Unable to connect keyboard & mouse after booting.

[leckie-chn]

• image: mycroft-bigscreen-rpi4-20200326_BETA.img.gz
• hardware: Raspberry Pi 4 Computer Model B 8GB RAM
• SD card: SanDisk Ultra 16GB TF card

Everything is ok, the booting process, and the desktop did show up. The voice assistant even tells me to connect to the internet. But when the keyboard and mouse do not respond after connected via USB 2/3. Then it got stuck at something like "please wait until system ready" and the startup page (the one with many apps). But you just can't input anything via keyboard or mouse.

I thought it might be hardware issue, but after I re-imaged the SD card and flashed it with another OS image, the official Raspberry Pi OS the keyboard and mouse are working again. So I believe it must be the OS issue.

BTW, I also tried blind ssh after booting. Turns out the SSH port is open, but the official pi username seems not working on plasma. So if I could know the ssh username & password, this issue can be mitigated via SSH login first.

[AIIX]

the ssh username/pass is: mycroft as mentioned on https://plasma-bigscreen.org/

[chickooiyer]

image: mycroft-bigscreen-rpi4-20200326_BETA.img.gz
hardware: Raspberry Pi 4 Computer Model B 8GB RAM
SD card: SanDisk Ultra 232GB TF card

I tried using my logitech wireless keyboard and mouse, but they are not responding. I also tried an air mouse the situation is the same. Please find the dmesg below:

