Storage control mode defaulting to time of use

[sfdevoogd]

Hi,

I'm currently running modbus-multi version 3.1.1 and it's correctly fetching and writing to the inverter (SE4000H).
Every time I set the storage control mode to Remote Control to charge from solar and grid power it successfully writes to the inverter:

After about 5-10 seconds the charge will stop and the storage control mode defaults back to time of use:

The system is still enrolled into the grid program (pending offboarding) in case that's perhaps the reason.

Any help is much appreciated!

P.S. Thank you for the awesome work @WillCodeForCats!

[sfdevoogd]

After speaking to SolarEdge support, this may be related to the Grid Program so will await the offboarding and try again.

[sfdevoogd]

Successfully left the grid program and now have full control over the inverter.

[Noodleyman]

Glad you sorted this. had a friend with similar issues on his setup. Those programs essentially take control of your system, and anything you to do get it back other than leave the program, will fail.