ft_read_atlas.m

function atlas = ft_read_atlas(filename, varargin)

% FT_READ_ATLAS reads an template/individual segmentation or parcellation from disk.
% The volumetric segmentation or the surface-based parcellation can either represent
% a template atlas (e.g. AAL or the Talairach Daemon), it can represent an
% individualized atlas (e.g. obtained from FreeSurfer) or it can represent an
% unlabeled parcellation/segmentation obtained from an individual's DTi, anatomical,
% or resting state fMRI scan.
%
% Use as
%   atlas = ft_read_atlas(filename, ...)
% or
%   atlas = ft_read_atlas({filenamelabels, filenamemesh}, ...)
%
% Additional options should be specified in key-value pairs and can include
%   'format'      = string, see below
%   'unit'        = string, e.g. 'mm' (default is to keep it in the native units of the file)
%   'map'         = string, 'maxprob' (default), or 'prob', for FSL-based atlases, providing 
%                   either a probabilistic segmentation or a maximum a posterior probability map
%   'labelfile'   = string, point to a (generic) text or xml file for interpretation of the values in the atlas 
%
% For individual surface-based atlases from FreeSurfer you should specify two
% filenames as a cell-array: the first points to the file that contains information
% with respect to the parcels' labels, the second points to the file that defines the
% mesh on which the parcellation is defined.
%
% The 'format' variable, if not specified, will be determined automatically. In general
% it will not be needed to specify it. The following formats are supported:
%
% Volumetric atlases based on a (gzipped) nifti-file with an companion txt-file for interpretation
%   'aal'               assumes filename starting with 'ROI_MNI'
%   'brainnetome'       assumes companion lookuptable txt-file starting with 'Brainnetome Atlas'
%   'simnibs_v4'        assumes filename starting with 'final_tissues', with companion freesurfer-style lookuptable txt-file
%   'wfu'               assumes specific formatting of companion lookuptable txt-file
%
% Volumetric atlases based on a (gzipped) nifti-file with hard coded assumption on the labels
%   'yeo7' 
%   'yeo17'
%
% Volumetric atlases based on a folder with (gzipped) nifti-files with a companion xml-file for interpretation
%   'fsl'               assumes path to folder with data mentioned in the xml-file. Use xml-file as filename 
%
% Volumetric atlases based on the freesurfer mgz format with standard lookuptable txt-file for interpretation
%   'freesurfer_volume' assumes the freesurfer LUT file for interpretation, and assumes aparc or aseg in the 
%                       filename, used for subject-specific parcellations
%   
% Volumetric atlases based on the afni software
%   'afni'              assumes filename containing BRIK or HEAD, assumes generic interpretation of the labels 
%                       for the TTatlas+tlrc, or otherwise the interpretation should be in the file
%   
% Volumetric atlas based on the spm_anatomy toolbox
%   'spm_anatomy'       pair of .hdr/.img files, and an associated mat-file for the interpretation
%                       Specify the associated mat-file with MPM in filename 
%
% Surface based atlases, requiring a pair of files, containing the labels, and the associated geometry
%   'caret_label'       hcp-workbench/caret style .gii, with .label. in filename, requires additional file describing the geometry
%   'freesurfer_surface' freesurfer style annotation file, requires additional file describing the geometry 
%
% Miscellaneous formats
%   'mat'               mat-file, with FieldTrip style struct, other matlab data that FieldTrip knows to handle, can also be 
%                       Brainstorm derived surfaces
%   'vtpm'
%
% For volume data for whicth the format cannot be automatically detected, or if the volume data does not have a companion file 
% for the interpretation of the labels, a list of 'fake' labels will be generated.
%
% The output atlas will be represented as structure according to FT_DATATYPE_SEGMENTATION or
% FT_DATATYPE_PARCELLATION.
%
% The 'lines' and the 'colorcube' colormaps may be useful for plotting the different
% patches, for example using FT_PLOT_MESH, or FT_SOURCEPLOT.
%
% See also FT_READ_MRI, FT_READ_HEADSHAPE, FT_PREPARE_SOURCEMODEL, FT_SOURCEPARCELLATE, FT_PLOT_MESH

