Releases: iNavFlight/inav-configurator
INAV Configurator 3.0.2
This version of INAV Configurator is intended to be used only with INAV firmware 3.0 families. INAV 2.6 and below are not supported at all!
Changes from the previous release
- Fixed the issue when Blackbox download from SPI flash had no extension
Very important!!
When updating firmware from 2.6 to 3.0 it is advised not to restore a full diff. Defaults on multiple settings have changed! It is suggested to tune based on the new defaults!
Known issues
- none
INAV Official on Telegram | |
INAV Official on Facebook |
Support developers for free by checking out from the following stores after having clicked on the following links:
Support us on Banggood |
Important notes
- always read README.md
- users are advised not to use Chrome App! Chrome Apps are deprecated and are in a process of being removed from Chrome
Recommended hardware
Flight controllers
Airplane models
Radios
Long range radio systems
GPS & Sensors
- Beitian BN180 GPS
- Beitian BN880Q GPS+COMPASS
- Beitian BN880 GPS+COMPASS
- Matek M8Q-5883
- Matek Lidar+OpFlow board
- Matek Digital Airspeed Sensor
- Benewake TFmini Lidar
- VL53L0X Lidar
FPV
- Foxeer T-Rex FPV camera
- RunCam Eagle 3 FPV camera
- Caddx Ratel 2 FPV camera
- Caddx Vista HD
- Rush Tank Ultimate
- Matek 1G3 video transmitter and receiver
- Eachine Cobra X FPV goggles
- Skyzone SKY04X FPV goggles
Other
You can get more suggestions following this link too.
INAV Configurator 3.0.1
This version of INAV Configurator is intended to be used only with INAV firmware 3.0 families. INAV 2.6 and below are not supported at all!
H743 support
This release of INAV Configurator is required to flash H743 boards. There are no other changes comparing to INAV Configurator 3.0.0.
MacOS version
MacOS version will be available later.
Very important!!
When updating firmware from 2.6 to 3.0 it is advised not to restore a full diff. Defaults on multiple settings have changed! It is suggested to tune based on the new defaults!
Known issues
- none
INAV Official on Telegram | |
INAV Official on Facebook |
Support developers for free by checking out from the following stores after having clicked on the following links:
Support us on Banggood |
Important notes
- always read README.md
- users are advised not to use Chrome App! Chrome Apps are deprecated and are in a process of being removed from Chrome
Recommended hardware
Flight controllers
Airplane models
Radios
Long range radio systems
GPS & Sensors
- Beitian BN180 GPS
- Beitian BN880Q GPS+COMPASS
- Beitian BN880 GPS+COMPASS
- Matek M8Q-5883
- Matek Lidar+OpFlow board
- Matek Digital Airspeed Sensor
- Benewake TFmini Lidar
- VL53L0X Lidar
FPV
- Foxeer T-Rex FPV camera
- RunCam Eagle 3 FPV camera
- Caddx Ratel 2 FPV camera
- Caddx Vista HD
- Rush Tank Ultimate
- Matek 1G3 video transmitter and receiver
- Eachine Cobra X FPV goggles
- Skyzone SKY04X FPV goggles
Other
You can get more suggestions following this link too.
INAV Configurator 3.0.0
This version of INAV Configurator is intended to be used only with INAV firmware 3.0 families. INAV 2.6 and below are not supported at all!
Very important!!
When updating firmware from 2.6 to 3.0 it is advised not to restore a full diff. Defaults on multiple settings have changed! It is suggested to tune based on the new defaults!
Known issues
- none
INAV Official on Telegram | |
INAV Official on Facebook |
Support developers for free by checking out from the following stores after having clicked on the following links:
Support us on Banggood |
Important notes
- always read README.md
- users are advised not to use Chrome App! Chrome Apps are deprecated and are in a process of being removed from Chrome
Recommended hardware
Flight controllers
Airplane models
Radios
Long range radio systems
GPS & Sensors
- Beitian BN180 GPS
- Beitian BN880Q GPS+COMPASS
- Beitian BN880 GPS+COMPASS
- Matek M8Q-5883
- Matek Lidar+OpFlow board
- Matek Digital Airspeed Sensor
- Benewake TFmini Lidar
- VL53L0X Lidar
FPV
- Foxeer T-Rex FPV camera
- RunCam Eagle 3 FPV camera
- Caddx Ratel 2 FPV camera
- Caddx Vista HD
- Rush Tank Ultimate
- Matek 1G3 video transmitter and receiver
- Eachine Cobra X FPV goggles
- Skyzone SKY04X FPV goggles
Other
You can get more suggestions following this link too.
