Import bzip2-1.0.6 (matching svn r89086)

Author: zware

CHANGES

@@ -0,0 +1,327 @@
+ ------------------------------------------------------------------
+ This file is part of bzip2/libbzip2, a program and library for
+ lossless, block-sorting data compression.
+
+ bzip2/libbzip2 version 1.0.6 of 6 September 2010
+ Copyright (C) 1996-2010 Julian Seward <[email protected]>
+
+ Please read the WARNING, DISCLAIMER and PATENTS sections in the 
+ README file.
+
+ This program is released under the terms of the license contained
+ in the file LICENSE.
+ ------------------------------------------------------------------
+
+
+0.9.0
+~~~~~
+First version.
+
+
+0.9.0a
+~~~~~~
+Removed 'ranlib' from Makefile, since most modern Unix-es 
+don't need it, or even know about it.
+
+
+0.9.0b
+~~~~~~
+Fixed a problem with error reporting in bzip2.c.  This does not effect
+the library in any way.  Problem is: versions 0.9.0 and 0.9.0a (of the
+program proper) compress and decompress correctly, but give misleading
+error messages (internal panics) when an I/O error occurs, instead of
+reporting the problem correctly.  This shouldn't give any data loss
+(as far as I can see), but is confusing.
+
+Made the inline declarations disappear for non-GCC compilers.
+
+
+0.9.0c
+~~~~~~
+Fixed some problems in the library pertaining to some boundary cases.
+This makes the library behave more correctly in those situations.  The
+fixes apply only to features (calls and parameters) not used by
+bzip2.c, so the non-fixedness of them in previous versions has no
+effect on reliability of bzip2.c.
+
+In bzlib.c:
+   * made zero-length BZ_FLUSH work correctly in bzCompress().
+   * fixed bzWrite/bzRead to ignore zero-length requests.
+   * fixed bzread to correctly handle read requests after EOF.
+   * wrong parameter order in call to bzDecompressInit in
+     bzBuffToBuffDecompress.  Fixed.
+
+In compress.c:
+   * changed setting of nGroups in sendMTFValues() so as to 
+     do a bit better on small files.  This _does_ effect
+     bzip2.c.
+
+
+0.9.5a
+~~~~~~
+Major change: add a fallback sorting algorithm (blocksort.c)
+to give reasonable behaviour even for very repetitive inputs.
+Nuked --repetitive-best and --repetitive-fast since they are
+no longer useful.
+
+Minor changes: mostly a whole bunch of small changes/
+bugfixes in the driver (bzip2.c).  Changes pertaining to the
+user interface are:
+
+   allow decompression of symlink'd files to stdout
+   decompress/test files even without .bz2 extension
+   give more accurate error messages for I/O errors
+   when compressing/decompressing to stdout, don't catch control-C
+   read flags from BZIP2 and BZIP environment variables
+   decline to break hard links to a file unless forced with -f
+   allow -c flag even with no filenames
+   preserve file ownerships as far as possible
+   make -s -1 give the expected block size (100k)
+   add a flag -q --quiet to suppress nonessential warnings
+   stop decoding flags after --, so files beginning in - can be handled
+   resolved inconsistent naming: bzcat or bz2cat ?
+   bzip2 --help now returns 0
+
+Programming-level changes are:
+
+   fixed syntax error in GET_LL4 for Borland C++ 5.02
+   let bzBuffToBuffDecompress return BZ_DATA_ERROR{_MAGIC}
+   fix overshoot of mode-string end in bzopen_or_bzdopen
+   wrapped bzlib.h in #ifdef __cplusplus ... extern "C" { ... }
+   close file handles under all error conditions
+   added minor mods so it compiles with DJGPP out of the box
+   fixed Makefile so it doesn't give problems with BSD make
+   fix uninitialised memory reads in dlltest.c
+
+0.9.5b
+~~~~~~
+Open stdin/stdout in binary mode for DJGPP.
+
+0.9.5c
+~~~~~~
+Changed BZ_N_OVERSHOOT to be ... + 2 instead of ... + 1.  The + 1
+version could cause the sorted order to be wrong in some extremely
+obscure cases.  Also changed setting of quadrant in blocksort.c.
+
+0.9.5d
+~~~~~~
+The only functional change is to make bzlibVersion() in the library
+return the correct string.  This has no effect whatsoever on the
+functioning of the bzip2 program or library.  Added a couple of casts
+so the library compiles without warnings at level 3 in MS Visual
+Studio 6.0.  Included a Y2K statement in the file Y2K_INFO.  All other
+changes are minor documentation changes.
+
+1.0
+~~~
+Several minor bugfixes and enhancements:
+
