app.config.php

<?php
/**
 * phpVMS - Virtual Airline Administration Software
 * Copyright (c) 2008 Nabeel Shahzad
 * For more information, visit www.phpvms.net
 *	Forums: http://www.phpvms.net/forum
 *	Documentation: http://www.phpvms.net/docs
 *
 * phpVMS is licenced under the following license:
 *   Creative Commons Attribution Non-commercial Share Alike (by-nc-sa)
 *   View license.txt in the root, or visit http://creativecommons.org/licenses/by-nc-sa/3.0/
 *
 * @author Nabeel Shahzad
 * @copyright Copyright (c) 2008, Nabeel Shahzad
 * @link http://www.phpvms.net
 * @license http://creativecommons.org/licenses/by-nc-sa/3.0/
 */

/**
 * DO NOT MODIFY THESE SETTINGS HERE!!
 * They will get over-ridden in an update. These are just defaults 
 * To change, copy-paste and change the line/option/setting into your
 *  local.config.php file
 *
 * Most of these are in your local.config.php already
 * 
 * View the docs for details about these settings
 */

define('IN_PHPVMS', true);

# Debug mode is off by default
Config::Set('DEBUG_MODE', false);
Config::Set('DEBUG_LEVEL', 1); // 1 logs query errors, 2 logs all queries
Config::Set('ERROR_LEVEL', E_ALL ^ E_NOTICE);

# Page encoding options
Config::Set('PAGE_ENCODING', 'UTF-8');
Config::Set('DB_CHARSET_NAME', 'utf8');

# Maintenance mode - this disables the site to non-admins
Config::Set('MAINTENANCE_MODE', false);
Config::Set('MAINTENANCE_MESSAGE', 'We are currently down for maintenance, please check back soon.');

# This is your airline's twitter account, if it exists
Config::Set('TWITTER_AIRLINE_ACCOUNT', '');
Config::Set('TWITTER_ENABLE_PUSH', false);
Config::Set('TWITTER_CONSUMER_KEY', '');
Config::Set('TWITTER_CONSUMER_SECRET', '');
Config::Set('TWITTER_OAUTH_TOKEN', '');
Config::Set('TWITTER_OAUTH_SECRET', '');

# See more details about these in the docs
Config::Set('PAGE_EXT', '.htm');	# .htm is fine. You can still run PHP
Config::Set('PILOTID_OFFSET', 0);	# What # to start pilot ID's from
Config::Set('PILOTID_LENGTH', 4);	# Length of the Pilot ID
Config::Set('UNITS', 'nm');			# Your units: nm, mi or km
Config::Set('LOAD_FACTOR', '82');	# %age load factor 
Config::Set('CARGO_UNITS', 'lbs');
Config::Set('DEFAULT_MAX_CARGO_LOAD', 10000);
Config::Set('DEFAULT_MAX_PAX_LOAD', 250);

# Number of routes to show in the route map
Config::Set('ROUTE_MAP_SHOW_NUMBER', 25);

# After how long to mark a pilot inactive, in days
Config::Set('PILOT_AUTO_RETIRE', true);
Config::Set('PILOT_INACTIVE_TIME', 90);

# Automatically confirm pilots?
Config::Set('PILOT_AUTO_CONFIRM', false);

# Automatically calculate ranks?
Config::Set('RANKS_AUTOCALCULATE', true);

# Schedules - ignore the day of week active?
Config::Set('CHECK_SCHEDULE_DAY_OF_WEEK', true);

# Schedules - only show schedules from the last filed PIREP
Config::Set('SCHEDULES_ONLY_LAST_PIREP', false);

# For how many hours a pilot can edit their submitted PIREP (custom fields only)
Config::Set('PIREP_CUSTOM_FIELD_EDIT', '48');

# The time to wait to be allowed to submit identical PIREPS
Config::Set('PIREP_CHECK_DUPLICATE', true);
Config::Set('PIREP_TIME_CHECK', '1'); #  Minutes, to wait in between duplicate submits

# Whether to ignore any user-inputted load, and always calculate it
Config::Set('PIREP_OVERRIDE_LOAD', false);

/* What to order schedules by. Use s.[column_name] [ASC/DESC],
	with the column name being from the schedules table */
Config::Set('SCHEDULES_ORDER_BY', 's.flightnum ASC');

/* For PIREPS_ORDER_BY use p.[column_name] [ASC/DESC] */
Config::Set('PIREPS_ORDER_BY', 'p.submitdate DESC');

