Update README.md

README.md

@@ -84,14 +84,14 @@ Link for a terminal: [Printrun (ex Pronterface)](https://github.com/kliment/Prin
 
 This Marlin firmware also requires updating the screen firmware, follow these instructions :
 
-- Format microSD to FAT32 with allocation unit size to 4096
-- Extract screen firmware zip file and copy `DWIN_SET` folder to the root of the microSD card
-- Turn off printer
-- Remove the screen cover and insert the card into the microSD slot
-- Turn on the printer
-- Screen firmware installation begins immediately, you will see several scrolling lines
-- When the `END !` appears on the screen, turn off printer and remove the microSD card
-- Installation is complete, you can replace the screen cover and turn the printer back on
+- Format microSD to FAT32 with allocation unit size to 4096.
+- Extract screen firmware zip file and copy `DWIN_SET` folder to the root of the microSD card.
+- Turn off printer.
+- Remove the screen cover and insert the card into the microSD slot.
+- Turn on the printer.
+- Screen firmware installation begins immediately, you will see several scrolling lines.
+- When the `END !` appears on the screen, turn off printer and remove the microSD card.
+- Installation is complete, you can replace the screen cover and turn the printer back on.
 
 ![Capture d’écran 2021-10-01 à 18 59 01](https://user-images.githubusercontent.com/12702322/135659357-a9c7a9f5-7072-4fe7-be97-77d400bde2d0.jpg)