mycroft@raspberrypi4:$ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 4.19.83-rpi (ubuntu@alcor) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu118.04.1)) #1 SMP PREEMPT Thu Nov 14 11:17:22 UTC 2019
[ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.4
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 256 MiB at 0x000000001bc00000
[ 0.000000] On node 0 totalpages: 1998848
[ 0.000000] DMA32 zone: 2816 pages used for memmap
[ 0.000000] DMA32 zone: 0 pages reserved
[ 0.000000] DMA32 zone: 180224 pages, LIFO batch:63
[ 0.000000] Normal zone: 28672 pages used for memmap
[ 0.000000] Normal zone: 1818624 pages, LIFO batch:63
[ 0.000000] random: get_random_bytes called from start_kernel+0xb4/0x480 with crng_init=0
[ 0.000000] percpu: Embedded 24 pages/cpu s58904 r8192 d31208 u98304
[ 0.000000] pcpu-alloc: s58904 r8192 d31208 u98304 alloc=24*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[ 0.000000] CPU features: enabling workaround for EL2 vector hardening
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1967360
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1360x768M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=DC:A6:32:AE:81:BB vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_compat_alsa=0 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 fsck.repair=yes fsck.mode=auto root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] software IO TLB: mapped [mem 0x17c00000-0x1bc00000] (64MB)
[ 0.000000] Memory: 7507020K/7995392K available (9852K kernel code, 1126K rwdata, 2948K rodata, 1088K init, 875K bss, 226228K reserved, 262144K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 32574 entries in 128 pages
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000231] Console: colour dummy device 80x25
[ 0.000614] console [tty1] enabled
[ 0.000667] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.000703] pid_max: default: 32768 minimum: 301
[ 0.001055] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.001164] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.024042] ASID allocator initialised with 32768 entries
[ 0.032038] rcu: Hierarchical SRCU implementation.
[ 0.040550] EFI services will not be available.
[ 0.048095] smp: Bringing up secondary CPUs ...
[ 0.080293] Detected PIPT I-cache on CPU1
[ 0.080360] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.112377] Detected PIPT I-cache on CPU2
[ 0.112420] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.144491] Detected PIPT I-cache on CPU3
[ 0.144534] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.144676] smp: Brought up 1 node, 4 CPUs
[ 0.144767] SMP: Total of 4 processors activated.
[ 0.144789] CPU features: detected: 32-bit EL0 Support
[ 0.145689] CPU: All CPU(s) started at EL2
[ 0.145740] alternatives: patching kernel code
[ 0.147169] devtmpfs: initialized
[ 0.155586] Enabled cp15_barrier support
[ 0.155634] Enabled setend support
[ 0.156026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.156068] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.162695] xor: measuring software checksum speed
[ 0.200609] 8regs : 2536.000 MB/sec
[ 0.240686] 8regs_prefetch: 2177.000 MB/sec
[ 0.280763] 32regs : 2855.000 MB/sec
[ 0.320841] 32regs_prefetch: 2510.000 MB/sec
[ 0.320861] xor: using function: 32regs (2855.000 MB/sec)
[ 0.320891] pinctrl core: initialized pinctrl subsystem
[ 0.321533] DMI not present or invalid.
[ 0.321959] NET: Registered protocol family 16
[ 0.323329] cpuidle: using governor menu
[ 0.323725] vdso: 2 pages (1 code @ (ptrval), 1 data @ (ptrval))
[ 0.323753] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.326411] DMA: preallocated 1024 KiB pool for atomic allocations
[ 0.326526] Serial: AMBA PL011 UART driver
[ 0.329924] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.425352] raid6: int64x1 gen() 343 MB/s
[ 0.493318] raid6: int64x1 xor() 328 MB/s
[ 0.561513] raid6: int64x2 gen() 476 MB/s
[ 0.629553] raid6: int64x2 xor() 472 MB/s
[ 0.697691] raid6: int64x4 gen() 697 MB/s
[ 0.765850] raid6: int64x4 xor() 526 MB/s
[ 0.834010] raid6: int64x8 gen() 649 MB/s
[ 0.902065] raid6: int64x8 xor() 519 MB/s
[ 0.970195] raid6: neonx1 gen() 693 MB/s
[ 1.038352] raid6: neonx1 xor() 774 MB/s
[ 1.106485] raid6: neonx2 gen() 910 MB/s
[ 1.174592] raid6: neonx2 xor() 951 MB/s
[ 1.242732] raid6: neonx4 gen() 1258 MB/s
[ 1.310846] raid6: neonx4 xor() 1063 MB/s
[ 1.379005] raid6: neonx8 gen() 1350 MB/s
[ 1.447096] raid6: neonx8 xor() 1152 MB/s
[ 1.447115] raid6: using algorithm neonx8 gen() 1350 MB/s
[ 1.447134] raid6: .... xor() 1152 MB/s, rmw enabled
[ 1.447154] raid6: using neon recovery algorithm
[ 1.447722] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[ 1.450027] vgaarb: loaded
[ 1.450369] SCSI subsystem initialized
[ 1.450613] usbcore: registered new interface driver usbfs
[ 1.450684] usbcore: registered new interface driver hub
[ 1.450802] usbcore: registered new device driver usb
[ 1.450902] pps_core: LinuxPPS API ver. 1 registered
[ 1.450923] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [email protected]
[ 1.450968] PTP clock support registered
[ 1.458649] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-03-10 15:57, variant start
[ 1.462659] raspberrypi-firmware soc:firmware: Firmware hash is 74d7f53b091e465285f38fb96896a8fc328e4c47
[ 1.468103] clocksource: Switched to clocksource arch_sys_counter
[ 1.559815] VFS: Disk quotas dquot_6.6.0
[ 1.559926] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.560838] simple-framebuffer 3e7cb000.framebuffer: framebuffer at 0x3e7cb000, 0x3fc000 bytes, mapped to 0x(ptrval)
[ 1.560875] simple-framebuffer 3e7cb000.framebuffer: format=a8r8g8b8, mode=1360x768x32, linelength=5440
[ 1.566479] Console: switching to colour frame buffer device 170x48
[ 1.571356] simple-framebuffer 3e7cb000.framebuffer: fb0: simplefb registered!
[ 1.580719] NET: Registered protocol family 2
[ 1.581584] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[ 1.581734] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.582245] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.583181] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.583472] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.583645] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.584061] NET: Registered protocol family 1