+* Large file support.  The library uses 64-bit counters to
+  count the volume of data passing through it.  bzip2.c 
+  is now compiled with -D_FILE_OFFSET_BITS=64 to get large
+  file support from the C library.  -v correctly prints out
+  file sizes greater than 4 gigabytes.  All these changes have
+  been made without assuming a 64-bit platform or a C compiler
+  which supports 64-bit ints, so, except for the C library
+  aspect, they are fully portable.
+
+* Decompression robustness.  The library/program should be
+  robust to any corruption of compressed data, detecting and
+  handling _all_ corruption, instead of merely relying on
+  the CRCs.  What this means is that the program should 
+  never crash, given corrupted data, and the library should
+  always return BZ_DATA_ERROR.
+
+* Fixed an obscure race-condition bug only ever observed on
+  Solaris, in which, if you were very unlucky and issued
+  control-C at exactly the wrong time, both input and output
+  files would be deleted.
+
+* Don't run out of file handles on test/decompression when
+  large numbers of files have invalid magic numbers.
+
+* Avoid library namespace pollution.  Prefix all exported 
+  symbols with BZ2_.
+
+* Minor sorting enhancements from my DCC2000 paper.
+
+* Advance the version number to 1.0, so as to counteract the
+  (false-in-this-case) impression some people have that programs 
+  with version numbers less than 1.0 are in some way, experimental,
+  pre-release versions.
+
+* Create an initial Makefile-libbz2_so to build a shared library.
+  Yes, I know I should really use libtool et al ...
+
+* Make the program exit with 2 instead of 0 when decompression
+  fails due to a bad magic number (ie, an invalid bzip2 header).
+  Also exit with 1 (as the manual claims :-) whenever a diagnostic
+  message would have been printed AND the corresponding operation 
+  is aborted, for example
+     bzip2: Output file xx already exists.
+  When a diagnostic message is printed but the operation is not 
+  aborted, for example
+     bzip2: Can't guess original name for wurble -- using wurble.out
+  then the exit value 0 is returned, unless some other problem is
+  also detected.
+
+  I think it corresponds more closely to what the manual claims now.
+
+
+1.0.1
+~~~~~
+* Modified dlltest.c so it uses the new BZ2_ naming scheme.
+* Modified makefile-msc to fix minor build probs on Win2k.
+* Updated README.COMPILATION.PROBLEMS.
+
+There are no functionality changes or bug fixes relative to version
+1.0.0.  This is just a documentation update + a fix for minor Win32
+build problems.  For almost everyone, upgrading from 1.0.0 to 1.0.1 is
+utterly pointless.  Don't bother.
+
+
+1.0.2
+~~~~~
+A bug fix release, addressing various minor issues which have appeared
+in the 18 or so months since 1.0.1 was released.  Most of the fixes
+are to do with file-handling or documentation bugs.  To the best of my
+knowledge, there have been no data-loss-causing bugs reported in the
+compression/decompression engine of 1.0.0 or 1.0.1.
+
+Note that this release does not improve the rather crude build system
+for Unix platforms.  The general plan here is to autoconfiscate/
+libtoolise 1.0.2 soon after release, and release the result as 1.1.0
+or perhaps 1.2.0.  That, however, is still just a plan at this point.
+
+Here are the changes in 1.0.2.  Bug-reporters and/or patch-senders in
+parentheses.
+
+* Fix an infinite segfault loop in 1.0.1 when a directory is
+  encountered in -f (force) mode.
+     (Trond Eivind Glomsrod, Nicholas Nethercote, Volker Schmidt)
+
+* Avoid double fclose() of output file on certain I/O error paths.
+     (Solar Designer)
+
+* Don't fail with internal error 1007 when fed a long stream (> 48MB)
+  of byte 251.  Also print useful message suggesting that 1007s may be
+  caused by bad memory.
+     (noticed by Juan Pedro Vallejo, fixed by me)
+
+* Fix uninitialised variable silly bug in demo prog dlltest.c.
+     (Jorj Bauer)
+
+* Remove 512-MB limitation on recovered file size for bzip2recover
+  on selected platforms which support 64-bit ints.  At the moment
+  all GCC supported platforms, and Win32.
+     (me, Alson van der Meulen)
+
+* Hard-code header byte values, to give correct operation on platforms
+  using EBCDIC as their native character set (IBM's OS/390).
+     (Leland Lucius)
+
