BoardConfig.mk

#
# Copyright (C) 2015 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

TARGET_BOARD_PLATFORM := msm8994
TARGET_BOOTLOADER_BOARD_NAME := angler

TARGET_ARCH := arm64
TARGET_ARCH_VARIANT := armv8-a
TARGET_CPU_ABI := arm64-v8a
TARGET_CPU_ABI2 :=
TARGET_CPU_VARIANT := cortex-a53

TARGET_2ND_ARCH := arm
TARGET_2ND_ARCH_VARIANT := armv7-a-neon
TARGET_2ND_CPU_ABI := armeabi-v7a
TARGET_2ND_CPU_ABI2 := armeabi
TARGET_2ND_CPU_VARIANT := cortex-a53.a57

ENABLE_CPUSETS := true

BOARD_KERNEL_BASE := 0x00000000
BOARD_KERNEL_PAGESIZE := 4096
BOARD_KERNEL_TAGS_OFFSET := 0x01E00000
BOARD_RAMDISK_OFFSET := 0x02000000

BOARD_KERNEL_CMDLINE := androidboot.hardware=angler androidboot.console=ttyHSL0 msm_rtb.filter=0x37 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 boot_cpus=0-3 no_console_suspend
BOARD_MKBOOTIMG_ARGS := --ramdisk_offset $(BOARD_RAMDISK_OFFSET) --tags_offset $(BOARD_KERNEL_TAGS_OFFSET)

BOARD_USES_ALSA_AUDIO := true
BOARD_HAVE_BLUETOOTH := true
BOARD_HAVE_BLUETOOTH_BCM := true
BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := device/huawei/angler/bluetooth

BOARD_USES_SECURE_SERVICES := true

TARGET_NO_BOOTLOADER := true
TARGET_NO_RADIOIMAGE := true
TARGET_BOARD_INFO_FILE := device/huawei/angler/board-info.txt
TARGET_NO_RPC := true

BOARD_EGL_CFG := device/huawei/angler/egl.cfg

# Shader cache config options
# Maximum size of the  GLES Shaders that can be cached for reuse.
# Increase the size if shaders of size greater than 12KB are used.
MAX_EGL_CACHE_KEY_SIZE := 12*1024

# Maximum GLES shader cache size for each app to store the compiled shader
# binaries. Decrease the size if RAM or Flash Storage size is a limitation
# of the device.
MAX_EGL_CACHE_SIZE := 2048*1024

USE_OPENGL_RENDERER := true
TARGET_USES_ION := true
TARGET_USES_C2D_COMPOSITION := true
TARGET_FORCE_HWC_FOR_VIRTUAL_DISPLAYS := true
MAX_VIRTUAL_DISPLAY_DIMENSION := 2048

HAVE_ADRENO_SOURCE:= false

OVERRIDE_RS_DRIVER:= libRSDriver_adreno.so
BOARD_CHARGER_DISABLE_INIT_BLANK := true
# Enable auto suspend in poweroff charging to save power
BOARD_CHARGER_ENABLE_SUSPEND := true

# Enable dex-preoptimization to speed up first boot sequence
ifeq ($(HOST_OS),linux)
  ifneq ($(TARGET_BUILD_VARIANT),eng)
    ifeq ($(WITH_DEXPREOPT),)
      WITH_DEXPREOPT := true
    endif
  endif
endif

TARGET_USERIMAGES_USE_F2FS := true
TARGET_USERIMAGES_USE_EXT4 := true
BOARD_BOOTIMAGE_PARTITION_SIZE := 33554432
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 33554432
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 3221225472
BOARD_USERDATAIMAGE_PARTITION_SIZE := 26503790080
BOARD_CACHEIMAGE_PARTITION_SIZE := 104857600
BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_FLASH_BLOCK_SIZE := 131072

BOARD_HAL_STATIC_LIBRARIES := libdumpstate.angler

TARGET_RECOVERY_FSTAB = device/huawei/angler/fstab.angler
TARGET_COPY_OUT_VENDOR := vendor
TARGET_RELEASETOOLS_EXTENSIONS := device/huawei/angler