[ 1.584890] RPC: Registered named UNIX socket transport module.
[ 1.584960] RPC: Registered udp transport module.
[ 1.585013] RPC: Registered tcp transport module.
[ 1.585065] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.585133] NET: Registered protocol family 44
[ 1.585192] PCI: CLS 0 bytes, default 64
[ 1.587412] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 1.587721] kvm [1]: 8-bit VMID
[ 1.588477] kvm [1]: vgic interrupt IRQ1
[ 1.588738] kvm [1]: Hyp mode initialized successfully
[ 1.592615] Initialise system trusted keyrings
[ 1.594619] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[ 1.602026] zbud: loaded
[ 1.606275] NFS: Registering the id_resolver key type
[ 1.608073] Key type id_resolver registered
[ 1.609914] Key type id_legacy registered
[ 1.611671] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.616785] Key type asymmetric registered
[ 1.618621] Asymmetric key parser 'x509' registered
[ 1.620505] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.622532] io scheduler noop registered
[ 1.624367] io scheduler deadline registered (default)
[ 1.626338] io scheduler cfq registered
[ 1.628167] io scheduler mq-deadline registered (default)
[ 1.629935] io scheduler kyber registered
[ 1.666393] brcm-pcie fd500000.pcie: dmabounce: initialised - 32768 kB, threshold 0x00000000c0000000
[ 1.668268] brcm-pcie fd500000.pcie: could not get clock
[ 1.670096] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.671888] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000
[ 1.748134] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)
[ 1.750202] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.751926] pci_bus 0000:00: root bus resource [bus 00-01]
[ 1.753666] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[ 1.755431] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.755597] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.758535] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.760472] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 1.760540] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 1.760721] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 1.763442] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01
[ 1.763496] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 1.765319] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 1.767029] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.768730] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 1.770442] pci 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.772121] pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 7.254092] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801
[ 7.255733] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x8c0 took 5356720 usecs
[ 7.260755] iproc-rng200 fe104000.rng: hwrng registered
[ 7.262649] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 7.265053] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 7.267003] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 7.278722] brd: module loaded
[ 7.290633] loop: module loaded
[ 7.293027] rbd: loaded (major 254)
[ 7.295504] Loading iSCSI transport class v2.0-870.
[ 7.298888] libphy: Fixed MDIO Bus: probed
[ 7.301029] bcmgenet fd580000.genet: failed to get enet clock
[ 7.302701] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000
[ 7.304379] bcmgenet fd580000.genet: failed to get enet-wol clock
[ 7.306010] bcmgenet fd580000.genet: failed to get enet-eee clock
[ 7.307621] bcmgenet: Skipping UMAC reset
[ 7.309453] unimac-mdio unimac-mdio.-19: DMA mask not set
[ 7.320145] libphy: bcmgenet MII bus: probed
[ 7.344757] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval)
[ 7.347302] usbcore: registered new interface driver r8152
[ 7.349019] usbcore: registered new interface driver lan78xx
[ 7.350685] usbcore: registered new interface driver smsc95xx
[ 7.352617] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 7.354215] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 7.855827] xhci_hcd 0000:01:00.0: can't setup: -110
[ 7.857445] xhci_hcd 0000:01:00.0: USB bus 1 deregistered
[ 7.859053] xhci_hcd 0000:01:00.0: init 0000:01:00.0 fail, -110
[ 7.860687] xhci_hcd: probe of 0000:01:00.0 failed with error -110
[ 7.862596] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 7.864360] dwc_otg: FIQ enabled
[ 7.864368] dwc_otg: NAK holdoff enabled
[ 7.864376] dwc_otg: FIQ split-transaction FSM enabled
[ 7.864387] Module dwc_common_port init
[ 7.864627] usbcore: registered new interface driver uas
[ 7.866244] usbcore: registered new interface driver usb-storage
[ 7.867998] mousedev: PS/2 mouse device common for all mice
[ 7.870780] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 7.872592] bcm2835-cpufreq: min=600000 max=1500000
[ 7.874789] sdhci: Secure Digital Host Controller Interface driver
[ 7.876376] sdhci: Copyright(c) Pierre Ossman
[ 7.878282] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[ 7.880226] sdhci-pltfm: SDHCI platform and OF driver helper
[ 7.884893] ledtrig-cpu: registered to indicate activity on CPUs
[ 7.886599] hidraw: raw HID events driver (C) Jiri Kosina
[ 7.888320] usbcore: registered new interface driver usbhid
[ 7.889856] usbhid: USB HID core driver
[ 7.892334] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[ 7.897170] Initializing XFRM netlink socket
[ 7.898814] NET: Registered protocol family 17
[ 7.900706] Key type dns_resolver registered
[ 7.902281] Key type ceph registered
[ 7.904257] libceph: loaded (mon/osd proto 15/24)
[ 7.906680] registered taskstats version 1
[ 7.908208] Loading compiled-in X.509 certificates
[ 7.909773] zswap: loaded using pool lzo/zbud
[ 7.912748] Btrfs loaded, crc32c=crc32c-generic, ref-verify=on
[ 7.921533] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 7.923186] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 19, base_baud = 0) is a PL011 rev2
[ 7.928441] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 7.930681] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver
