README.md

RGB LED Example

This program cycles through the colours of an external RGB LED, connected to the FRDM-K64F board in its PWM pins.

Each colour is increased from 0 to 1 with a random delay between 0 and 0.5 seconds. Then the colour is decreased from 1 to 0 with a random delay between 0 and 0.5 seconds.

Since there are three colours, three threads are used to control each colour.

Hardware Instructions

The pinout for the FRDM-K64F board can be found here.

RGB LED

1. Connect the R pin to the D5/PTA2 (PWM) pin on the FRDM-K64F board.
2. Connect the G pin to the D6/PTC2 (PWM) pin on the FRDM-K64F board.
3. Connect the B pin to the D7/PTC3 (PWM) pin on the FRDM-K64F board.
4. Connect the GND pin to a GND pin on the FRDM-K64F board.