ Some other Zigbee coordinator hardware may not support a firmware that is capabl
 ### Other supported but not recommended Zigbee radio adapters or modules
 
 - Silicon Labs EmberZNet based radios using legacy hardware using the EZSP protocol (via the [bellows](https://github.com/zigpy/bellows) library for zigpy)
+  - [Elelabs Zigbee USB Adapter](https://elelabs.com/products/elelabs-usb-adapter.html)/POPP ZB-Stick (Note! Not a must but recommend [upgrade the EmberZNet NCP application firmware](https://github.com/Elelabs/elelabs-zigbee-ezsp-utility))
+  - [Elelabs Zigbee Raspberry Pi Shield](https://elelabs.com/products/elelabs-zigbee-shield.html) (Note! Not a must but recommend [upgrade the EmberZNet NCP application firmware](https://github.com/Elelabs/elelabs-zigbee-ezsp-utility))
   - [ITead Sonoff ZBBridge](https://itead.cc/product/sonoff-zbbridge/) (Note! [WiFi-based bridges are not recommended for ZHA with EZSP radios](https://github.com/home-assistant/home-assistant.io/issues/17170). Also, this first has to be flashed with [Tasmota firmware and Silabs EmberZNet NCP EZSP UART Host firmware to use as Serial-to-IP adapter](https://www.digiblur.com/2020/07/how-to-use-sonoff-zigbee-bridge-with.html))
   - [Nortek GoControl QuickStick Combo Model HUSBZB-1 (Z-Wave & Zigbee Ember 3581 USB Adapter)](https://www.nortekcontrol.com/products/2gig/husbzb-1-gocontrol-quickstick-combo/) (Note! Not a must but recommend [upgrade the EmberZNet NCP application firmware](https://github.com/walthowd/husbzb-firmware))
   - [Bitron Video/Smabit BV AV2010/10 USB-Stick](https://manuals.smabit.eu/len/av2010_10.html) with Silicon Labs Ember 3587