# If someone places a bid, whether to disable that or not
Config::Set('DISABLE_SCHED_ON_BID', true);
Config::Set('DISABLE_BIDS_ON_BID', false);

# Whether to close any bids after a certain amount of time
Config::Set('CLOSE_BIDS_AFTER_EXPIRE', false);
Config::Set('BID_EXPIRE_TIME', '48'); # How many hours to hold bids for

# If you want to count transfer hours in rank calculations
Config::Set('TRANSFER_HOURS_IN_RANKS', false);

# Pilot pilots to only fly aircraft they're ranked to
Config::Set('RESTRICT_AIRCRAFT_RANKS', true);

# The StatsData::UserOnline() function - how many minutes to check
Config::Set('USERS_ONLINE_TIME', 20);

# Google Map Options
Config::Set('MAP_WIDTH', '800px');
Config::Set('MAP_HEIGHT', '600px');
Config::Set('MAP_TYPE', 'G_PHYSICAL_MAP');
Config::Set('MAP_LINE_COLOR', '#ff0000');
Config::Set('MAP_CENTER_LAT', '45.484400');
Config::Set('MAP_CENTER_LNG', '-62.334821');
Config::Set('MAP_ZOOM_LEVEL', 12);

# ACARS options
#  Minutes, flights to show on the ACARS
#  Default is 720 minutes (12 hours)
Config::Set('ACARS_LIVE_TIME', 720); 
Config::Set('ACARS_DEBUG', false);

/*
  This is the unit of money. For non-dollars, use :
	Dollars ($), enter "$"
	Euro (�), enter "&#8364;"
	Yen (�), enter "&yen;"
	Pounds (�), enter "&pound;"
	
  For example, to set EUROS:
	Config::Set('MONEY_UNIT', '&#8364;');
 */
 
Config::Set('MONEY_UNIT', '$');

/*
 To change the money format, look at:
  http://us3.php.net/money_format
 
 However, I do not recommend changing this
 */
 
Config::Set('MONEY_FORMAT', '%(#10n');


# Fuel info
/* Default fuel price, for airports that don't have
	And the surcharge percentage. View the docs
	for more details about these
*/ 
Config::Set('FUEL_GET_LIVE_PRICE', true);
Config::Set('FUEL_DEFAULT_PRICE', '5.10');
Config::Set('FUEL_SURCHARGE', '5');

# Units settings
#	These are global, also used for FSPAX
Config::Set('WeightUnit', '1');		# 0=Kg 1=lbs
Config::Set('DistanceUnit', '2');   # 0=KM 1= Miles 2=NMiles
Config::Set('SpeedUnit', '1');		# 0=Km/H 1=Kts
Config::Set('AltUnit', '1');		# 0=Meter 1=Feet 
Config::Set('LiquidUnit', '3');		# 0=liter 1=gal 2=kg 3=lbs
Config::Set('WelcomeMessage', 'phpVMS/FSPAX ACARS'); # Welcome Message
Config::Set('LIQUID_UNIT_NAMES', array('liter','gal','kg', 'lbs'));

/* FSFK Settings
	Your FTP Server, and path to the lib/images folder (from where the FTP connects from), IE
	ftp://phpvms.net/phpvms/lib/fsfk or ftp://phpvms.net/public_html/phpvms/lib/fsfk
	
	You want the path from when you connect to the FTP down to where the /lib/fsfk folder is 
    
    SECURITY NOTE! Make a separate FTP user and password ONLY for this, with access only to this folder
    
*/
Config::Set('FSFK_FTP_SERVER', '');
Config::Set('FSFK_FTP_PORT', '21');
Config::Set('FSFK_FTP_USER', '');
Config::Set('FSFK_FTP_PASS', '');
Config::Set('FSFK_FTP_PASSIVE_MODE', 'TRUE');
Config::Set('FSFK_IMAGE_PATH', '/lib/fsfk'); // web path from SITE_ROOT

# Options for the signature that's generated 
Config::Set('SIGNATURE_TEXT_COLOR', '#000');
Config::Set('SIGNATURE_USE_CUSTOM_FONT', true);
Config::Set('SIGNATURE_FONT_PATH', SITE_ROOT.'/lib/fonts/tahoma.ttf');
Config::Set('SIGNATURE_FONT_SIZE', '10');
Config::Set('SIGNATURE_X_OFFSET', '10');
Config::Set('SIGNATURE_Y_OFFSET', '17');
Config::Set('SIGNATURE_FONT_PADDING', 4); 
Config::Set('SIGNATURE_SHOW_EARNINGS', true);
Config::Set('SIGNATURE_SHOW_RANK_IMAGE', true);
Config::Set('SIGNATURE_SHOW_COPYRIGHT', true);