+* Copy file access times correctly.
+     (Marty Leisner)
+
+* Add distclean and check targets to Makefile.
+     (Michael Carmack)
+
+* Parameterise use of ar and ranlib in Makefile.  Also add $(LDFLAGS).
+     (Rich Ireland, Bo Thorsen)
+
+* Pass -p (create parent dirs as needed) to mkdir during make install.
+     (Jeremy Fusco)
+
+* Dereference symlinks when copying file permissions in -f mode.
+     (Volker Schmidt)
+
+* Majorly simplify implementation of uInt64_qrm10.
+     (Bo Lindbergh)
+
+* Check the input file still exists before deleting the output one,
+  when aborting in cleanUpAndFail().
+     (Joerg Prante, Robert Linden, Matthias Krings)
+
+Also a bunch of patches courtesy of Philippe Troin, the Debian maintainer
+of bzip2:
+
+* Wrapper scripts (with manpages): bzdiff, bzgrep, bzmore.
+
+* Spelling changes and minor enhancements in bzip2.1.
+
+* Avoid race condition between creating the output file and setting its
+  interim permissions safely, by using fopen_output_safely().
+  No changes to bzip2recover since there is no issue with file
+  permissions there.
+
+* do not print senseless report with -v when compressing an empty
+  file.
+
+* bzcat -f works on non-bzip2 files.
+
+* do not try to escape shell meta-characters on unix (the shell takes
+  care of these).
+
+* added --fast and --best aliases for -1 -9 for gzip compatibility.
+
+
+1.0.3 (15 Feb 05)
+~~~~~~~~~~~~~~~~~
+Fixes some minor bugs since the last version, 1.0.2.
+
+* Further robustification against corrupted compressed data.
+  There are currently no known bitstreams which can cause the
+  decompressor to crash, loop or access memory which does not
+  belong to it.  If you are using bzip2 or the library to 
+  decompress bitstreams from untrusted sources, an upgrade
+  to 1.0.3 is recommended.  This fixes CAN-2005-1260.
+
+* The documentation has been converted to XML, from which html
+  and pdf can be derived.
+
+* Various minor bugs in the documentation have been fixed.
+
+* Fixes for various compilation warnings with newer versions of
+  gcc, and on 64-bit platforms.
+
+* The BZ_NO_STDIO cpp symbol was not properly observed in 1.0.2.
+  This has been fixed.
+
+
+1.0.4 (20 Dec 06)
+~~~~~~~~~~~~~~~~~
+Fixes some minor bugs since the last version, 1.0.3.
+
+* Fix file permissions race problem (CAN-2005-0953).
+
+* Avoid possible segfault in BZ2_bzclose.  From Coverity's NetBSD
+  scan.
+
+* 'const'/prototype cleanups in the C code.
+
+* Change default install location to /usr/local, and handle multiple
+  'make install's without error.
+
+* Sanitise file names more carefully in bzgrep.  Fixes CAN-2005-0758
+  to the extent that applies to bzgrep.
+
+* Use 'mktemp' rather than 'tempfile' in bzdiff.
+
+* Tighten up a couple of assertions in blocksort.c following automated
+  analysis.
+
+* Fix minor doc/comment bugs.
+
+
+1.0.5 (10 Dec 07)
+~~~~~~~~~~~~~~~~~
+Security fix only.  Fixes CERT-FI 20469 as it applies to bzip2.
+
+
+1.0.6 (6 Sept 10)
+~~~~~~~~~~~~~~~~~
+
+* Security fix for CVE-2010-0405.  This was reported by Mikolaj
+  Izdebski.
+
+* Make the documentation build on Ubuntu 10.04

LICENSE

@@ -0,0 +1,42 @@
+
+--------------------------------------------------------------------------
+
+This program, "bzip2", the associated library "libbzip2", and all
+documentation, are copyright (C) 1996-2010 Julian R Seward.  All
+rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+
+1. Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+2. The origin of this software must not be misrepresented; you must 
+   not claim that you wrote the original software.  If you use this 
+   software in a product, an acknowledgment in the product 
+   documentation would be appreciated but is not required.
+
+3. Altered source versions must be plainly marked as such, and must
+   not be misrepresented as being the original software.
+
+4. The name of the author may not be used to endorse or promote 
+   products derived from this software without specific prior written 
+   permission.
+
+THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
+OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
+GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Julian Seward, [email protected]
+bzip2/libbzip2 version 1.0.6 of 6 September 2010
+
+--------------------------------------------------------------------------