INAV Configurator 3.0-RC2
This version of INAV Configurator is intended to be used only with INAV firmware 3.0 families. INAV 2.6 and below are not supported at all!
Very important!!
When updating firmware from 2.6 to 3.0 it is advised not to restore a full diff. Defaults on multiple settings have changed! It is suggested to tune based on the new defaults!
Known issues
- none
INAV Official on Telegram | |
INAV Official on Facebook |
Support developers for free by checking out from the following stores after having clicked on the following links:
Support us on Banggood |
Important notes
- always read README.md
- users are advised not to use Chrome App! Chrome Apps are deprecated and are in a process of being removed from Chrome
Recommended hardware
Flight controllers
Airplane models
Radios
Long range radio systems
GPS & Sensors
- Beitian BN180 GPS
- Beitian BN880Q GPS+COMPASS
- Beitian BN880 GPS+COMPASS
- Matek M8Q-5883
- Matek Lidar+OpFlow board
- Matek Digital Airspeed Sensor
- Benewake TFmini Lidar
- VL53L0X Lidar
FPV
- Foxeer T-Rex FPV camera
- RunCam Eagle 3 FPV camera
- Caddx Ratel 2 FPV camera
- Caddx Vista HD
- Rush Tank Ultimate
- Matek 1G3 video transmitter and receiver
- Eachine Cobra X FPV goggles
- Skyzone SKY04X FPV goggles
Other
You can get more suggestions following this link too.
INAV Configurator 3.0.0-RC1
This version of INAV Configurator is intended to be used only with INAV firmware 3.0 families. INAV 2.6 and below are not supported at all!
Very important!!
When updating firmware from 2.6 to 3.0 it is advised not to restore a full diff. Defaults on multiple settings have changed! It is suggested to tune based on the new defaults!
Known issues
- none
INAV Official on Telegram | |
INAV Official on Facebook |
Support developers for free by checking out from the following stores after having clicked on the following links:
Support us on Banggood |
Important notes
- always read README.md
- users are advised not to use Chrome App! Chrome Apps are deprecated and are in a process of being removed from Chrome
Recommended hardware
Flight controllers
Airplane models
Radios
Long range radio systems
GPS & Sensors
- Beitian BN180 GPS
- Beitian BN880Q GPS+COMPASS
- Beitian BN880 GPS+COMPASS
- Matek M8Q-5883
- Matek Lidar+OpFlow board
- Matek Digital Airspeed Sensor
- Benewake TFmini Lidar
- VL53L0X Lidar
FPV
- Foxeer T-Rex FPV camera
- RunCam Eagle 3 FPV camera
- Caddx Ratel 2 FPV camera
- Caddx Vista HD
- Rush Tank Ultimate
- Matek 1G3 video transmitter and receiver
- Eachine Cobra X FPV goggles
- Skyzone SKY04X FPV goggles
Other
You can get more suggestions following this link too.
INAV Configurator 2.6.1
This version of INAV Configurator is intended to be used only with INAV firmware 2.6 families. INAV 2.5 is supported on a basic level, INAV 2.4 and below are not supported at all!
Changes
- this version fixes a problem of not being able do download firmware list for flashing
Very important!!
When updating firmware from 2.5 to 2.6 it is advised not to restore a full diff. Defaults on multiple settings have changed! It is suggested to tune based on the new defaults!
Known issues
- none
INAV Official on Telegram | |
INAV Official on Facebook |
Support developers for free by checking out from the following stores after having clicked on the following links:
Support us on Banggood |
Important notes
- always read README.md
- users are advised not to use Chrome App! Chrome Apps are deprecated and are in a process of being removed from Chrome
Recommended hardware
Flight controllers
- Matek F722-SE
- Matel F722-WPS
- Matek F411-WSE
- Matek F765-WING
- Matek F722-MiniSE
- Holybro Kakute F7
- iFlight SucceX-E F4 Stack
Airplane models
Radios
Long range radio systems
GPS & Sensors
- Beitian BN180 GPS
- Beitian BN880Q GPS+COMPASS
- Beitian BN880 GPS+COMPASS
- Matek M8Q-5883
- Matek Lidar+OpFlow board
- Matek Digital Airspeed Sensor
- Benewake TFmini Lidar
- VL53L0X Lidar
FPV
- Foxeer T-Rex FPV camera
- RunCam Eagle 3 FPV camera
- Caddx Ratel 2 FPV camera
- Caddx Vista HD
- Rush Tank Ultimate
- Matek 1G3 video transmitter and receiver
- Eachine Cobra X FPV goggles
- Skyzone SKY04X FPV goggles
Other
You can get more suggestions following this link too.