# Avatar information
Config::Set('AVATAR_FILE_SIZE', 50000);	# Maximum file-size they can upload
Config::Set('AVATAR_MAX_WIDTH', 80);	# Resized width
Config::Set('AVATAR_MAX_HEIGHT', 80);	# Resized height

# Cookie information
Config::Set('SESSION_LOGIN_TIME', (60*60*24*30)); # Expire after 30 days, in seconds
Config::Set('SESSION_GUEST_EXPIRE', '30'); # Clear guest sessions 30 minutes
//Config::Set('SESSION_COOKIE_NAME', 'VMS_AUTH_COOKIE');

# Email Settings
Config::Set('EMAIL_FROM_NAME', '');
Config::Set('EMAIL_FROM_ADDRESS', '');

Config::Set('EMAIL_USE_SMTP', false);
# Add multiple SMTP servers by separating them with ;
Config::Set('EMAIL_SMTP_SERVERS', '');
Config::Set('EMAIL_SMTP_PORT', '25');
Config::Set('EMAIL_SMTP_USE_AUTH', false);
Config::Set('EMAIL_SMTP_SECURE', ''); # must be "ssl" for Google Apps
Config::Set('EMAIL_SMTP_USER', '');
Config::Set('EMAIL_SMTP_PASS', '');

# Set specific email addresses to send notifications to
Config::Set('EMAIL_NEW_REGISTRATIONS', '');
Config::Set('EMAIL_NEW_PIREP', '');

# Whether to send an email or not
Config::Set('EMAIL_SEND_PIREP', true);

# This is email to specifically send email sent error to, such
# as failure notices with an invalid email or something
# If blank, it'll default to the "from" email that's specified
Config::Set('EMAIL_RETURN_PATH', '');

/* Can be 'geonames' or 'phpvms'.
	Geonames will use the geonames.org server to look up the airport info
	phpvms will use the phpVMS API server
*/

Config::Set('AIRPORT_LOOKUP_SERVER', 'phpvms'); 
Config::Set('PHPVMS_API_SERVER', 'http://api.phpvms.net');
Config::Set('PHPVMS_NEWS_FEED', 'http://feeds.feedburner.com/phpvms');
Config::Set('VACENTRAL_NEWS_FEED', 'http://feeds.feedburner.com/vacentral');
Config::Set('GEONAME_API_SERVER', 'http://ws.geonames.org');

/* Keys for recaptcha, you can change these if you want to your own but it's
	a global key so it should just work */
Config::Set('RECAPTCHA_PUBLIC_KEY', '6LcklAsAAAAAAJqmghmMPOACeJrAxW3sJulSboxx');
Config::Set('RECAPTCHA_PRIVATE_KEY', '6LcklAsAAAAAAMeQy5ZBoDu8JOMTP-UL7ek1GedO');

/*	Whether you have the /admin/maintenance.php script added into cron.
	If you do, set this to true. This saves many DB calls since phpVMS will
	have to 'fake' a cron-job
	*/
Config::Set('USE_CRON', false);

Config::Set('CHECK_RELEASE_VERSION', true);
Config::Set('CHECK_BETA_VERSION', false);
Config::Set('URL_REWRITE', false);

/* Days of the Week
	The compacted view, and the full text
 */
Config::Set('DAYS_COMPACT',  array('Su', 'M', 'T', 'W', 'Th', 'F', 'S', 'Su'));

Config::Set('DAYS_LONG', 
	array('Sunday',
		  'Monday',
		  'Tuesday',
		  'Wednesday',
		  'Thursday',
		  'Friday',
		  'Saturday',
		  'Sunday'
	)
);

Config::Set('SITE_LANGUAGE', 'en');
Config::Set('ADMIN_SKIN', 'layout');


/**
 * *******************************************************
 * 
 * 
 * 
 * 
 * 
 * 
 * Advanced options, don't edit unless you
 * know what you're doing!!
 * 
 * Actually, don't change them, at all. Please.
 * For your sake. And mine. :)
 * 
 * 
 * 
 * 
 * 
 * 
 * 
 * 
 * 
 * 
 * 
 * 
 * 
 * 
 * 
 * 
 * 
 * 
 * 
 * 
 * 
 */

