update to version 1.3.1 (#12)

Author: tgauth

CMakeLists.txt

@@ -3,7 +3,9 @@ set(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS ON)
 
 project(zlib C)
 
-set(VERSION "1.3")
+set(VERSION "1.3.1")
+
+option(ZLIB_BUILD_EXAMPLES "Enable Zlib Examples" ON)
 
 set(INSTALL_BIN_DIR "${CMAKE_INSTALL_PREFIX}/bin" CACHE PATH "Installation directory for executables")
 set(INSTALL_LIB_DIR "${CMAKE_INSTALL_PREFIX}/lib" CACHE PATH "Installation directory for libraries")
@@ -148,7 +150,9 @@ if(MINGW)
 endif(MINGW)
 
 add_library(zlib SHARED ${ZLIB_SRCS} ${ZLIB_DLL_SRCS} ${ZLIB_PUBLIC_HDRS} ${ZLIB_PRIVATE_HDRS})
+target_include_directories(zlib PUBLIC ${CMAKE_CURRENT_BINARY_DIR} ${CMAKE_CURRENT_SOURCE_DIR})
 add_library(zlibstatic STATIC ${ZLIB_SRCS} ${ZLIB_PUBLIC_HDRS} ${ZLIB_PRIVATE_HDRS})
+target_include_directories(zlibstatic PUBLIC ${CMAKE_CURRENT_BINARY_DIR} ${CMAKE_CURRENT_SOURCE_DIR})
 set_target_properties(zlib PROPERTIES DEFINE_SYMBOL ZLIB_DLL)
 set_target_properties(zlib PROPERTIES SOVERSION 1)
 
@@ -166,7 +170,7 @@ endif()
 if(UNIX)
     # On unix-like platforms the library is almost always called libz
    set_target_properties(zlib zlibstatic PROPERTIES OUTPUT_NAME z)
-   if(NOT APPLE)
+   if(NOT APPLE AND NOT(CMAKE_SYSTEM_NAME STREQUAL AIX))
      set_target_properties(zlib PROPERTIES LINK_FLAGS "-Wl,--version-script,\"${CMAKE_CURRENT_SOURCE_DIR}/zlib.map\"")
    endif()
 elseif(BUILD_SHARED_LIBS AND WIN32)
@@ -193,21 +197,22 @@ endif()
 #============================================================================
 # Example binaries
 #============================================================================
-
-add_executable(example test/example.c)
-target_link_libraries(example zlib)
-add_test(example example)
-
-add_executable(minigzip test/minigzip.c)
-target_link_libraries(minigzip zlib)
-
-if(HAVE_OFF64_T)
-    add_executable(example64 test/example.c)
-    target_link_libraries(example64 zlib)
-    set_target_properties(example64 PROPERTIES COMPILE_FLAGS "-D_FILE_OFFSET_BITS=64")
-    add_test(example64 example64)
-
-    add_executable(minigzip64 test/minigzip.c)
-    target_link_libraries(minigzip64 zlib)
-    set_target_properties(minigzip64 PROPERTIES COMPILE_FLAGS "-D_FILE_OFFSET_BITS=64")
+if(ZLIB_BUILD_EXAMPLES)
+    add_executable(example test/example.c)
+    target_link_libraries(example zlib)
+    add_test(example example)
+
+    add_executable(minigzip test/minigzip.c)
+    target_link_libraries(minigzip zlib)
+
+    if(HAVE_OFF64_T)
+        add_executable(example64 test/example.c)
+        target_link_libraries(example64 zlib)
+        set_target_properties(example64 PROPERTIES COMPILE_FLAGS "-D_FILE_OFFSET_BITS=64")
+        add_test(example64 example64)
+
+        add_executable(minigzip64 test/minigzip.c)
+        target_link_libraries(minigzip64 zlib)
+        set_target_properties(minigzip64 PROPERTIES COMPILE_FLAGS "-D_FILE_OFFSET_BITS=64")
+    endif()
 endif()

ChangeLog

@@ -1,6 +1,16 @@
 
                 ChangeLog file for zlib
 
+Changes in 1.3.1 (22 Jan 2024)
+- Reject overflows of zip header fields in minizip
+- Fix bug in inflateSync() for data held in bit buffer
+- Add LIT_MEM define to use more memory for a small deflate speedup
+- Fix decision on the emission of Zip64 end records in minizip
+- Add bounds checking to ERR_MSG() macro, used by zError()
+- Neutralize zip file traversal attacks in miniunz
+- Fix a bug in ZLIB_DEBUG compiles in check_match()
+- Various portability and appearance improvements
+
 Changes in 1.3 (18 Aug 2023)
 - Remove K&R function definitions and zlib2ansi
 - Fix bug in deflateBound() for level 0 and memLevel 9

FAQ

@@ -14,8 +14,7 @@ The latest zlib FAQ is at http://zlib.net/zlib_faq.html
  2. Where can I get a Windows DLL version?
 
