on-chip-network-power-area.py

# Copyright (c) 2014 Mark D. Hill and David A. Wood
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.


from configparser import ConfigParser
import string, sys, subprocess, os

# Compile DSENT to generate the Python module and then import it.
# This script assumes it is executed from the gem5 root.
print("Attempting compilation")
from subprocess import call

src_dir = "ext/dsent"
build_dir = "build/ext/dsent"

if not os.path.exists(build_dir):
    os.makedirs(build_dir)
os.chdir(build_dir)

error = call(["cmake", f"../../../{src_dir}"])
if error:
    print("Failed to run cmake")
    exit(-1)

error = call(["make"])
if error:
    print("Failed to run make")
    exit(-1)

print("Compiled dsent")
os.chdir("../../../")
sys.path.append("build/ext/dsent")
import dsent


# Parse gem5 config.ini file for the configuration parameters related to
# the on-chip network.
def parseConfig(config_file):
    config = ConfigParser()
    if not config.read(config_file):
        print(("ERROR: config file '", config_file, "' not found"))
        sys.exit(1)

    if not config.has_section("system.ruby.network"):
        print(("ERROR: Ruby network not found in '", config_file))
        sys.exit(1)

    if config.get("system.ruby.network", "type") != "GarnetNetwork_d":
        print(("ERROR: Garnet network not used in '", config_file))
        sys.exit(1)

    number_of_virtual_networks = config.getint(
        "system.ruby.network", "number_of_virtual_networks"
    )
    vcs_per_vnet = config.getint("system.ruby.network", "vcs_per_vnet")

    buffers_per_data_vc = config.getint(
        "system.ruby.network", "buffers_per_data_vc"
    )
    buffers_per_control_vc = config.getint(
        "system.ruby.network", "buffers_per_ctrl_vc"
    )

    ni_flit_size_bits = 8 * config.getint(
        "system.ruby.network", "ni_flit_size"
    )

    routers = config.get("system.ruby.network", "routers").split()
    int_links = config.get("system.ruby.network", "int_links").split()
    ext_links = config.get("system.ruby.network", "ext_links").split()

    return (
        config,
        number_of_virtual_networks,
        vcs_per_vnet,
        buffers_per_data_vc,
        buffers_per_control_vc,
        ni_flit_size_bits,
        routers,
        int_links,
        ext_links,
    )


def getClock(obj, config):
    if config.get(obj, "type") == "SrcClockDomain":
        return config.getint(obj, "clock")

    if config.get(obj, "type") == "DerivedClockDomain":
        source = config.get(obj, "clk_domain")
        divider = config.getint(obj, "clk_divider")
        return getClock(source, config) / divider

    source = config.get(obj, "clk_domain")
    return getClock(source, config)


## Compute the power consumed by the given router
def computeRouterPowerAndArea(
    router,
    stats_file,
    config,
    int_links,
    ext_links,
    number_of_virtual_networks,
    vcs_per_vnet,
    buffers_per_data_vc,
    buffers_per_control_vc,
    ni_flit_size_bits,
):
    frequency = getClock(router, config)
    num_ports = 0

    for int_link in int_links:
        if (
            config.get(int_link, "node_a") == router
            or config.get(int_link, "node_b") == router
        ):
            num_ports += 1

    for ext_link in ext_links:
        if config.get(ext_link, "int_node") == router:
            num_ports += 1

    power = dsent.computeRouterPowerAndArea(
        frequency,
        num_ports,
        num_ports,
        number_of_virtual_networks,
        vcs_per_vnet,
        buffers_per_data_vc,
        ni_flit_size_bits,
    )

    print(f"{router} Power: ", power)


## Compute the power consumed by the given link
def computeLinkPower(link, stats_file, config, sim_seconds):
    frequency = getClock(link + ".nls0", config)
    power = dsent.computeLinkPower(frequency)
    print(f"{link}.nls0 Power: ", power)

    frequency = getClock(link + ".nls1", config)
    power = dsent.computeLinkPower(frequency)
    print(f"{link}.nls1 Power: ", power)


def parseStats(
    stats_file,
    config,
    router_config_file,
    link_config_file,
    routers,
    int_links,
    ext_links,
    number_of_virtual_networks,
    vcs_per_vnet,
    buffers_per_data_vc,
    buffers_per_control_vc,
    ni_flit_size_bits,
):
    # Open the stats.txt file and parse it to for the required numbers
    # and the number of routers.
    try:
        stats_handle = open(stats_file)
        stats_handle.close()
    except OSError:
        print("Failed to open ", stats_file, " for reading")
        exit(-1)

    # Now parse the stats
    pattern = "sim_seconds"
    lines = string.split(
        subprocess.check_output(["grep", pattern, stats_file]), "\n", -1
    )
    assert len(lines) >= 1

    ## Assume that the first line is the one required
    [l1, l2, l3] = lines[0].partition(" ")
    l4 = l3.strip().partition(" ")
    simulation_length_in_seconds = float(l4[0])

    # Initialize DSENT with a configuration file
    dsent.initialize(router_config_file)

    # Compute the power consumed by the routers
    for router in routers:
        computeRouterPowerAndArea(
            router,
            stats_file,
            config,
            int_links,
            ext_links,
            number_of_virtual_networks,
            vcs_per_vnet,
            buffers_per_data_vc,
            buffers_per_control_vc,
            ni_flit_size_bits,
        )

    # Finalize DSENT
    dsent.finalize()

    # Initialize DSENT with a configuration file
    dsent.initialize(link_config_file)

    # Compute the power consumed by the links
    for link in int_links:
        computeLinkPower(
            link, stats_file, config, simulation_length_in_seconds
        )
    for link in ext_links:
        computeLinkPower(
            link, stats_file, config, simulation_length_in_seconds
        )

    # Finalize DSENT
    dsent.finalize()


# This script parses the config.ini and the stats.txt from a run and
# generates the power and the area of the on-chip network using DSENT
def main():
    if len(sys.argv) != 5:
        print(
            "Usage: ",
            sys.argv[0],
            " <gem5 root directory> "
            "<simulation directory> <router config file> <link config file>",
        )
        exit(-1)

    print(
        "WARNING: configuration files for DSENT and McPAT are separate. "
        "Changes made to one are not reflected in the other."
    )

    (
        config,
        number_of_virtual_networks,
        vcs_per_vnet,
        buffers_per_data_vc,
        buffers_per_control_vc,
        ni_flit_size_bits,
        routers,
        int_links,
        ext_links,
    ) = parseConfig(f"{sys.argv[1]}/{sys.argv[2]}/config.ini")

    parseStats(
        f"{sys.argv[1]}/{sys.argv[2]}/stats.txt",
        config,
        sys.argv[3],
        sys.argv[4],
        routers,
        int_links,
        ext_links,
        number_of_virtual_networks,
        vcs_per_vnet,
        buffers_per_data_vc,
        buffers_per_control_vc,
        ni_flit_size_bits,
    )


if __name__ == "__main__":
    main()