Optimization.md

IC Ckt Optimization

1st Optimization

For P, our alternative second input to adder, we have $$P = \prod(3,5,6,7)$$

which can easily be implemented using So and D3.

$$P = S_\text{0} \land D_\text{3}$$

2nd Optimization

The first optimization was done while implementing P. Here is the second optimization:

Although we have $$C_\text{in} = \overline{D_\text{4} \land D_\text{3} }$$

After much speculation and analysis done by me, I found that extra ICs would be needed to implement the above operation. So, I decided to use De Morgan's law and got

$$C_\text{in} = \overline{D_\text{4}} \lor \overline{D_\text{3} }$$

This could be done by the vacant slots in the remaining ICs. Thus , optimizing the circuit.

3rd Optimization

I originally decided to use a hex inverter for getting Ai' and use a MUX to select between Ai and Ai'.

But I am dumb 😭

Why use a multiplexer and inverter when you can just use a XOR gate ?

So in the new circuit, I xored Ai with a selection bit(S3) such that I get Ai when the other input is 0 and Ai' when the other input is 1.

For this , the new equation of S3 :

$$S_\text{3} = \overline{D_\text{3}}$$

which we already obtained from one slot of a not gate gate. With that we don't need one MUX anymore.

Also, we orginally used that hex inverter for complemeting 2 bits of Bi. After previous optimization, we had 2 slots left in one of the two not gates.

So, we can use those slots and save an IC for NOT gate.

So, new gate count = 13 - 2 + 1 = 12.