Battery available energy exceeds maximum

[warmexx]

Describe the bug

My B1 Available Energy sensor has some data for about a day length. I'm not sure, but I think the data was gathered when I just moved from the "other integration" to yours.

To debug I dumped the values for the sensor:

float_to_hex(self._platform.decoded_model["B_Energy_Available"]) = 0x46189c29
hex(SunSpecNotImpl.FLOAT32) = 0x7fc00000
self._platform.decoded_model['B_Energy_Available'] = 9767.0400390625
self._platform.decoded_common['B_RatedEnergy'] * self._platform.battery_rating_adjust = 9700.0

so it's obvious why the sensor returns no data.

Expected behavior

I expect to have data for this sensor.

Screenshots

Diagnostic File

config_entry-solaredge_modbus_multi-01J6Y11X43DPTYCN1G2GSCMXTE.json

Debug logs

No response

Home Assistant Version

2024.9.1

solaredge-modbus-multi Version

2.4.20

Installation Type

HAOS

Read the Instructions

• My configuration follows https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Configuration
• I have read the Known Issues https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Known-Issues
• This issue is not about a template error (do not report template errors, read https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Template-Design-Notes)

Additional Context

No response

[WillCodeForCats]

Did you change the rating adjust value?

[WillCodeForCats]

https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Configuration#battery-options

[warmexx]

No I didn't, I just added your integration after disabling the other one. I did try to power cycle battery and inverter but that didn't make a difference. At the moment my battery is at 32% and I still don't have available energy. I'll set the adjust value to 1% and see what happens. Thanks for responding so quickly.

[WillCodeForCats]

I do a lot more data validation and checks because I hate seeing bad data or spikes messing up my graphs. In some cases, like this one, SolarEdge may over-rate some batteries in software above the nameplate rating.

[warmexx]

[warmexx]

I would have expected something like available = 30% of maximum