     The zlib sources can be compiled without change to produce a DLL.  See the
-    file win32/DLL_FAQ.txt in the zlib distribution.  Pointers to the
-    precompiled DLL are found in the zlib web site at http://zlib.net/ .
+    file win32/DLL_FAQ.txt in the zlib distribution.
 
  3. Where can I get a Visual Basic interface to zlib?
 

Makefile.in

@@ -1,5 +1,5 @@
 # Makefile for zlib
-# Copyright (C) 1995-2017 Jean-loup Gailly, Mark Adler
+# Copyright (C) 1995-2024 Jean-loup Gailly, Mark Adler
 # For conditions of distribution and use, see copyright notice in zlib.h
 
 # To compile and test, type:
@@ -22,13 +22,13 @@ CFLAGS=-O
 
 SFLAGS=-O
 LDFLAGS=
-TEST_LDFLAGS=$(LDFLAGS) -L. libz.a
+TEST_LIBS=-L. libz.a
 LDSHARED=$(CC)
 CPP=$(CC) -E
 
 STATICLIB=libz.a
 SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.3
+SHAREDLIBV=libz.so.1.3.1
 SHAREDLIBM=libz.so.1
 LIBS=$(STATICLIB) $(SHAREDLIBV)
 
@@ -282,10 +282,10 @@ placebo $(SHAREDLIBV): $(PIC_OBJS) libz.a
 	-@rmdir objs
 
 example$(EXE): example.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ example.o $(TEST_LDFLAGS)
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ example.o $(TEST_LIBS)
 
 minigzip$(EXE): minigzip.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ minigzip.o $(TEST_LDFLAGS)
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ minigzip.o $(TEST_LIBS)
 
 examplesh$(EXE): example.o $(SHAREDLIBV)
 	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS) -L. $(SHAREDLIBV)
@@ -294,10 +294,10 @@ minigzipsh$(EXE): minigzip.o $(SHAREDLIBV)
 	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS) -L. $(SHAREDLIBV)
 
 example64$(EXE): example64.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ example64.o $(TEST_LDFLAGS)
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ example64.o $(TEST_LIBS)
 
 minigzip64$(EXE): minigzip64.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ minigzip64.o $(TEST_LDFLAGS)
+	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ minigzip64.o $(TEST_LIBS)
 
 install-libs: $(LIBS)
 	-@if [ ! -d $(DESTDIR)$(exec_prefix)  ]; then mkdir -p $(DESTDIR)$(exec_prefix); fi
@@ -360,7 +360,7 @@ zconf: $(SRCDIR)zconf.h.in
 	cp -p $(SRCDIR)zconf.h.in zconf.h
 
 minizip-test: static
-	cd contrib/minizip && { CFLAGS="$(CFLAGS)" $(MAKE) test ; cd ../.. ; }
+	cd contrib/minizip && { CC="$(CC)" CFLAGS="$(CFLAGS)" $(MAKE) test ; cd ../.. ; }
 
 minizip-clean:
 	cd contrib/minizip && { $(MAKE) clean ; cd ../.. ; }

README

@@ -1,6 +1,6 @@
 ZLIB DATA COMPRESSION LIBRARY
 
-zlib 1.3 is a general purpose data compression library.  All the code is
+zlib 1.3.1 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
 http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
@@ -31,7 +31,7 @@ Mark Nelson <[email protected]> wrote an article about zlib for the Jan.  1997
 issue of Dr.  Dobb's Journal; a copy of the article is available at
 https://marknelson.us/posts/1997/01/01/zlib-engine.html .
 
-The changes made in version 1.3 are documented in the file ChangeLog.
+The changes made in version 1.3.1 are documented in the file ChangeLog.
 
 Unsupported third party contributions are provided in directory contrib/ .
 