$revision = trim(file_get_contents(CORE_PATH.'/version'));
define('PHPVMS_VERSION', $revision);

Config::Set('TEMPLATE_USE_CACHE', false);
Config::Set('TEMPLATE_CACHE_EXPIRE', '24');
Config::Set('DBASE_USE_CACHE', false);
Config::Set('CACHE_PATH', SITE_ROOT . '/core/cache');
Config::Set('TPL_EXTENSION', '.tpl');
Config::Set('BASE_TEMPLATE_PATH', SITE_ROOT.'/core/templates');

if(defined('ADMIN_PANEL') && ADMIN_PANEL === true) {	
	Template::SetTemplatePath(SITE_ROOT.'/admin/templates');
	
	define('CODON_MODULES_PATH', SITE_ROOT.'/admin/modules');
	define('CODON_DEFAULT_MODULE', 'Dashboard');
} else {	
	Template::SetTemplatePath(Config::Get('BASE_TEMPLATE_PATH'));
	
	define('CODON_MODULES_PATH', SITE_ROOT.'/core/modules');
	define('CODON_DEFAULT_MODULE', 'Frontpage');
}

/* Cache settings */
$cache_settings = array(
	'active' => false,
	'engine' => 'file',			/* "file" or "apc" */
	'location' => CACHE_PATH,	/* For the "file" engine type */
	'prefix' => 'phpvms_',		/* Specify a prefix for any entries */
	'profiles' => array(
		'default' => array(
			'duration' => '+10 minutes',
		),
		
		'short' => array(
			'duration' => '+3 minutes',
		),
		
		'15minute' => array(
			'duration' => '+15 minutes',
		),
		
		'medium' => array(
			'duration' => '+1 hour',
		),
        
        'medium_well' => array(
			'duration' => '+3 hour',
		),
		
		'long' => array(
			'duration' => '+6 hours'
		),
	)
);

Config::Set('CACHE_KEY_LIST', array(
	'all_airline_active',
	'all_airlines',
	'start_date',
	'months_since_start',
	'years_since_start',
	'stats_aircraft_usage',
	'all_settings',
	'total_flights',
	'top_routes',
	'users_online',
	'guests_online',
	'pilot_count',
	'total_pax_carried',
	'flights_today',
	'fuel_burned',
	'miles_flown',
	'aircraft_in_fleet',
	'total_news_items',
	'total_schedules',
	'all_groups',
	'all_ranks',
	)
);

Config::Set('TABLE_LIST', array(
	'acarsdata', 
	'adminlog', 
	'aircraft', 
	'airlines', 
	'airports', 
	'awards', 
	'awardsgranted',
	'bids',
	'customfields',
	'downloads', 
	'expenselog', 
	'expenses', 
	'fieldvalues', 
	'financedata', 
	'fuelprices', 
	'groupmembers', 
	'groups', 
	'navdata', 
	'news', 
	'pages', 
	'pilots', 
	'pirepcomments', 
	'pirepfields', 
	'pireps', 
	'pirepvalues', 
	'ranks', 
	'schedules', 
	'sessions', 
	'settings', 
	'updates' 
	)
);

/* VACentral */
Config::Set('VACENTRAL_ENABLED', false);
Config::Set('VACENTRAL_DEBUG_MODE', false);
Config::Set('VACENTRAL_DEBUG_DETAIL', 0);
Config::Set('VACENTRAL_API_SERVER', 'http://api.phpvms.net');
Config::Set('VACENTRAL_API_KEY', '');
Config::Set('VACENTRAL_DATA_FORMAT', 'json');

/**
 * Constants
 *	Do not modify these! All sorts of weird shit can happen
 */ 
# Set the type of flights we have
Config::Set(
	'FLIGHT_TYPES', array(	
		'P'=>'Passenger',
		'C'=>'Cargo',
		'H'=>'Charter'
	)
);
			
# Set the types of expenses we have
Config::Set(
	'EXPENSE_TYPES', array( 
		'M'=>'Monthly',
		'F'=>'Per Flight',
		'P'=>'Percent (month)',
		'G'=>'Percent (per flight)'
	)
);


/*  These are pilot statuses which can be selected in
    the admin panel. I would be weary of changing these!
    