% Copyright (C) 2005-2019, Robert Oostenveld, Ingrid Nieuwenhuis, Jan-Mathijs Schoffelen, Arjen Stolk
% Copyright (C) 2023, Jan-Mathijs Schoffelen
%
% This file is part of FieldTrip, see http://www.fieldtriptoolbox.org
% for the documentation and details.
%
%    FieldTrip is free software: you can redistribute it and/or modify
%    it under the terms of the GNU General Public License as published by
%    the Free Software Foundation, either version 3 of the License, or
%    (at your option) any later version.
%
%    FieldTrip is distributed in the hope that it will be useful,
%    but WITHOUT ANY WARRANTY; without even the implied warranty of
%    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
%    GNU General Public License for more details.
%
%    You should have received a copy of the GNU General Public License
%    along with FieldTrip. If not, see <http://www.gnu.org/licenses/>.
%
% $Id$

% deal with multiple filenames, if the geometry and labels are stored
% in different files, as with freesurfer/caret
if isa(filename, 'cell')
  if numel(filename)==2
    filenamemesh = filename{2};
    filename     = filename{1};
  else
    ft_error('with multiple filenames, only 2 files are allowed');
  end % if precisely two input files
end % iscell

% optionally get the data from an URL and make a temporary local copy
filename = fetch_url(filename);

[p, f, x] = fileparts(filename);

labelfile = ft_getopt(varargin, 'labelfile', []);
ftype     = ft_filetype(filename);    

% if the original file was a .gz
if isequal(x,'.gz')
  [p, f, x] = fileparts(filename(1:end-3));
end

% do an educated guess of the format based on the input, ensure that the
% required additional functions are available, and specify the companion labelfile 
if contains(filename, 'BRIK') || contains(filename, 'HEAD')
  % the above is needed to correctly detect zipped files
  ft_hastoolbox('afni', 1);

  % this is robust for both compressed or uncompressed afni atlases. 
  format = 'afni';  
elseif startsWith(ftype, 'nifti')

  % first handle the ones for which the labels are implicit in the filename
  if contains(f, 'Yeo2011_7Networks')
    % assume to be conform the shared atlas, with hardcoded index-to-label mapping
    format = 'yeo7';
  elseif contains(f, 'Yeo2011_17Networks')
    % assume to be conform the shared atlas, with hardcoded index-to-label mapping
    format = 'yeo17';
  end

  % try for different conventions of the naming of a potential companion labelfile
  if isempty(labelfile)
    labelfile = fullfile(p, sprintf('%s.txt', f));
    if ~exist(labelfile, 'file')
      % in case the volume was zipped, and the txt only replaced the gz
      labelfile = fullfile(p, sprintf('%s.nii.txt', f));
    end
    if ~exist(labelfile, 'file')
      labelfile = ''; % revert back to empty
    end
  end

  if ~isempty(labelfile)
    % do a quick check on the companion labelfile to specify the format
    fid = fopen_or_error(labelfile, 'rt');
    l1  = fgetl(fid);
    if strcmp(l1(1),'[') && strcmp(l1(end),']')
      % specific to this one is that some of the wakeforest atlases contain non-human data, so no fixed coordsys can be assumed
      format   = 'wfu';
      coordsys = 'unknown';
    elseif strcmp(l1,'Brainnetome Atlas')
      % specific to this one is the coordinate system it seems
      format   = 'brainnetome';
      coordsys = 'mni'; % apparently the image is in radiological convention,
      % so the voxel-axes are left-handed. The even valued parcels should end
      % up in the right hemisphere
    elseif contains(filename, 'ROI_MNI') || contains(filename, 'AAL')
      % newer versions of AAL also exist with a companion .xml file, this is not yet supported
      format   = 'aal';
      coordsys = 'mni';
    end
    fclose(fid);
  end
  if contains(filename, 'final_tissues')
    ft_hastoolbox('freesurfer', 1); % required to read lookuptable

    % assume to be from SimNIBS version 4
    format = 'simnibs_v4';

    labelfile = fullfile(p, sprintf('%s_LUT.txt', f));
  end
  
  if isempty(labelfile)
    % just a nifti file without interpretation of labels
    format = 'nifti_no_label';
  end

elseif isequal(ftype, 'freesurfer_mgz') && contains(f, 'aparc') || contains(f, 'aseg')
  ft_hastoolbox('freesurfer', 1);

