Can't into UF2 bootloader mode on ESP32-S3 board with MicroPython.

[water5]

I install MicroPython on ESP32-S3 use https://micropython.org/resources/firmware/ESP32_GENERIC_S3-20250415-v1.25.0.uf2 via TinyUF2, but can't into UF2 bootloader mode (the BOOT drive not appear) after machine.bootloader().

I install CircuitPython on the same ESP32-S3 board, TinyUF2 bootloader works fine.

@https://github.com/orgs/micropython/discussions/17525