sdkconfig

#
# Automatically generated file; DO NOT EDIT.
# Espressif IoT Development Framework Configuration
#
CONFIG_TARGET_PLATFORM_ESP32=
CONFIG_TARGET_PLATFORM_ESP8266=y

#
# SDK tool configuration
#
CONFIG_TOOLPREFIX="xtensa-lx106-elf-"
CONFIG_PYTHON="python"
CONFIG_MAKE_WARN_UNDEFINED_VARIABLES=y

#
# Bootloader config
#
CONFIG_BOOTLOADER_INIT_SPI_FLASH=y
CONFIG_BOOTLOADER_DISABLE_JTAG_IO=
CONFIG_LOG_BOOTLOADER_LEVEL_NONE=
CONFIG_LOG_BOOTLOADER_LEVEL_ERROR=
CONFIG_LOG_BOOTLOADER_LEVEL_WARN=
CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y
CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG=
CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE=
CONFIG_LOG_BOOTLOADER_LEVEL=3
CONFIG_BOOTLOADER_CHECK_APP_SUM=y
CONFIG_BOOTLOADER_CHECK_APP_HASH=
CONFIG_BOOTLOADER_APP_TEST=

#
# Serial flasher config
#
CONFIG_ESPTOOLPY_PORT="/dev/ttyUSB0"
CONFIG_ESPTOOLPY_BAUD_115200B=
CONFIG_ESPTOOLPY_BAUD_230400B=
CONFIG_ESPTOOLPY_BAUD_921600B=y
CONFIG_ESPTOOLPY_BAUD_2MB=
CONFIG_ESPTOOLPY_BAUD_OTHER=
CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200
CONFIG_ESPTOOLPY_BAUD=921600
CONFIG_ESPTOOLPY_COMPRESSED=y
CONFIG_FLASHMODE_QIO=y
CONFIG_FLASHMODE_QOUT=
CONFIG_FLASHMODE_DIO=
CONFIG_FLASHMODE_DOUT=
CONFIG_ESPTOOLPY_FLASHMODE="dio"
CONFIG_SPI_FLASH_MODE=0x0
CONFIG_ESPTOOLPY_FLASHFREQ_80M=
CONFIG_ESPTOOLPY_FLASHFREQ_40M=y
CONFIG_ESPTOOLPY_FLASHFREQ_26M=
CONFIG_ESPTOOLPY_FLASHFREQ_20M=
CONFIG_ESPTOOLPY_FLASHFREQ="40m"
CONFIG_SPI_FLASH_FREQ=0x0
CONFIG_ESPTOOLPY_FLASHSIZE_1MB=
CONFIG_ESPTOOLPY_FLASHSIZE_2MB=
CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
CONFIG_ESPTOOLPY_FLASHSIZE_8MB=
CONFIG_ESPTOOLPY_FLASHSIZE_16MB=
CONFIG_ESPTOOLPY_FLASHSIZE="4MB"
CONFIG_SPI_FLASH_SIZE=0x400000
CONFIG_ESPTOOLPY_BEFORE_RESET=y
CONFIG_ESPTOOLPY_BEFORE_NORESET=
CONFIG_ESPTOOLPY_BEFORE="default_reset"
CONFIG_ESPTOOLPY_AFTER_RESET=y
CONFIG_ESPTOOLPY_AFTER_NORESET=
CONFIG_ESPTOOLPY_AFTER="hard_reset"
CONFIG_MONITOR_BAUD_9600B=
CONFIG_MONITOR_BAUD_57600B=
CONFIG_MONITOR_BAUD_74880B=
CONFIG_MONITOR_BAUD_115200B=y
CONFIG_MONITOR_BAUD_230400B=
CONFIG_MONITOR_BAUD_921600B=
CONFIG_MONITOR_BAUD_2MB=
CONFIG_MONITOR_BAUD_OTHER=
CONFIG_MONITOR_BAUD_OTHER_VAL=74880
CONFIG_MONITOR_BAUD=115200
CONFIG_ESPTOOLPY_ENABLE_TIME=
CONFIG_ESPTOOLPY_ENABLE_SAVELOG=

#
# QCloud IoT demo Configuration
#
CONFIG_SMART_LIGHT_ENABLED=
CONFIG_GATEWAY_ENABLED=
CONFIG_RAW_DATA_ENABLED=
CONFIG_MQTT_ENABLED=
CONFIG_DYNREG_ENABLED=
CONFIG_DATA_TEMPLATE_ENABLED=
CONFIG_WIFI_CONFIG_ENABLED=y
CONFIG_DEMO_EXAMPLE_SELECT=6
CONFIG_SOFTAP_CONFIG_ENABLED=y
CONFIG_SMART_CONFIG_ENABLED=
CONFIG_AIRKISS_CONFIG_ENABLED=

