Added gif

Author: BenjaminDannegard

content/hardware/10.mega/shields/giga-display-shield/tutorials/06.image-orientation/content.md

@@ -166,13 +166,13 @@ void loop() {
 
 ### Using Another Image 
 
-Any image could be used in the sketch. This tutorial and the example uses an image of the Arduino logo. Alternatively, any raw RGB565 image can be used. If you have an image you want to use, you can use this [online image converter](https://lvgl.io/tools/imageconverter), or any other software that lets you convert an image to a raw RGB565 image. This website will output in the Binary RGB565 format. For further instructions on how to display your own image, have a look at our [Text and Image tutorial](text-and-image).
+Any image could be used in the sketch. This tutorial and the example uses an image of the Arduino logo. Alternatively, any raw RGB565 image can be used. If you have an image you want to use, you can use this [online image converter](https://lvgl.io/tools/imageconverter), or any other software that lets you convert an image to a raw RGB565 image. This website will output in the Binary RGB565 format. For further instructions on how to display your own image, have a look at our [Text and Image tutorial](/tutorials/basic-draw-and-image#display-images).
 
 ## Testing It Out
 
 Now try rotating your device to see if the image behaves correctly. If the image does not rotate correctly have another look at the values you entered into the previous sketch. It might help to try and run the simple IMU readings printer sketch to take a quick look at the IMU values in the serial monitor. This will help you figure out what values should be considered when the device is being moved. 
 
-[GIF of the orientation sketch running on the screen]()
+[GIF of the orientation sketch running on the screen](assets/image-orientation.gif)
 
 ## Conclusion