DC Amps - Entity is non numeric

[george369]

Entity becomes unavailable, displaying "entity is non-numeric" error, when there is no production from the panels. Issue happens only with the below specified entity while all other entities (specifically DC Volts and DC Power) display zero as result (Likewise for AC). Entity is used in HA standard gauge card. When solar production is resumed, entity and eventually card, behave normally.

Entity: sensor.solaredge_i1_dc_current

Any ideas?

Thank you all in advance!

[WillCodeForCats]

This is not a problem I've seen personally; when my inverters are off/sleep DC current reads zero.

You will need to upload your diagnostic file snapshot at the exact time the error is occurring.

[george369]

config_entry-solaredge_modbus_multi-8d9e852de49436303eeb3d98b6a3c9d8.json.txt

[WillCodeForCats]

Thanks, I will try simulating this on my test platform to see if there's a better way to handle the values the inverter is returning.

[george369]

Thank you very much for your efforts, much appreciated.