Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Motors run full speed as soon as Arduino is powered up and not connected via USB #23

Open
circuitBurn opened this issue May 2, 2020 · 1 comment
Open

Motors run full speed as soon as Arduino is powered up and not connected via USB #23

circuitBurn opened this issue May 2, 2020 · 1 comment

Comments

@circuitBurn
Copy link

This happens with any sketch, even the examples.

Sketches upload and run fine when tethered by USB and the serial monitor displays the right output, but when the Arduino is powered up without a USB connection (even with the infinite loop Serial check removed) the motors are all on at full speed.
@facchinm
Copy link
Contributor

Hi @circuitBurn ,
we released version 2.0 of the library with fw 0.20 that should fix the motors startup.
Can you try updating both the library and the carrier (using Flasher sketch) and report back if it's fixed on your setup? Thanks

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@circuitBurn @facchinm