| Mouser | QTY | Part | Value | Package |
|---|---|---|---|---|
| 603-RC0805FR-07220RL | 2 | R3 R7 | 220R | 0805 |
| AC0805FR-0747RL | 4 | R1 R2 R5 R6 | 47R | 0805 |
| 652-CR0805FX-4700ELF | 2 | R4 R8 | 470R | 0805 |
| 80-C0805C104J5RACLR | 2 | C1 C2 | 100n | 0805 |
| 833-1N4148W-TP | 2 | D1 D2 | 1N4148 | SOD-123 |
| 859-6N138S | 2 | OK1 OK2 | 6N138 | SMD-8 |
| 2 | TEENSY_LC | |||
| 855-M20-9994045 | 1 | male pin headers* |
Order Teensy's from PJRC here
- pin headers can be whatever you have around. I get 1x40 headers in bulk from Tayda. Mouser has a 1x20 here 855-M20-9994045. Basically you need at least 2 1x3 headers to connect each of the Teensies. I also used a couple 1x2 headers as supports.
- Don't bother soldering pin headers to all the pins on the Teensies. You only need the last three pins on the USB connector end. (shown with white markings on the board)