  % individual volume based segmentation from freesurfer
  format = 'freesurfer_volume';
  
  if isempty(labelfile)
    % use the version for freesurfer that is in fieldtrip/external/freesurfer
    [ftver, ftpath] = ft_version;
    labelfile  = fullfile(ftpath, 'external/freesurfer', 'FreeSurferColorLUT.txt');
  end

elseif isequal(ftype, 'freesurfer_annot')
  ft_hastoolbox('freesurfer', 1);

  % individual volume based segmentation from freesurfer
  format = 'freesurfer_surface';
  
elseif isequal(ftype, 'caret_label')
  ft_hastoolbox('gifti', 1);

  % this is a gifti file that contains both the values for a set of vertices as well as the labels.
  format = 'caret_label';
  
elseif contains(filename, 'MPM.mat')
  ft_hastoolbox('spm8up', 1);

  % assume to be from the spm_anatomy toolbox
  format = 'spm_anatomy';

elseif exist(fullfile(p, [f '_MPM.mat']), 'file')
    ft_warning('please specify the corresponding MPM.mat file as the filename');
    filename = fullfile(p, [f '_MPM.mat']); % update the filename
    [p, f, x] = fileparts(filename);

    ft_hastoolbox('spm8up', 1);

    % assume to be from the spm_anatomy toolbox
    format = 'spm_anatomy';

elseif strcmp(x, '.xml')
  ft_hastoolbox('gifti', 1); % required to read the xml

  % fsl-style atlas, this is assumed to consist of an .xml file that specifies the labels, as well as a pointer
  % to the file/folder with the volume data.
  format = 'fsl';

  labelfile = fullfile(p, sprintf('%s.xml',f));

elseif strcmp(x, '.mat')
  % mat-file to contain a well-defined structure
  format = 'mat';

else

  format = 'unknown';
end

% get the optional input arguments
fileformat = ft_getopt(varargin, 'format', format);
unit       = ft_getopt(varargin, 'unit');

switch fileformat
  case {'aal' 'brainnetome' 'freesurfer_volume' 'nifti_no_label' 'simnibs_v4' 'wfu'}
    atlas = ft_read_mri(filename, 'outputfield', 'tissue');
    
    % interpret the format specific labelfile
    if isequal(fileformat, 'aal')
      % The labelfile is a combination of nii+txt file, where the txt file may contain three columns like this
      %   FAG	Precentral_L	2001
      %   FAD	Precentral_R	2002
      %   ...
   
      fid = fopen_or_error(labelfile, 'rt');
      C = textscan(fid, '%s%s%d');
      lab = C{2};
      idx = C{3};
      fclose(fid);
    elseif isequal(fileformat, 'wfu')
      % the download from http://fmri.wfubmc.edu comes with pairs of nii and txt files
      % the text file looks like this, with tabs between the colums
      % the section at the end with three times 191 does not always exist
      %
      % [ TD Labels]
      % 53	Angular Gyrus         191 191 191
      % 39	Anterior Cingulate		191 191 191
      % ...

      fid = fopen_or_error(labelfile, 'rt');
      C = textscan(fid, '%d%s%*[^\n]', 'HeaderLines', 1, 'Delimiter', '\t');
      lab = C{2};
      idx = C{1};
      fclose(fid);
    elseif any(strcmp(fileformat, {'simnibs_v4' 'freesurfer_volume'}))
      [idx, lab, rgba] = read_fscolorlut(labelfile);
      lab = cellstr(lab);
    elseif isequal(fileformat, 'brainnetome')
      % Brainnetome Atlas: L. Fan, et al.The Human Brainnetome Atlas: A New Brain Atlas Based on
      % Connectional Architecture. Cereb Cortex 2016; 26 (8): 3508-3526. doi: 10.1093/cercor/bhw157
      fid = fopen_or_error(labelfile, 'rt');
      fgetl(fid); % this reads: 'Brainnetome Atlas'
      lab = cell(246,1);
      for i=1:246
        lab{i,1}=fgetl(fid);
      end
      idx = (1:246)';
      fclose(fid);
     
    elseif isequal(fileformat, 'nifti_no_label')
      % the file does not exist
      ft_warning('cannot locate a labelfile, making default tissue labels');
      
      idx = (1:max(atlas.tissue(:)))';
      lab = cell(size(idx));
      for i = 1:numel(lab)
        % this is consistent with FIXSEGMENTATION
        lab{i} = sprintf('tissue %d', i);
      end
    end
    
    if ~isfield(atlas, 'coordsys') && exist('coordsys', 'var')
      atlas.coordsys = coordsys;
    end
    
    uval = unique(atlas.tissue(:));
    sel  = find(ismember(idx, uval));
    fprintf('subselecting %d labels from the total list of %d\n', numel(sel), numel(lab));
    idx  = idx(sel);
    lab  = lab(sel);
    if exist('rgba', 'var') 
      tmprgba = rgba(sel,:);
      rgba = zeros(0,4);
    end