INAV Configurator 2.6.0
This version of INAV Configurator is intended to be used only with INAV firmware 2.6 families. INAV 2.5 is supported on a basic level, INAV 2.4 and below are not supported at all!
Very important!!
When updating firmware from 2.5 to 2.6 it is advised not to restore a full diff. Defaults on multiple settings have changed! It is suggested to tune based on the new defaults!
Known issues
- none
INAV Official on Telegram | |
INAV Official on Facebook |
Support developers for free by checking out from the following stores after having clicked on the following links:
Support us on Banggood |
Important notes
- always read README.md
- users are advised not to use Chrome App! Chrome Apps are deprecated and are in a process of being removed from Chrome
Recommended hardware
Flight controllers
- Matek F722-SE
- Matel F722-WPS
- Matek F411-WSE
- Matek F765-WING
- Matek F722-MiniSE
- Holybro Kakute F7
- iFlight SucceX-E F4 Stack
Airplane models
Radios
Long range radio systems
GPS & Sensors
- Beitian BN180 GPS
- Beitian BN880Q GPS+COMPASS
- Beitian BN880 GPS+COMPASS
- Matek M8Q-5883
- Matek Lidar+OpFlow board
- Matek Digital Airspeed Sensor
- Benewake TFmini Lidar
- VL53L0X Lidar
FPV
- Foxeer T-Rex FPV camera
- RunCam Eagle 3 FPV camera
- Caddx Ratel 2 FPV camera
- Caddx Vista HD
- Rush Tank Ultimate
- Matek 1G3 video transmitter and receiver
- Eachine Cobra X FPV goggles
- Skyzone SKY04X FPV goggles
Other
You can get more suggestions following this link too.
INAV Configurator 2.6-RC1
This version of INAV Configurator is intended to be used only with INAV firmware 2.6 families. INAV 2.5 is supported on a basic level, INAV 2.4 and below are not supported at all!
Very important!!
When updating firmware from 2.5 to 2.6 it is advised not to restore a full diff. Defaults on multiple settings have changed! It is suggested to tune based on the new defaults!
Known issues
- none
INAV Official on Telegram | |
INAV Official on Facebook |
Support developers for free by checking out from the following stores after having clicked on the following links:
Support us on Banggood |
Important notes
- always read README.md
- users are advised not to use Chrome App! Chrome Apps are deprecated and are in a process of being removed from Chrome
Recommended hardware
Flight controllers
- Matek F722-SE
- Matel F722-WPS
- Matek F411-WSE
- Matek F765-WING
- Matek F722-MiniSE
- Holybro Kakute F7
- iFlight SucceX-E F4 Stack
Airplane models
Radios
Long range radio systems
GPS & Sensors
- Beitian BN180 GPS
- Beitian BN880Q GPS+COMPASS
- Beitian BN880 GPS+COMPASS
- Matek M8Q-5883
- Matek Lidar+OpFlow board
- Matek Digital Airspeed Sensor
- Benewake TFmini Lidar
- VL53L0X Lidar
FPV
- Foxeer T-Rex FPV camera
- RunCam Eagle 3 FPV camera
- Caddx Ratel 2 FPV camera
- Caddx Vista HD
- Rush Tank Ultimate
- Matek 1G3 video transmitter and receiver
- Eachine Cobra X FPV goggles
- Skyzone SKY04X FPV goggles
Other
You can get more suggestions following this link too.
INAV Configurator 2.5.0
This version of INAV Configurator is intended to be used only with INAV firmware 2.5 families. INAV 2.4 is supported on a basic level, INAV 2.3 and below are not supported at all!
Very important!!
When updating firmware from 2.4 to 2.5 it is advised not to restore a full diff. Defaults on multiple settings have changed! It is suggested to tune based on the new defaults!
Known issues
- none
Note for macOS users
We now have an experimental macOS app that lets you run INAV Configurator, BLHeli Configurator and Blackbox Viewer all from the same app. It includes automatic updates and it lets you run alpha/beta releases as well as old versions without having to manage them manually. Bluetooth is also supported out of the box. Check it out at https://inavapp.com.
