Update README.md

README.md

@@ -1,31 +1,4 @@
-Do not use this Firmware yet if you dont know what you do. It's unfinished and has bugs.
-
-# Mods in work:
-- [Complete menu rework](http://imgur.com/VQiZ4BC) (50% done):
-  - [New leveling assistant (base work by nepeee)](http://i.imgur.com/D5bKZYu.png)
-  - [Overhauled move menu](http://i.imgur.com/48AXclL.png)
-
-- LCD Brightness Control (change the brightness of the lcd)
-- LCD "lockscreen mode" (lcd dims after some time and first touch "wakes" it again and doesnt activate buttons. No more accidental print interupts!)
-
-# Mods Planned:
-- Multiple preheat profiles with different temperatures (hotend/bed)
-- Subfolder support for sdcard
-
-# Installation:
-
-LCD Firmware:
-
-http://www.wanhao3dprinter.com/FAQ/ShowArticle.asp?ArticleID=79
-
-Printer Firmware:
-
-Download Arduino 1.6.4 from the [arduino website](https://www.arduino.cc/en/main/OldSoftwareReleases). (Doesnt compile with newest version)
-Connect printer to pc. If you have trouble with drivers look [here](http://3dprinterwiki.info/wiki/wanhao-duplicator-i3-plus/wanhao-i3-plus-documentation-factory-files/ch340x-driver-information/).
-Load Marlin.ino with Arduino. Select Arduino Mega under Tools->Boards.
-Check the sketch with the ✔ button. If no errors show up upload the sketch to your printer.
-
-If anything goes wrong, you can get the stock firmware files from [here](http://www.wanhao3dprinter.com/FAQ/ShowArticle.asp?ArticleID=79)
+Info here: https://silverquark.github.io/i3PlusPlusSite/
 
 # Usefull development links:
 
@@ -37,35 +10,13 @@ LCD Manufraturer (contains sdk, datasheets, drivers and more):
 
 http://dwin.com.cn/english/products/bt-72876584214435.html
 
-
 # Disclaimer
 
 I'm not responsible for any damage done to your printer or lcd.
 
-# Things i noticed:
-
-It looks like there are different versions of the screen in circulation. Mine is "DMT48270M050_06W". [But i found screenshots of others with different versions](https://i2.wp.com/3dprinterwiki.info/wp-content/uploads/2016/09/IMG_8041.jpeg). I think they should all be compatible, but if it's not working on your screen, this may or may not be the cause.
-
-
+Based on i3Extra by nepeee
 
-# Based on i3Extra by nepeee:
-
-This is a modified version of the Marlin 1.1.0-RC8 firmware for the WANHAO Duplicator i3 Plus 3d printer.
+This is a modified version of the Marlin 1.1.1 firmware for the WANHAO Duplicator i3 Plus 3d printer.
 Currently it's in alpha state, same lcd functions are working and some of them is not.
 
-Changelog Marlin:
-- Added the printer specific pin and machine configuration files
-- Switched to the Arduino serial port lib to add a second serial for the lcd
-- Added the completely rewritten lcd communication functions
-- Added a serial bridge mode for lcd firmware update over the printers usb port
-
-Changelog LCD:
-- Removed the chinese language
-- Renamed all the bitmaps to fix the firmware update problem caused by the chines characters
-- Removed some start animation frames
-- Added the lcd update bridge mode button to the system menu
-- Added Marlin and a LCD firmware version display functions to the system menu 
-- Changed the bed leveling menu to a usable version
-- Swapped and rearranged some buttons in the system/tool menus
-
 If you like to help us to make a better software for the printer don't hesitate to contribute in this project!