@@ -83,7 +83,7 @@ Acknowledgments:
 
 Copyright notice:
 
- (C) 1995-2023 Jean-loup Gailly and Mark Adler
+ (C) 1995-2024 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages

configure

@@ -25,7 +25,7 @@ if test $SRCDIR = "."; then
     ZINCOUT="-I."
     SRCDIR=""
 else
-    ZINC='-include zconf.h'
+    ZINC='-I. -include zconf.h'
     ZINCOUT='-I. -I$(SRCDIR)'
     SRCDIR="$SRCDIR/"
 fi
@@ -44,7 +44,8 @@ STATICLIB=libz.a
 
 # extract zlib version numbers from zlib.h
 VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < ${SRCDIR}zlib.h`
-VER1=`sed -n -e '/VERSION "/s/.*"\([0-9]*\)\\..*/\1/p' < ${SRCDIR}zlib.h`
+VER3=`echo ${VER}|sed -n -e 's/\([0-9]\{1,\}\(\\.[0-9]\{1,\}\)\{1,2\}\).*/\1/p'`
+VER1=`echo ${VER}|sed -n -e 's/\([0-9]\{1,\}\)\\..*/\1/p'`
 
 # establish commands for library building
 if "${CROSS_PREFIX}ar" --version >/dev/null 2>/dev/null || test $? -lt 126; then
@@ -263,7 +264,7 @@ if test "$gcc" -eq 1 && ($cc -c $test.c) >> configure.log 2>&1; then
         SHAREDLIB=libz$shared_ext
         SHAREDLIBV=libz.$VER$shared_ext
         SHAREDLIBM=libz.$VER1$shared_ext
-        LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER"}
+        LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"}
         if "${CROSS_PREFIX}libtool" -V 2>&1 | grep Apple > /dev/null; then
             AR="${CROSS_PREFIX}libtool"
         elif libtool -V 2>&1 | grep Apple > /dev/null; then
@@ -441,7 +442,7 @@ EOF
 if test $shared -eq 1; then
   echo Checking for shared library support... | tee -a configure.log
   # we must test in two steps (cc then ld), required at least on SunOS 4.x
-  if try $CC -w -c $SFLAGS $test.c &&
+  if try $CC -c $SFLAGS $test.c &&
      try $LDSHARED $SFLAGS -o $test$shared_ext $test.o; then
     echo Building shared library $SHAREDLIBV with $CC. | tee -a configure.log
   elif test -z "$old_cc" -a -z "$old_cflags"; then

contrib/delphi/ZLib.pas

@@ -152,7 +152,7 @@ procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
   const OutBuf: Pointer; BufSize: Integer);
 
 const
-  zlib_version = '1.3.0';
+  zlib_version = '1.3.1';
 
 type
   EZlibError = class(Exception);

contrib/infback9/inftree9.c

@@ -1,5 +1,5 @@
 /* inftree9.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2023 Mark Adler
+ * Copyright (C) 1995-2024 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate9_copyright[] =
-   " inflate9 1.3 Copyright 1995-2023 Mark Adler ";
+   " inflate9 1.3.1 Copyright 1995-2024 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -59,7 +59,7 @@ int inflate_table9(codetype type, unsigned short FAR *lens, unsigned codes,
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
         130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
-        133, 133, 133, 133, 144, 198, 203};
+        133, 133, 133, 133, 144, 203, 77};
     static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
         65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,

contrib/infback9/inftree9.h

@@ -41,8 +41,8 @@ typedef struct {
    examples/enough.c found in the zlib distribution.  The arguments to that
    program are the number of symbols, the initial root table size, and the
    maximum bit length of a code.  "enough 286 9 15" for literal/length codes
-   returns returns 852, and "enough 32 6 15" for distance codes returns 594.
-   The initial root table size (9 or 6) is found in the fifth argument of the
+   returns 852, and "enough 32 6 15" for distance codes returns 594. The
+   initial root table size (9 or 6) is found in the fifth argument of the
    inflate_table() calls in infback9.c.  If the root table size is changed,
    then these maximum sizes would be need to be recalculated and updated. */
 #define ENOUGH_LENS 852

contrib/iostream3/zfstream.h

@@ -413,7 +413,7 @@ template<typename T1, typename T2>
   class gzomanip2
   {
   public:
-    // Allows insertor to peek at internals
+    // Allows inserter to peek at internals
     template <typename Ta, typename Tb>
       friend gzofstream&
       operator<<(gzofstream&,
@@ -452,7 +452,7 @@ template<typename T1, typename T2>
   : func(f), val1(v1), val2(v2)
   { }
 
-// Insertor applies underlying manipulator function to stream
+// Inserter applies underlying manipulator function to stream
 template<typename T1, typename T2>
   inline gzofstream&
   operator<<(gzofstream& s, const gzomanip2<T1,T2>& m)