    % remap the values in the data, if needed
    if ~isequal(idx(:)', 1:numel(idx))
      dat = zeros(atlas.dim);
      cnt = 0;
      for k = 1:numel(idx)
        sel = atlas.tissue==idx(k);
        if sum(sel(:))
          cnt = cnt+1;
          fprintf('re-indexing label %s to a value of %d (was %d)\n', lab{k}, cnt, idx(k));
          dat(sel)           = cnt;
          tissuelabel{cnt,1} = lab{k};
          if exist('rgba', 'var')
            rgba(cnt,:) = tmprgba(k,:);
          end
        end
      end
      atlas.tissue = dat;
    else
      tissuelabel = lab;
    end

    atlas.tissuelabel = tissuelabel;
    if exist('rgba', 'var'), atlas.rgba = rgba; end
    
    % reduce memory footprint
    if numel(tissuelabel)<=intmax('uint8')
      atlas.tissue = uint8(atlas.tissue);
    elseif numel(tissuelabel)<=intmax('uint16')
      atlas.tissue = uint16(atlas.tissue);
    elseif numel(tissuelabel)<=intmax('uint32')
      atlas.tissue = uint32(atlas.tissue);
    end

  case 'afni'
    
    tmp     = ft_read_mri(filename);
    if isfield(tmp, 'coordsys') && ~strcmp(tmp.coordsys, 'unknown')
      coordsys = tmp.coordsys;
    elseif isfield(tmp.hdr, 'TEMPLATE_SPACE') && ~isempty(tmp.hdr.TEMPLATE_SPACE)
      coordsys = lower(tmp.hdr.TEMPLATE_SPACE); % FIXME this is based on AFNI conventions, not easily decodable by FT
    else
      coordsys = 'tal'; % FIXME could be different in other atlases
    end

    if isfield(tmp.hdr, 'ATLAS_LABEL_TABLE') && ~isempty(tmp.hdr.ATLAS_LABEL_TABLE)
      if isfield(tmp.hdr.ATLAS_LABEL_TABLE(1), 'sb_label') && ~all(tmp.anatomy(:)==round(tmp.anatomy(:)))
        % probabilistic atlas
        isprobabilistic = true;
      else
        % indexed atlas
        isprobabilistic = false;
      end
      labels  = {tmp.hdr.ATLAS_LABEL_TABLE.struct}';
      values  = [tmp.hdr.ATLAS_LABEL_TABLE.val]';
      
    elseif contains(filename, 'TTatlas+tlrc')
      isprobabilistic = false;
      
      [labels, values] = TTatlas_labels;
      
    else
      ft_error('no information about the atlas labels is available');
    end
    
    atlas     = [];
    atlas.dim = tmp.dim(1:3);
    atlas.transform = tmp.transform;
    atlas.hdr = tmp.hdr;
    atlas.coordsys = coordsys;
    
    nbrick  = size(tmp.anatomy,4);
    for k = 1:nbrick
      
      if ~isprobabilistic
        brickname = sprintf('brick%d',k-1);
        brick     = tmp.anatomy(:,:,:,k);
        ulabel    = setdiff(unique(brick(:)), 0);
        label     = cell(size(ulabel));
        nlabel    = numel(label);
        
        % renumber the brick from 1:N and keep track of the label
        newbrick  = zeros(size(brick));
        for i = 1:nlabel
          sel = find(values==ulabel(i));
          if ~isempty(sel)
            label(i) = labels(sel);
            newbrick(brick==ulabel(i)) = i;
          else
            ft_warning('the value %d does not have a label according to the ATLAS_LABEL_TABLE and will be discarded', ulabel(i));
          end
        end
        atlas.(brickname) = newbrick;
        atlas.([brickname 'label']) = label;
      else
        atlas.(labels{k}) = tmp.anatomy(:,:,:,values(k)+1); % indexing is 0-based in this case
      end
        
    end

  case {'freesurfer_surface'}
    
    if contains(filename, 'a2009s')
      parcelfield = 'a2009s';
    elseif contains(filename, 'aparc')
      parcelfield = 'aparc';
    elseif contains(filename, 'ba')
      parcelfield = 'BA';
    else
      ft_error('unknown freesurfer parcellation type requested');
    end
    