We're still deciding if we should create similar apps for iOS and Android, so all feedback regarding this app is highly appreciated.
INAV Official on Telegram | |
INAV Official on Facebook |
Support developers for free by checking out from the following stores after having clicked on the following links:
Support us on Banggood |
Important notes
- always read README.md
- users are advised not to use Chrome App! Chrome Apps are deprecated and are in a process of being removed from Chrome
Changes from the previous release
- Programming Tab for Logic Conditions, Global Functions and Global Variables
- Support for Matrix Filter
- Support for Heading PID controller
- Rover and Boat support
- Improved defaults
- Receiver setup moved to the Receiver Tab
- Motor output is not presented in percent
- Configurable I2C speed
- Support for ESC temperature
- Current and Voltage sensor type is now configurable via GUI
- Preset improvements
- Improved Magnetometer/Compass calibration
- Multiple other improvements
Recommended hardware
Flight controllers
- Matek F722-SE
- Matel F722-WPS
- Matek F411-WSE
- Matek F765-WING
- Matek F722-MiniSE
- Holybro Kakute F7
- iFlight SucceX-E F4 Stack
Airplane models
Radios
Long range radio systems
GPS & Sensors
- Beitian BN180 GPS
- Beitian BN880Q GPS+COMPASS
- Beitian BN880 GPS+COMPASS
- Matek M8Q-5883
- Matek Lidar+OpFlow board
- Matek Digital Airspeed Sensor
- Benewake TFmini Lidar
- VL53L0X Lidar
FPV
- Foxeer T-Rex FPV camera
- RunCam Eagle 3 FPV camera
- Caddx Ratel 2 FPV camera
- Caddx Vista HD
- Rush Tank Ultimate
- Matek 1G3 video transmitter and receiver
- Eachine Cobra X FPV goggles
- Skyzone SKY04X FPV goggles
Other
You can get more suggestions following this link too.
INAV Configurator 2.5.0 RC2
This version of INAV Configurator is intended to be used only with INAV firmware 2.5 families. INAV 2.4 is supported on a basic level, INAV 2.3 and below are not supported at all!
Very important!!
When updating firmware from 2.4 to 2.5 it is advised not to restore a full diff. Defaults on multiple settings have changed! It is suggested to tune based on the new defaults!
Known issues
- none
Note for macOS users
We now have an experimental macOS app that lets you run INAV Configurator, BLHeli Configurator and Blackbox Viewer all from the same app. It includes automatic updates and it lets you run alpha/beta releases as well as old versions without having to manage them manually. Bluetooth is also supported out of the box. Check it out at https://inavapp.com.
We're still deciding if we should create similar apps for iOS and Android, so all feedback regarding this app is highly appreciated.
INAV Official on Telegram | |
INAV Official on Facebook |
Support developers for free by checking out from the following stores after having clicked on the following links:
Support us on Banggood |
Important notes
- always read README.md
- users are advised not to use Chrome App! Chrome Apps are deprecated and are in a process of being removed from Chrome
Changes from the previous release
- Programming Tab for Logic Conditions, Global Functions and Global Variables
- Support for Matrix Filter
- Support for Heading PID controller
- Rover and Boat support
- Improved defaults
- Receiver setup moved to the Receiver Tab
- Motor output is not presented in percent
- Configurable I2C speed
- Support for ESC temperature
- Current and Voltage sensor type is now configurable via GUI
- Preset improvements
- Improved Magnetometer/Compass calibration
- Multiple other improvements
Recommended hardware
Flight controllers
- Matek F722-SE
- Matel F722-WPS
- Matek F411-WSE
- Matek F765-WING
- Matek F722-MiniSE
- Holybro Kakute F7
- iFlight SucceX-E F4 Stack
Airplane models
Radios
Long range radio systems
GPS & Sensors
- Beitian BN180 GPS
- Beitian BN880Q GPS+COMPASS
- Beitian BN880 GPS+COMPASS
- Matek M8Q-5883
- Matek Lidar+OpFlow board
- Matek Digital Airspeed Sensor
- Benewake TFmini Lidar
- VL53L0X Lidar
FPV
- Foxeer T-Rex FPV camera
- RunCam Eagle 3 FPV camera
- Caddx Ratel 2 FPV camera
- Caddx Vista HD
- Rush Tank Ultimate
- Matek 1G3 video transmitter and receiver
- Eachine Cobra X FPV goggles
- Skyzone SKY04X FPV goggles
Other
You can get more suggestions following this link too.