#
# Partition Table
#
CONFIG_PARTITION_TABLE_SINGLE_APP=
CONFIG_PARTITION_TABLE_TWO_OTA=
CONFIG_PARTITION_TABLE_CUSTOM=y
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
CONFIG_PARTITION_TABLE_OFFSET=0x8000
CONFIG_PARTITION_TABLE_FILENAME="partitions.csv"

#
# Compiler options
#
CONFIG_OPTIMIZATION_LEVEL_DEBUG=y
CONFIG_OPTIMIZATION_LEVEL_RELEASE=
CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=
CONFIG_OPTIMIZATION_ASSERTIONS_SILENT=y
CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED=
CONFIG_CXX_EXCEPTIONS=
CONFIG_STACK_CHECK_NONE=y
CONFIG_STACK_CHECK_NORM=
CONFIG_STACK_CHECK_STRONG=
CONFIG_STACK_CHECK_ALL=
CONFIG_STACK_CHECK=

#
# Component config
#

#
# App update
#
CONFIG_APP_UPDATE_CHECK_APP_SUM=y
CONFIG_APP_UPDATE_CHECK_APP_HASH=
CONFIG_AWS_IOT_SDK=

#
# ESP8266-specific
#
CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y
CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF=
CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR=
CONFIG_ESP_FILENAME_MACRO_NO_PATH=y
CONFIG_ESP_FILENAME_MACRO_RAW=
CONFIG_ESP_FILENAME_MACRO_NULL=
CONFIG_USING_NEW_ETS_VPRINTF=y
CONFIG_LINK_ETS_PRINTF_TO_IRAM=
CONFIG_SOC_FULL_ICACHE=
CONFIG_SOC_IRAM_SIZE=0xC000
CONFIG_CONSOLE_UART_DEFAULT=y
CONFIG_CONSOLE_UART_CUSTOM=
CONFIG_CONSOLE_UART_NONE=
CONFIG_CONSOLE_UART_NUM=0
CONFIG_CONSOLE_UART_BAUDRATE=115200
CONFIG_UART0_SWAP_IO=
CONFIG_MAIN_TASK_STACK_SIZE=3584
CONFIG_TASK_WDT=y
CONFIG_TASK_WDT_PANIC=y
CONFIG_TASK_WDT_TIMEOUT_13N=
CONFIG_TASK_WDT_TIMEOUT_14N=
CONFIG_TASK_WDT_TIMEOUT_15N=y
CONFIG_TASK_WDT_TIMEOUT_S=15
CONFIG_RESET_REASON=y
CONFIG_WIFI_PPT_TASKSTACK_SIZE=2048
CONFIG_EVENT_LOOP_STACK_SIZE=2048
CONFIG_ESP8266_CORE_GLOBAL_DATA_LINK_IRAM=y
CONFIG_CRYSTAL_USED_26MHZ=y
CONFIG_CRYSTAL_USED_40MHZ=
CONFIG_ESP8266_OTA_FROM_OLD=
CONFIG_ESP8266_BOOT_COPY_APP=

#
# WIFI
#
CONFIG_SCAN_AP_MAX=32
CONFIG_WIFI_TX_RATE_SEQUENCE_FROM_HIGH=y

#
# PHY
#
CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y
CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION=

#
# FreeRTOS
#
CONFIG_FREERTOS_ENABLE_REENT=
CONFIG_FREERTOS_HZ=1000
CONFIG_FREERTOS_MAX_HOOK=2
CONFIG_FREERTOS_ISR_STACKSIZE=1536
CONFIG_FREERTOS_GLOBAL_DATA_LINK_IRAM=y
CONFIG_FREERTOS_TIMER_STACKSIZE=2048
CONFIG_ENABLE_FREERTOS_SLEEP=

#
# libsodium
#
CONFIG_LIBSODIUM_USE_MBEDTLS_SHA=y

#
# Log output
#
CONFIG_LOG_DEFAULT_LEVEL_NONE=
CONFIG_LOG_DEFAULT_LEVEL_ERROR=y
CONFIG_LOG_DEFAULT_LEVEL_WARN=
CONFIG_LOG_DEFAULT_LEVEL_INFO=
CONFIG_LOG_DEFAULT_LEVEL_DEBUG=
CONFIG_LOG_DEFAULT_LEVEL_VERBOSE=
CONFIG_LOG_DEFAULT_LEVEL=1
CONFIG_LOG_COLORS=y
CONFIG_LOG_SET_LEVEL=