    % read the labels
    [v, p, c] = read_annotation(filename);

    label = c.struct_names;
    rgba  = c.table(:,1:4);
    rgb   = c.table(:,5); % compound value that is used for the indexing in vector p
    index = ((1:c.numEntries)-1)';
    
    switch ft_filetype(filenamemesh)
      case 'freesurfer_triangle_binary'
        [pos, tri] = read_surf(filenamemesh);
        
        % ensure the triangles to be 1-indexed
        if min(tri(:))==0 && max(tri(:))==size(pos,1)-1
          tri = tri+1;
        end
        
        bnd.pos    = pos;
        bnd.tri    = tri;
        reindex    = true;
      otherwise
        ft_error('unsupported fileformat for surface mesh');
    end
    
    % check the number of vertices
    if size(bnd.pos,1) ~= numel(p)
      ft_error('the number of vertices in the mesh does not match the number of elements in the parcellation');
    end
    
    % reindex the parcels, if needed: I am not fully sure about this, but the caret
    % label files seem to have the stuff numbered with normal numbers, with unknown
    % being -1. assuming them to be in order;
    if reindex
      % this is then freesurfer convention, coding in rgb
      newp = zeros(size(p));
      for k = 1:numel(label)
        newp(p==rgb(k)) = index(k)+1;
      end
    else
      uniquep = unique(p);
      if uniquep(1)<0
        p(p<0) = 0;
      end
      newp   = p;
    end
    atlas       = [];
    atlas.pos   = bnd.pos;
    atlas.tri   = bnd.tri;
    atlas.(parcelfield)            = newp;
    atlas.([parcelfield, 'label']) = label;
    atlas.rgba  = rgba;
    atlas       = ft_determine_units(atlas);
    
  case 'caret_label'
    
    g = gifti(filename);
    
    rgba = [];
    if isfield(g, 'labels')
      label = g.labels.name(:);
      key   = g.labels.key(:);
      if isfield(g.labels, 'rgba')
        rgba = g.labels.rgba; % I'm not sure whether this always exists
      end
    else
      label = g.private.label.name(:);
      key   = g.private.label.key(:);
      if isfield(g.private.label, 'rgba')
        rgba = g.private.label.rgba; % I'm not sure whether this always exists
      end
    end
    
    %label = g.private.label.name; % provides the name of the parcel
    %key   = g.private.label.key;  % maps value to name
    
    % Store each column in cdata as an independent parcellation, because
    % each vertex can have multiple values in principle
    
    atlas = [];
    for k = 1:size(g.cdata,2)
      tmporig  = g.cdata(:,k);
      tmpnew   = nan(size(tmporig));
      tmplabel = cell(0,1);
      tmprgba  = zeros(0,4);
      cnt = 0;
      for m = 1:numel(label)
        sel = find(tmporig==key(m));
        if ~isempty(sel)
          cnt = cnt+1;
          if any(strcmp(tmplabel,deblank(label{m})))
            % one feature of a gifti can be that the same labels can exist (and
            % are treated as a different parcel) while they should be the same
            % parcel, i.e. when there's an empty space at the end of the label
            val = find(strcmp(tmplabel, deblank(label{m})));
          else
            % add as a new label
            tmplabel{end+1,1} = label{m};
            if ~isempty(rgba), tmprgba(end+1,:)  = rgba(m,:); end
            val = cnt;
          end
          tmpnew(tmporig==key(m)) = val;
        end
      end
      
      % there is some additional meta data that may be useful, but for now
      % stick to the rather uninformative parcellation1/2/3 etc.
      %
      % if strcmp(g.private.data{k}.metadata(1).name, 'Name')
      %   parcelfield = fixname(g.private.data{k}.metadata(1).value);
      % else
      %   ft_error('could not determine parcellation name');
      % end
      
      if size(g.cdata,2)>1
        parcelfield = ['parcellation' num2str(k)];
      else
        parcelfield = 'parcellation';
      end
      
      atlas.(parcelfield)           = tmpnew;
      atlas.([parcelfield 'label']) = tmplabel;
      if ~isempty(tmprgba), atlas.rgba = tmprgba; end
    end
    
    if exist('filenamemesh', 'var')
      tmp       = ft_read_headshape(filenamemesh);
      atlas.pos = tmp.pos;
      atlas.tri = tmp.tri;
      atlas     = ft_determine_units(atlas);
    elseif ~isfield(atlas, 'coordsys')
      atlas.coordsys = 'unknown';
    end
    
  case 'spm_anatomy'
    