    Though you can safely change the name or messages or tweak
    the additional settings provided
 */
Config::Set('PILOT_STATUS_TYPES', array(

    /* DO NOT CHANGE THIS ACTIVE NUMBER OR STATUS OR THINGS WILL BREAK!!! */
    0 => array( 
        'name' => 'Active',             # The title to show in the dropdown
        'message' => '',                # Message to show if they can't login (below is false)
        'default' => true,              # Should this be their default status?
        'canlogin' => true,             # Are they allowed to log in
        'active' => true,               # Are they an active pilot?
        'autoretire' => false,          # Use this status for the auto-retire functionality
        'group_add' => array(           # ID or name of the group this user is added to with this status
            'Active Pilots', 
        ),      
        'group_remove' => array(        # ID or name of the groups this user is removed from with this status
            'Inactive Pilots', 
        ),   
    ),
    
    /* DO NOT CHANGE THIS INACTIVE NUMBER OR STATUS OR THINGS WILL BREAK!!! */
    1 => array(
        'name' => 'Inactive',
        'message' => 'Your account was marked inactive',
        'default' => false, 
        'canlogin' => false,
        'active' => false,
        'autoretire' => false,
        'group_add' => array(          
            'Inactive Pilots',  
        ),      
        'group_remove' => array(       
            'Active Pilots',
        ),
    ),
    
    2 => array(
        'name' => 'Banned',
        'message' => 'Your account is banned, please contact an admin!',
        'default' => false, 
        'canlogin' => false,
        'active' => false,
        'autoretire' => false,
        'group_add' => array(
            'Inactive Pilots', 
        ),  
        'group_remove' => array(
            'Active Pilots', 
        ),
    ),
    
    3 => array(
        'name' => 'On Leave',
        'message' => 'You have been marked as on leave',
        'default' => false, 
        'canlogin' => true,
        'active' => false,
        'autoretire' => true,
        'group_add' => array(
            'Inactive Pilots', 
        ),  
        'group_remove' => array(
            'Active Pilots', 
        ),
    ),
));

define('SIGNATURE_PATH', '/lib/signatures');
define('AVATAR_PATH', '/lib/avatars');

# PIREP Statuses
define('PIREP_PENDING', 0);
define('PIREP_ACCEPTED', 1);
define('PIREP_REJECTED', 2);
define('PIREP_INPROGRESS', 3);

# Pilot Registration 
define('PILOT_PENDING', 0);
define('PILOT_ACCEPTED', 1);
define('PILOT_REJECTED', 2);

# Constants for 'paysource' column in ledger
define('PAYSOURCE_PIREP', 1);

# Constants for 'paytype' column in ledge
define('PILOT_PAY_HOURLY', 1);
define('PILOT_PAY_SCHEDULE', 2);
define('PILOT_PAY_FIXED', 3);

# Activity Feed types
define('ACTIVITY_NEW_PIREP', 1);
define('ACTIVITY_NEW_PILOT', 2);
define('ACTIVITY_PROMOTION', 3);
define('ACTIVITY_NEW_AWARD', 4);
define('ACTIVITY_NEW_BID', 5);
define('ACTIVITY_TWITTER', 6);

define('TWITTER_STATUS_URL', 'http://api.twitter.com/1/statuses/user_timeline.json?include_entities=0&screen_name=');

define('NAV_NDB', 2);
define('NAV_VOR', 3);
define('NAV_DME', 4);
define('NAV_FIX', 5);
define('NAV_TRACK', 6);

define('LOAD_VARIATION', 5);
define('SECONDS_PER_DAY', 86400);

define('VMS_AUTH_COOKIE', 'VMSAUTH');