#
# LWIP
#
CONFIG_LWIP_USE_IRAM=
CONFIG_LWIP_HIGH_THROUGHPUT=
CONFIG_LWIP_GLOBAL_DATA_LINK_IRAM=y
CONFIG_TCPIP_RECVMBOX_SIZE=32

#
# ARP
#
CONFIG_LWIP_ARP_TABLE_SIZE=10
CONFIG_LWIP_ARP_MAXAGE=300

#
# SOCKET
#
CONFIG_LWIP_IPV6_MLD_SOCK=y
CONFIG_LWIP_SOCKET_MULTITHREAD=y
CONFIG_SET_SOLINGER_DEFAULT=y
CONFIG_ESP_UDP_SYNC_SEND=y
CONFIG_ESP_UDP_SYNC_RETRY_MAX=5
CONFIG_LWIP_MAX_SOCKETS=6
CONFIG_LWIP_SO_REUSE=y
CONFIG_LWIP_SO_REUSE_RXTOALL=y
CONFIG_LWIP_SO_RCVBUF=y
CONFIG_LWIP_RECV_BUFSIZE_DEFAULT=11680
CONFIG_LWIP_TCP_CLOSE_TIMEOUT_MS_DEFAULT=10000
CONFIG_LWIP_IP_FRAG=
CONFIG_LWIP_IP_REASSEMBLY=
CONFIG_LWIP_IP_REASS_MAX_PBUFS=10
CONFIG_LWIP_IP_SOF_BROADCAST=
CONFIG_LWIP_IP_SOF_BROADCAST_RECV=
CONFIG_LWIP_ICMP=y
CONFIG_LWIP_MULTICAST_PING=
CONFIG_LWIP_BROADCAST_PING=
CONFIG_LWIP_RAW=

#
# DHCP
#
CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y
CONFIG_LWIP_DHCP_MAX_NTP_SERVERS=3
CONFIG_LWIP_DHCPS_LEASE_UNIT=60
CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8
CONFIG_LWIP_ESP_DHCP_OPTION=
CONFIG_LWIP_AUTOIP=
CONFIG_LWIP_IGMP=y
CONFIG_DNS_MAX_SERVERS=2
CONFIG_LWIP_NETIF_LOOPBACK=

#
# TCP
#
CONFIG_TCP_HIGH_SPEED_RETRANSMISSION=
CONFIG_LWIP_MAX_ACTIVE_TCP=5
CONFIG_LWIP_MAX_LISTENING_TCP=8
CONFIG_TCP_MAXRTX=6
CONFIG_TCP_SYNMAXRTX=3
CONFIG_TCP_MSS=1460
CONFIG_TCP_SND_BUF_DEFAULT=2920
CONFIG_TCP_WND_DEFAULT=5840
CONFIG_TCP_RECVMBOX_SIZE=6
CONFIG_TCP_QUEUE_OOSEQ=
CONFIG_TCP_OVERSIZE_MSS=y
CONFIG_TCP_OVERSIZE_QUARTER_MSS=
CONFIG_TCP_OVERSIZE_DISABLE=
CONFIG_LWIP_TCP_TIMESTAMPS=

#
# UDP
#
CONFIG_LWIP_MAX_UDP_PCBS=4
CONFIG_UDP_RECVMBOX_SIZE=6
CONFIG_TCPIP_TASK_STACK_SIZE=2048

#
# LWIP RAW API
#
CONFIG_LWIP_MAX_RAW_PCBS=4
CONFIG_LWIP_IPV6=y
CONFIG_LWIP_IPV6_NUM_ADDRESSES=3
CONFIG_LWIP_IPV6_FORWARD=
CONFIG_LWIP_IPV6_FRAG=
CONFIG_LWIP_ND6_RDNSS_MAX_DNS_SERVERS=
CONFIG_LWIP_STATS=
CONFIG_ESP_LWIP_MEM_DBG=
CONFIG_LWIP_DEBUG=