    % load the map, this is assumed to be the struct-array MAP
    load(filename);
    [p,f,e]      = fileparts(filename);
    mrifilename  = fullfile(p,[strrep(f, '_MPM',''),'.img']);
    atlas        = ft_read_mri(mrifilename, 'dataformat', 'analyze_img', 'outputfield', 'tissue');
    tissue       = round(atlas.tissue); % I don't know why the values are non-integer
    label        = {MAP.name}';
    idx          = [MAP.GV]';
    
    % check whether all labels are present
    if numel(intersect(idx,unique(tissue(:))))<numel(idx)
      fprintf('there are fewer labels in the volume than in the list\n');
    end
    
    % remap the values of the labels to run from 1-numel(idx)
    newtissue = zeros(size(tissue));
    for k = 1:numel(idx)
      newtissue(tissue==idx(k)) = k;
    end
    atlas.tissue      = newtissue;
    atlas.tissuelabel = label;
    atlas.coordsys    = 'spm'; % I think this is safe to assume
    
    clear tissue newtissue;
    
  case 'fsl'
    map = ft_getopt(varargin, 'map', 'maxprob');
    switch map
      case 'prob'
        imagefile = 'imagefile';
      case 'maxprob'
        imagefile = 'summaryimagefile';
      otherwise
        error('unknown map requested');
    end
    
    ft_hastoolbox('gifti', 1);
    hdr = xmltree(filename);
    hdr = convert(hdr);
    
    % get the full path
    [p, f , x]  = fileparts(filename);
    
    mrifilename = sprintf('%s.nii.gz', hdr.header.images{1}.(imagefile));
    if isequal(mrifilename(1), '/')
      mrifilename = mrifilename(2:end); % remove first backslash to avoid error if no full path was given
    end
    
    % this uses the thresholded image
    switch map
      case 'maxprob'
        atlas        = ft_read_mri(fullfile(p, mrifilename), 'outputfield', 'tissue');
        atlas.tissuelabel = hdr.data.label(:);
        atlas.coordsys    = 'mni';
      case 'prob'
        tmp   = ft_read_mri(fullfile(p, mrifilename));
        atlas = removefields(tmp, 'anatomy');
        for m = 1:numel(hdr.data.label)
          fn = strrep(hdr.data.label{m}, ' ' , '_');
          fn = strrep(fn, '-', '_');
          fn = strrep(fn, '(', '');
          fn = strrep(fn, ')', '');
          
          atlas.(fn) = tmp.anatomy(:,:,:,m);
          if ~isa(atlas.(fn), 'double') && ~isa(atlas.(fn), 'single')
            % ensure that the probabilistic values are either double or
            % single precision, do single precision to save memory
            atlas.(fn) = single(atlas.(fn));
          end
          if any(atlas.(fn)(:)>1) && all(atlas.(fn)(:)<=100)
            % convert to probability values, assuming 100 to be max
            atlas.(fn) = atlas.(fn)./100;
          end
        end
        atlas.coordsys = 'mni';
        atlas.dim      = atlas.dim(1:3);
    end
    