/**
 * Library Includes (from 3rd Party)
 */
 
# Bit-masks for permission sets
$permission_set = array(
	/*'NO_ADMIN_ACCESS'			=> 0,*/
	'ACCESS_ADMIN'				=> 0x1, 
	'EDIT_NEWS'				=> 0x2, 
	'EDIT_PAGES'				=> 0x4, 
	'EDIT_DOWNLOADS'			=> 0x8,
	'EMAIL_PILOTS'                          => 0x10, 
	'EDIT_AIRLINES'                         => 0x20,
	'EDIT_FLEET'				=> 0x40,
	'EDIT_SCHEDULES'			=> 0x80,
	'IMPORT_SCHEDULES'                      => 0x100,
	'MODERATE_REGISTRATIONS'                => 0x200,
	'EDIT_PILOTS'				=> 0x400,
	'EDIT_GROUPS'				=> 0x800,
	'EDIT_RANKS'				=> 0x1000,
	'EDIT_AWARDS'				=> 0x2000,
	'MODERATE_PIREPS'			=> 0x4000,
	'EDIT_PIREPS_FIELDS'                    => 0x8000,
	'VIEW_FINANCES'                         => 0x10000,
	'EDIT_EXPENSES'                         => 0x20000,
	'EDIT_SETTINGS'                         => 0x40000,
	'EDIT_PROFILE_FIELDS'                   => 0x80000,
	'EDIT_VACENTRAL'			=> 0x100000,
        'MAINTENANCE'                           => 0x2000000,
        //'CUSTOM_PERM1'                          => 0x4000000,
        //'CUSTOM_PERM2'                          => 0x8000000,
        //'CUSTOM_PERM3'                          => 0x10000000,
        'FULL_ADMIN'                            => 0x7FFFFFFF // == 2147483647 == Maximum 32bits
);
# Discriptions for permission sets
$permission_discription = array(
	/*'NO_ADMIN_ACCESS'			=> 0,*/
	'ACCESS_ADMIN'				=> 'Give a user access to the administration panel. This is required if any other permissions are set.', 
	'EDIT_NEWS'				    => '(News &amp; Content) Give a user access to add &amp; edit the news &amp; notams.', 
	'EDIT_PAGES'				=> '(News &amp; Content) Give a user access to add &amp; edit the pages.', 
	'EDIT_DOWNLOADS'			=> '(News &amp; Content) Give a user access to add &amp; edit the downloads.',
	'EMAIL_PILOTS'              => '(News &amp; Content) Give a user access to email your pilots.', 
	'EDIT_AIRLINES'             => '(Airline Operations) Give a user access to add &amp; edit your airlines.',
	'EDIT_FLEET'				=> '(Airline Operations) Give a user access to add &amp; edit your fleet.',
	'EDIT_SCHEDULES'			=> '(Airline Operations) Give a user access to add &amp; edit schedules.',
	'IMPORT_SCHEDULES'          => '(Airline Operations) Give a user access to import and export schedules.',
	'MODERATE_REGISTRATIONS'	=> '(Pilots &amp; Groups) Allow a user to moderate new site registrations.',
	'EDIT_PILOTS'				=> '(Pilots &amp; Groups) Give a user access to edit your pilots.',
	'EDIT_GROUPS'				=> '(Pilots &amp; Groups) Give a user access to add &amp; edit pilot groups. Might aswell just give them full admin.',
	'EDIT_RANKS'				=> '(Pilots &amp; Groups) Give a user access to add &amp; edit ranks.',
	'EDIT_AWARDS'				=> '(Pilots &amp; Groups) Give a user access to add &amp; edit awards.',
	'MODERATE_PIREPS'			=> '(Pilot Reports (PIREPS)) Give a user access to moderate PIREPS',
	'EDIT_PIREPS_FIELDS'		=> '(Pilot Reports (PIREPS)) Give a user access to add and edit PIREPS fields.',
	'VIEW_FINANCES'             => '(Reports &amp; Expenses) Give a user access to view your finances.',
	'EDIT_EXPENSES'             => '(Reports &amp; Expenses) Give a user access to edit your expenses.',
	'EDIT_SETTINGS'             => '(Site &amp; Settings) Give a user access to edit your site settings.',
	'EDIT_PROFILE_FIELDS'		=> '(Site &amp; Settings) Give a user access to add and edit profile fields.',
	'EDIT_VACENTRAL'			=> '(Site &amp; Settings) Give a user access to edit your VACentral Settings.',
    //'CUSTOM_PERM0'              => 'Custom Discription of the permission',
    //'CUSTOM_PERM1'              => 'Custom Discription of the permission',
    //'CUSTOM_PERM2'              => 'Custom Discription of the permission',
    //'CUSTOM_PERM3'              => 'Custom Discription of the permission',
    'FULL_ADMIN'				=> 'Full Administration Over-ride. This option will automatically overide all above settings, enabling all of them.'
);
Config::Set('permission_set', $permission_set);  
Config::Set('permission_discription', $permission_discription);  
define('NO_ADMIN_ACCESS', 0);
foreach($permission_set as $key=>$value) {
	define($key, $value);
}
foreach($permission_discription as $key=>$value) {
	define($key.'_DISCRIP', $value);
}