clearpathrobotics
diff --git a/‎docs_robots/outdoor_robots/husky/a300/troubleshooting_husky.mdx
Lines changed: 3 additions & 0 deletions b/‎docs_robots/outdoor_robots/husky/a300/troubleshooting_husky.mdx
Lines changed: 3 additions & 0 deletions
diff --git a/‎static/img/robot_images/husky_a300_images/husky_a300_system_panel_header1.png
67.2 KB b/‎static/img/robot_images/husky_a300_images/husky_a300_system_panel_header1.png
67.2 KB
diff --git a/‎static/img/robot_images/husky_a300_images/husky_a300_system_panel_header2.png
46.1 KB b/‎static/img/robot_images/husky_a300_images/husky_a300_system_panel_header2.png
46.1 KB
@@ -261,6 +261,9 @@ On rare occasions, this can occur if the BIOS gets reset and does not power on t
    the BIOS setup and update the settings so that the computer powers on by default.
    Specifically, navigate to `Advanced → Chipset Configuration → Restore on AC/Power Loss`
    and set the value to `Power On`.
+1. If the computer does not power on after shorting the PWRBTN# and GND pins,
+   unplug the 2x2 power connector on the motherboard and (using a Multimeter set to DC voltage)
+   probe it, ensuring that the necessary 12 V is being supplied.
 
 ---