Ecowitt WS90 not decoded

[Blake-James]

I've got a 433MHz WS90, places in the same room a few m away from my RTL_SDR V4.
I've got a decent 433mhz antenna plugged into the sdr which I've confirmed as I can clearly see the WS90 transmitting on the SDR Sharp waterfall plot. Am running the latest firmware on the WS90, and latest version of rtl_433.
But for some reason the WS90 does not get automatically detected & decoded. Attached here is my log from
rtl_433 -vvv -R 244
where it seems to detect the WS90 but aborts the decoding. If I run with anything less verbose than -vvv then I don't see any activity in the terminal at all.
log_vvv.txt

Is anyone more experienced than this total sdr noob able to help me to get this WS90 automatically decoded please?
Note there's also a GW200 and several of their water timers ~50m away that might show up in the logs.

[Blake-James]

Here's a more verbose log
log_vvvv.txt

and another from rtl_433 -A -R 0
pulse_analyzer.txt

[zuckschwerdt]

It could be that the data is corrupted. Can you grab a sample and upload here as zip? https://triq.org/rtl_433/ANALYZE.html

[jpochmara]

Try adding:

-Y minmax -Y autolevel

To your rtl_433 command.