BOARD_SEPOLICY_DIRS += \
	device/huawei/angler/sepolicy

TARGET_USES_64_BIT_BINDER := true

TARGET_USES_AOSP := true

TARGET_USES_INTERACTION_BOOST := true

TARGET_RECOVERY_UI_LIB := librecovery_ui_nanohub

# Force camera module to be compiled only in 32-bit mode on 64-bit systems
# Once camera module can run in the native mode of the system (either
# 32-bit or 64-bit), the following line should be deleted
BOARD_QTI_CAMERA_32BIT_ONLY := true

# Wifi related defines
BOARD_WPA_SUPPLICANT_DRIVER := NL80211
WPA_SUPPLICANT_VERSION := VER_0_8_X
BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_bcmdhd
BOARD_HOSTAPD_DRIVER := NL80211
BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_bcmdhd
BOARD_WLAN_DEVICE := bcmdhd
WIFI_DRIVER_FW_PATH_PARAM := "/sys/module/bcmdhd/parameters/firmware_path"
WIFI_DRIVER_FW_PATH_STA := "/vendor/firmware/fw_bcmdhd.bin"
WIFI_DRIVER_FW_PATH_AP := "/vendor/firmware/fw_bcmdhd_apsta.bin"

#GPS
BOARD_VENDOR_QCOM_GPS_LOC_API_HARDWARE := $(TARGET_BOARD_PLATFORM)
BOARD_VENDOR_QCOM_LOC_PDK_FEATURE_SET := true

#NFC
NXP_CHIP_TYPE := 2

# Testing related defines
BOARD_PERFSETUP_SCRIPT := platform_testing/scripts/perf-setup/angler-setup.sh

USE_CLANG_PLATFORM_BUILD := true

# Temporary, will switch to a non-boardconfig enable soon. b/28545166.
BOARD_ENABLE_GPU_PROTECTED_CONTENT := true

-include vendor/huawei/angler/BoardConfigVendor.mk

BOARD_HAS_NO_SELECT_BUTTON := true
TARGET_RECOVERY_PIXEL_FORMAT := "RGBX_8888"

# TWRP
TW_THEME := portrait_hdpi
DEVICE_RESOLUTION := 1440x2560
RECOVERY_GRAPHICS_USE_LINELENGTH := true
BOARD_SUPPRESS_SECURE_ERASE := true
RECOVERY_SDCARD_ON_DATA := true
BOARD_HAS_NO_REAL_SDCARD := true
TW_INCLUDE_CRYPTO := true
TW_BRIGHTNESS_PATH := "/sys/class/leds/lcd-backlight/brightness"
TARGET_RECOVERY_QCOM_RTC_FIX := true

# MultiROM config.
TARGET_RECOVERY_IS_MULTIROM := true
MR_INPUT_TYPE := type_b
MR_INIT_DEVICES := device/huawei/angler/multirom/mr_init_devices.c
MR_DPI := xhdpi
MR_DPI_MUL := 2.0
MR_DPI_FONT := 435
MR_FSTAB := device/huawei/angler/recovery.fstab
MR_USE_MROM_FSTAB := false
MR_KEXEC_MEM_MIN := 0x0
MR_DEVICE_HOOKS := device/huawei/angler/multirom/mr_hooks.c
MR_DEVICE_HOOKS_VER := 6
MR_PIXEL_FORMAT := "RGBX_8888"
MR_ENCRYPTION := true
MR_ENCRYPTION_SETUP_SCRIPT := device/huawei/angler/multirom/mr_cp_crypto.sh
MR_ENCRYPTION_FAKE_PROPERTIES := true
MR_USE_QCOM_OVERLAY := true
MR_QCOM_OVERLAY_HEADER := device/huawei/angler/multirom/mr_qcom_overlay.h
MR_QCOM_OVERLAY_CUSTOM_PIXEL_FORMAT := MDP_RGBX_8888

include device/huawei/angler/MR_REC_VERSION.mk

ifeq ($(MR_REC_VERSION),)
MR_REC_VERSION := $(shell date -u +%Y%m%d)-01
endif

BOARD_MKBOOTIMG_ARGS += --board mrom$(MR_REC_VERSION)