  case 'mat'
    tmp = load(filename);
    if isfield(tmp, 'Vertices') && isfield(tmp, 'Atlas')
      % this applies to BrainStorm *.mat files containing cortical meshes
      atlas.pos = tmp.Vertices;
      % copy some optional fields over with a new name
      atlas = copyfields(tmp, atlas, {'Faces', 'Curvature', 'SulciMap'});
      atlas = renamefields(atlas, {'Faces', 'Curvature', 'SulciMap'}, {'tri', 'curv', 'sulc'});
      for i=1:numel(tmp.Atlas)
        name   = fixname(tmp.Atlas(i).Name);
        nlabel = numel(tmp.Atlas(i).Scouts);
        label  = cell(1, nlabel);
        index  = zeros(size(atlas.pos,1), 1);
        for j=1:nlabel
          index(tmp.Atlas(i).Scouts(j).Vertices) = j;
          label{j} = tmp.Atlas(i).Scouts(j).Label;
        end
        atlas.( name         ) = index;
        atlas.([name 'label']) = label;
      end
    elseif isfield(tmp, 'atlas')
      % this applies to most FieldTrip *.mat files
      atlas = tmp.atlas;
    elseif numel(fieldnames(tmp))==1
      % just take whatever variable is contained in the file
      fn = fieldnames(tmp);
      atlas = tmp.(fn{1});
      if isstruct(atlas)
        ft_warning('assuming that the variable "%s" in "%s" represents the atlas', fn{1}, filename);
      else
        ft_error('cannot read atlas structure from "%s"', filename);
      end
    else
      ft_error('the mat-file %s does not contain a variable called ''atlas''',filename);
    end
    
  case 'yeo7'
    % this uses Yeo2011_7Networks_MNI152_FreeSurferConformed1mm_LiberalMask_colin27.nii, which is
    % the 7 network parcellation from https://surfer.nmr.mgh.harvard.edu/fswiki/CorticalParcellation_Yeo2011 
    % aligned to the colin27 template (skull-stripped version of single_subj_T1_1mm.nii) 
    % using AFNI's 3dQwarp and 3dNwarpApply
    atlas = ft_read_mri(filename, 'outputfield', 'tissue');
    
    atlas.coordsys    = 'mni';
    atlas.tissuelabel = {
      '7Networks_1'
      '7Networks_2'
      '7Networks_3'
      '7Networks_4'
      '7Networks_5'
      '7Networks_6'
      '7Networks_7'
      };
    
    colors = [
      120 18 134;
      70 130 180;
      0 118 14;
      196 58 250;
      220 248 164;
      230 148 34;
      205 62 78
      ]; % not used
    
  case 'yeo17'
    % this uses Yeo2011_17Networks_MNI152_FreeSurferConformed1mm_LiberalMask_colin27.nii, which is
    % the 17 network parcellation from https://surfer.nmr.mgh.harvard.edu/fswiki/CorticalParcellation_Yeo2011 
    % aligned to the colin27 template (skull-stripped version of single_subj_T1_1mm.nii) using AFNI's 3dQwarp and 3dNwarpApply
    atlas = ft_read_mri(filename, 'outputfield', 'tissue');
    
    atlas.coordsys    = 'mni';
    atlas.tissuelabel = {
      '17Networks_1'
      '17Networks_2'
      '17Networks_3'
      '17Networks_4'
      '17Networks_5'
      '17Networks_6'
      '17Networks_7'
      '17Networks_8'
      '17Networks_9'
      '17Networks_10'
      '17Networks_11'
      '17Networks_12'
      '17Networks_13'
      '17Networks_14'
      '17Networks_15'
      '17Networks_16'
      '17Networks_17'
      };
    colors = [
      120 18 134;
      255 0 0;
      70 130 180;
      42 204 164;
      74 155 60;
      0 118 14;
      196 58 250;
      255 152 213;
      220 248 164;
      122 135 50;
      119 140 176;
      230 148 34;
      135 50 74;
      12 48 255;
      0 0 130;
      255 255 0;
      205 62 78
      ]; % not used
    
  otherwise
    ft_error('unsupported format "%s"', fileformat);
    
end % switch fileformat

if ~isempty(unit)
  % ensure the atlas is in the desired units
  atlas = ft_convert_units(atlas, unit);
else
  % ensure the units of the atlas are specified
  try
    atlas = ft_determine_units(atlas);
  catch
    % ft_determine_units will fail for triangle-only gifties.
  end
end

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% TTatlas labels moved to a subfunction for readability of the above code
function [labels, values] = TTatlas_labels