#
# mDNS
#
CONFIG_ENABLE_MDNS=

#
# MQTT(Paho)
#
CONFIG_V3_1=y
CONFIG_V3_1_1=
CONFIG_DEFAULT_MQTT_VERSION=3
CONFIG_MQTT_CLIENT_ID="espressif_sample"
CONFIG_MQTT_KEEP_ALIVE=30
CONFIG_MQTT_USERNAME="espressif"
CONFIG_MQTT_PASSWORD="admin"
CONFIG_CLEAN_SESSION=y
CONFIG_KEEP_SESSION=
CONFIG_DEFAULT_MQTT_SESSION=1
CONFIG_NO_TLS=y
CONFIG_TLS_VERIFY_NONE=
CONFIG_TLS_VERIFY_PEER=
CONFIG_TLS_VERIFY_CLIENT=
CONFIG_DEFAULT_MQTT_SECURITY=0
CONFIG_MQTT_SEND_BUFFER=2048
CONFIG_MQTT_RECV_BUFFER=2048
CONFIG_MQTT_SEND_CYCLE=30000
CONFIG_MQTT_RECV_CYCLE=0
CONFIG_MQTT_PING_TIMEOUT=3000

#
# Newlib
#
CONFIG_NEWLIB_ENABLE=y
CONFIG_NEWLIB_LIBRARY_LEVEL_NORMAL=
CONFIG_NEWLIB_LIBRARY_LEVEL_NANO=y

#
# PThreads
#
CONFIG_ENABLE_PTHREAD=
CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5
CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072

#
# SSL
#
CONFIG_SSL_USING_MBEDTLS=y
CONFIG_SSL_USING_AXTLS=
CONFIG_SSL_USING_WOLFSSL=

#
# mbedTLS
#
CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=2560
CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=2560
CONFIG_MBEDTLS_RSA_BITLEN_1024=
CONFIG_MBEDTLS_RSA_BITLEN_2048=y
CONFIG_MBEDTLS_RSA_BITLEN_MIN=2048
CONFIG_MBEDTLS_DEBUG=
CONFIG_MBEDTLS_HAVE_TIME=y
CONFIG_MBEDTLS_HAVE_TIME_DATE=
CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=
CONFIG_MBEDTLS_TLS_SERVER_ONLY=
CONFIG_MBEDTLS_TLS_CLIENT_ONLY=y
CONFIG_MBEDTLS_TLS_DISABLED=
CONFIG_MBEDTLS_TLS_CLIENT=y
CONFIG_MBEDTLS_TLS_ENABLED=y

#
# TLS Key Exchange Methods
#
CONFIG_MBEDTLS_PSK_MODES=y
CONFIG_MBEDTLS_KEY_EXCHANGE_PSK=y
CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_PSK=
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_PSK=
CONFIG_MBEDTLS_KEY_EXCHANGE_RSA_PSK=y
CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA=
CONFIG_MBEDTLS_SSL_RENEGOTIATION=
CONFIG_MBEDTLS_SSL_PROTO_SSL3=
CONFIG_MBEDTLS_SSL_PROTO_TLS1=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y
CONFIG_MBEDTLS_SSL_PROTO_DTLS=
CONFIG_MBEDTLS_SSL_ALPN=
CONFIG_MBEDTLS_CIPHER_MODE_CTR=
CONFIG_MBEDTLS_SSL_SESSION_TICKETS=

#
# Symmetric Ciphers
#
CONFIG_MBEDTLS_AES_C=y
CONFIG_MBEDTLS_CAMELLIA_C=
CONFIG_MBEDTLS_DES_C=
CONFIG_MBEDTLS_RC4_DISABLED=y
CONFIG_MBEDTLS_RC4_ENABLED_NO_DEFAULT=
CONFIG_MBEDTLS_RC4_ENABLED=
CONFIG_MBEDTLS_BLOWFISH_C=
CONFIG_MBEDTLS_XTEA_C=y
CONFIG_MBEDTLS_CCM_C=
CONFIG_MBEDTLS_GCM_C=
CONFIG_MBEDTLS_RIPEMD160_C=

#
# Certificates
#
CONFIG_MBEDTLS_PEM_PARSE_C=y
CONFIG_MBEDTLS_PEM_WRITE_C=y
CONFIG_MBEDTLS_X509_CRL_PARSE_C=y
CONFIG_MBEDTLS_X509_CSR_PARSE_C=y
CONFIG_MBEDTLS_ECP_C=
CONFIG_MBEDTLS_DHM_C=y

#
# OpenSSL
#
CONFIG_OPENSSL_DEBUG=
CONFIG_OPENSSL_ASSERT_DO_NOTHING=y
CONFIG_OPENSSL_ASSERT_EXIT=

#
# tcpip adapter
#
CONFIG_IP_LOST_TIMER_INTERVAL=120
CONFIG_TCPIP_ADAPTER_GLOBAL_DATA_LINK_IRAM=y

#
# wpa_supplicant
#
CONFIG_LTM_FAST=y