Skip to content

Latest commit

 

History

History
21 lines (18 loc) · 3.07 KB

vpn-gateway-add-gw-s2s-rm-portal-include.md

File metadata and controls

21 lines (18 loc) · 3.07 KB

  1. On the left side of the portal page, click + and type 'Virtual Network Gateway' in search. In Results, locate and click Virtual network gateway. At the bottom of the Virtual network gateway blade, click Create. This opens the Create virtual network gateway blade.

  2. On the Create virtual network gateway blade, fill in the values for your virtual network gateway.

    Create virtual network gateway blade fields

  3. Name: Name your gateway. This is not the same as naming a gateway subnet. It's the name of the gateway object you are creating.

  4. Gateway type: Select VPN. VPN gateways use the virtual network gateway type VPN.

  5. VPN type: Select the VPN type that is specified for your configuration. Most configurations require a Route-based VPN type.

  6. SKU: Select the gateway SKU from the dropdown. The SKUs listed in the dropdown depend on the VPN type you select.

  7. Location: You may need to scroll to see Location. Adjust the Location field to point to the location where your virtual network is located. If the location is not pointing to the region where your virtual network resides, the virtual network will not appear in the next step 'Choose a virtual network' dropdown.

  8. Virtual network: Choose the virtual network to which you want to add this gateway. Click Virtual network to open the Choose a virtual network blade. Select the VNet. If you don't see your VNet, make sure the Location field is pointing to the region in which your virtual network is located.

  9. Public IP address: This blade creates a public IP address object to which a public IP address will be dynamically assigned. Click Public IP address to open the Choose public IP address blade. Click +Create New to open the Create public IP address blade. Input a name for your public IP address. Click OK to save your changes to this blade.

    Create public IP

  10. Subscription: Verify that the correct subscription is selected.

  11. Resource group: This setting is determined by the Virtual Network that you select.

  12. Don't adjust the Location after you've specified the previous settings.

  13. Verify the settings. You can select Pin to dashboard at the bottom of the blade if you want your gateway to appear on the dashboard.

  14. Click Create to begin creating the gateway. The settings will be validated and you'll see the "Deploying Virtual network gateway" tile on the dashboard. Creating a gateway can take up to 45 minutes. You may need to refresh your portal page to see the completed status.

    Create gateway

  15. After the gateway is created, view the IP address that has been assigned to it by looking at the virtual network in the portal. The gateway will appear as a connected device. You can click the connected device (your virtual network gateway) to view more information.