% the following information is from https://sscc.nimh.nih.gov/afni/doc/misc/afni_ttatlas/index_html
values = [
  68
  71
  20
  21
  22
  24
  25
  26
  27
  28
  29
  30
  31
  32
  33
  34
  35
  36
  37
  39
  40
  41
  42
  43
  44
  45
  46
  47
  48
  49
  50
  51
  52
  70
  72
  73
  74
  75
  76
  77
  124
  125
  126
  128
  129
  130
  131
  132
  133
  134
  135
  136
  137
  138
  144
  145
  151
  146
  147
  148
  149
  81
  82
  83
  84
  85
  86
  87
  88
  89
  90
  91
  93
  94
  95
  96
  97
  98
  99
  100
  101
  102
  103
  104
  105
  106
  107
  108
  109
  110
  111
  112
  113
  114
  115
  116
  117
  118
  119
  120
  121
  122
  123
  53
  54
  55
  56
  57
  58
  59
  60
  61
  62
  63
  66
  65
  127
  64
  67
  ];

labels = {
  'Hippocampus'
  'Amygdala'
  'Posterior Cingulate'
  'Anterior Cingulate'
  'Subcallosal Gyrus'
  'Transverse Temporal Gyrus'
  'Uncus'
  'Rectal Gyrus'
  'Fusiform Gyrus'
  'Inferior Occipital Gyrus'
  'Inferior Temporal Gyrus'
  'Insula'
  'Parahippocampal Gyrus'
  'Lingual Gyrus'
  'Middle Occipital Gyrus'
  'Orbital Gyrus'
  'Middle Temporal Gyrus'
  'Superior Temporal Gyrus'
  'Superior Occipital Gyrus'
  'Inferior Frontal Gyrus'
  'Cuneus'
  'Angular Gyrus'
  'Supramarginal Gyrus'
  'Cingulate Gyrus'
  'Inferior Parietal Lobule'
  'Precuneus'
  'Superior Parietal Lobule'
  'Middle Frontal Gyrus'
  'Paracentral Lobule'
  'Postcentral Gyrus'
  'Precentral Gyrus'
  'Superior Frontal Gyrus'
  'Medial Frontal Gyrus'
  'Lentiform Nucleus'
  'Hypothalamus'
  'Red Nucleus'
  'Substantia Nigra'
  'Claustrum'
  'Thalamus'
  'Caudate'
  'Caudate Tail'
  'Caudate Body'
  'Caudate Head'
  'Ventral Anterior Nucleus'
  'Ventral Posterior Medial Nucleus'
  'Ventral Posterior Lateral Nucleus'
  'Medial Dorsal Nucleus'
  'Lateral Dorsal Nucleus'
  'Pulvinar'
  'Lateral Posterior Nucleus'
  'Ventral Lateral Nucleus'
  'Midline Nucleus'
  'Anterior Nucleus'
  'Mammillary Body'
  'Medial Globus Pallidus'
  'Lateral Globus Pallidus'
  'Putamen'
  'Nucleus Accumbens'
  'Medial Geniculum Body'
  'Lateral Geniculum Body'
  'Subthalamic Nucleus'
  'Brodmann area 1'
  'Brodmann area 2'
  'Brodmann area 3'
  'Brodmann area 4'
  'Brodmann area 5'
  'Brodmann area 6'
  'Brodmann area 7'
  'Brodmann area 8'
  'Brodmann area 9'
  'Brodmann area 10'
  'Brodmann area 11'
  'Brodmann area 13'
  'Brodmann area 17'
  'Brodmann area 18'
  'Brodmann area 19'
  'Brodmann area 20'
  'Brodmann area 21'
  'Brodmann area 22'
  'Brodmann area 23'
  'Brodmann area 24'
  'Brodmann area 25'
  'Brodmann area 27'
  'Brodmann area 28'
  'Brodmann area 29'
  'Brodmann area 30'
  'Brodmann area 31'
  'Brodmann area 32'
  'Brodmann area 33'
  'Brodmann area 34'
  'Brodmann area 35'
  'Brodmann area 36'
  'Brodmann area 37'
  'Brodmann area 38'
  'Brodmann area 39'
  'Brodmann area 40'
  'Brodmann area 41'
  'Brodmann area 42'
  'Brodmann area 43'
  'Brodmann area 44'
  'Brodmann area 45'
  'Brodmann area 46'
  'Brodmann area 47'
  'Uvula of Vermis'
  'Pyramis of Vermis'
  'Tuber of Vermis'
  'Declive of Vermis'
  'Culmen of Vermis'
  'Cerebellar Tonsil'
  'Inferior Semi-Lunar Lobule'
  'Fastigium'
  'Nodule'
  'Uvula'
  'Pyramis'
  'Culmen'
  'Declive'
  'Dentate'
  'Tuber'
  'Cerebellar Lingual'
  };