[ 7.932988] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 7.934643] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 7.962444] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.1
[ 7.981735] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 7.985011] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 7.988229] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 7.992680] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 7.995842] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 7.997453] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[ 8.001352] of_cfs_init
[ 8.003033] of_cfs_init: OK
[ 8.005335] Waiting for root device /dev/mmcblk0p2...
[ 8.053298] random: fast init done
[ 8.073220] mmc1: new high speed SDIO card at address 0001
[ 8.104934] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
[ 8.108066] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
[ 8.112429] mmcblk0: p1 p2
[ 8.125238] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 8.126945] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 8.129354] devtmpfs: mounted
[ 8.135816] Freeing unused kernel memory: 1088K
[ 8.137723] Run /sbin/init as init process
[ 8.461970] systemd[1]: System time before build time, advancing clock.
[ 8.578906] NET: Registered protocol family 10
[ 8.581897] Segment Routing with IPv6
[ 8.622794] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 8.628593] systemd[1]: Detected architecture arm64.
[ 8.643666] systemd[1]: Set hostname to .
[ 9.003769] random: systemd: uninitialized urandom read (16 bytes read)
[ 9.009193] systemd[1]: Set up automount boot-firmware.automount.
[ 9.013471] random: systemd: uninitialized urandom read (16 bytes read)
[ 9.016431] systemd[1]: Created slice System Slice.
[ 9.020474] random: systemd: uninitialized urandom read (16 bytes read)
[ 9.022901] systemd[1]: Listening on Journal Socket.
[ 9.027133] systemd[1]: Listening on udev Kernel Socket.
[ 9.035000] systemd[1]: Mounting POSIX Message Queue File System...
[ 9.039646] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 9.048654] systemd[1]: Starting File System Check on Root Device...
[ 9.380239] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 9.456846] systemd-journald[109]: Received request to flush runtime journal from PID 1
[ 9.482750] systemd-journald[109]: File /var/log/journal/4e8914b952924427a333a41fd850804d/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 9.810742] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:4382716k SSFS
[ 10.153507] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff
[ 10.154118] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff
[ 10.154602] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff
[ 10.155053] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff
[ 10.184382] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.185318] media: Linux media interface: v0.10
[ 10.219950] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 10.221149] [vc_sm_connected_init]: start
[ 10.234105] [vc_sm_connected_init]: installed successfully
[ 10.256809] videodev: Linux video capture interface: v2.00
[ 10.320051] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.328620] bcm2835_audio soc:audio: card created with 4 channels
[ 10.342151] bcm2835_audio soc:audio: card created with 4 channels
[ 10.385542] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.416425] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.447840] random: crng init done
[ 10.447858] random: 7 urandom warning(s) missed due to ratelimiting
[ 10.546512] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
[ 10.622995] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
[ 10.623017] checking generic (3e7cb000 3fc000) vs hw (0 ffffffffffffffff)
[ 10.623027] fb: switching to vc4drmfb from simple
[ 10.623238] Console: switching to colour dummy device 80x25
[ 10.624400] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 1
[ 10.624413] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.624423] [drm] No driver support for vblank timestamp query.
[ 10.624431] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL
[ 10.639825] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 10.703588] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 10.765815] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 10.765834] cfg80211: failed to load regulatory.db
[ 10.828852] Console: switching to colour frame buffer device 170x48
[ 10.842607] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 10.849804] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 10.850175] usbcore: registered new interface driver brcmfmac
[ 10.859479] vc4-drm soc:gpu: fb0: DRM emulated frame buffer device
[ 11.105534] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 11.124401] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 2 2020 23:30:41 version 7.45.202 (r724630 CY) FWID 01-72f6ece2
[ 12.100813] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.100992] bcmgenet: Skipping UMAC reset
[ 12.172685] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)
[ 12.173529] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.193675] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.221208] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.221507] brcmfmac: power management disabled
[ 12.425096] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.184289] bcmgenet fd580000.genet eth0: Link is Down
[ 36.962812] input: python-uinput as /devices/virtual/input/input0
[ 210.816987] bcmgenet fd580000.genet eth0: Link is Up - 100Mbps/Full - flow control off
[ 210.817092] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[Louren]

Same problems as described.
Official Raspberry image working perfectly, but this image not (tried the 20200323 and 20200326 images, the latter from https://sourceforge.net/projects/bigscreen/files/rpi4/beta/).

Even a traditional USB simple Logitech mouse is not recognized, and there seems to be no power. (i.e. red light not powering on).

[AIIX]

Issue is fixed is latest release with kernel and firmware upgrades