Merge branch '5.16-stuff' into stage

Author: cumulusAnia

content/cumulus-linux-511/Network-Virtualization/Ethernet-Virtual-Private-Network-EVPN/Basic-Configuration.md

@@ -320,10 +320,6 @@ You only need to set the `advertise-all-vni` option on leafs that are VTEPs. The
 {{< /tab >}}
 {{< /tabs >}}
 
-{{%notice note%}}
-The switch does not export IPv6 link-local addresses as global addresses but treats them as neighbor entries in the EVPN fabric.
-{{%/notice%}}
-
 ## Show EVPN Configuration
 
 To show the current EVPN configuration on the switch, run the `nv show evpn` command:
@@ -383,3 +379,4 @@ For information about active-active VTEPs and anycast IP behavior, and for failu
 - You must configure the overlay (tenants) in a specific VRF and separate from the underlay, which resides in the default VRF. Cumulus Linux does not support layer 3 VNI mapping for the default VRF.
 - You cannot configure EVPN with {{<link title="Redistribute Neighbor" >}}. Enabling both features simultaneously causes instability in IPv4 and IPv6 neighbor entries.
 - To conform to {{<exlink url="https://tools.ietf.org/html/rfc6514#section-5" text="RFC 6514">}}, Cumulus Linux implements a stricter check on a received type-3 route to ensure that the PMSI attribute is *ingress-replication*.
+- The switch does not export IPv6 link-local addresses as global addresses but treats them as neighbor entries in the EVPN fabric.

content/cumulus-linux-512/Network-Virtualization/Ethernet-Virtual-Private-Network-EVPN/Basic-Configuration.md

@@ -322,10 +322,6 @@ You only need to set the `advertise-all-vni` option on leafs that are VTEPs. The
 {{< /tab >}}
 {{< /tabs >}}
 
-{{%notice note%}}
-The switch does not export IPv6 link-local addresses as global addresses but treats them as neighbor entries in the EVPN fabric.
-{{%/notice%}}
-
 ## Show EVPN Configuration
 
 To show the current EVPN configuration on the switch, run the `nv show evpn` command:
@@ -385,3 +381,4 @@ For information about active-active VTEPs and anycast IP behavior, and for failu
 - You must configure the overlay (tenants) in a specific VRF and separate from the underlay, which resides in the default VRF. Cumulus Linux does not support layer 3 VNI mapping for the default VRF.
 - You cannot configure EVPN with {{<link title="Redistribute Neighbor" >}}. Enabling both features simultaneously causes instability in IPv4 and IPv6 neighbor entries.
 - To conform to {{<exlink url="https://tools.ietf.org/html/rfc6514#section-5" text="RFC 6514">}}, Cumulus Linux implements a stricter check on a received type-3 route to ensure that the PMSI attribute is *ingress-replication*.
+- The switch does not export IPv6 link-local addresses as global addresses but treats them as neighbor entries in the EVPN fabric.

content/cumulus-linux-513/Network-Virtualization/Ethernet-Virtual-Private-Network-EVPN/Basic-Configuration.md

@@ -322,10 +322,6 @@ You only need to set the `advertise-all-vni` option on leafs that are VTEPs. The
 {{< /tab >}}
 {{< /tabs >}}
 
-{{%notice note%}}
-The switch does not export IPv6 link-local addresses as global addresses but treats them as neighbor entries in the EVPN fabric.
-{{%/notice%}}
-
 ## Show EVPN Configuration
 
 To show the current EVPN configuration on the switch, run the `nv show evpn` command:
@@ -385,3 +381,4 @@ For information about active-active VTEPs and anycast IP behavior, and for failu
 - You must configure the overlay (tenants) in a specific VRF and separate from the underlay, which resides in the default VRF. Cumulus Linux does not support layer 3 VNI mapping for the default VRF.
 - You cannot configure EVPN with {{<link title="Redistribute Neighbor" >}}. Enabling both features simultaneously causes instability in IPv4 and IPv6 neighbor entries.
 - To conform to {{<exlink url="https://tools.ietf.org/html/rfc6514#section-5" text="RFC 6514">}}, Cumulus Linux implements a stricter check on a received type-3 route to ensure that the PMSI attribute is *ingress-replication*.
+- The switch does not export IPv6 link-local addresses as global addresses but treats them as neighbor entries in the EVPN fabric.

content/cumulus-linux-514/Network-Virtualization/Ethernet-Virtual-Private-Network-EVPN/Basic-Configuration.md

@@ -322,10 +322,6 @@ You only need to set the `advertise-all-vni` option on leafs that are VTEPs. The
 {{< /tab >}}
 {{< /tabs >}}
 
-{{%notice note%}}
-The switch does not export IPv6 link-local addresses as global addresses but treats them as neighbor entries in the EVPN fabric.
-{{%/notice%}}
-
 ## Show EVPN Configuration
 
 To show the current EVPN configuration on the switch, run the `nv show evpn` command:
@@ -385,3 +381,4 @@ For information about active-active VTEPs and anycast IP behavior, and for failu
 - You must configure the overlay (tenants) in a specific VRF and separate from the underlay, which resides in the default VRF. Cumulus Linux does not support layer 3 VNI mapping for the default VRF.
 - You cannot configure EVPN with {{<link title="Redistribute Neighbor" >}}. Enabling both features simultaneously causes instability in IPv4 and IPv6 neighbor entries.
 - To conform to {{<exlink url="https://tools.ietf.org/html/rfc6514#section-5" text="RFC 6514">}}, Cumulus Linux implements a stricter check on a received type-3 route to ensure that the PMSI attribute is *ingress-replication*.
+- The switch does not export IPv6 link-local addresses as global addresses but treats them as neighbor entries in the EVPN fabric.

content/cumulus-linux-515/Network-Virtualization/Ethernet-Virtual-Private-Network-EVPN/Basic-Configuration.md

@@ -322,10 +322,6 @@ You only need to set the `advertise-all-vni` option on leafs that are VTEPs. The
 {{< /tab >}}
 {{< /tabs >}}
 
-{{%notice note%}}
-The switch does not export IPv6 link-local addresses as global addresses but treats them as neighbor entries in the EVPN fabric.
-{{%/notice%}}
-
 ## Show EVPN Configuration
 
 To show the current EVPN configuration on the switch, run the `nv show evpn` command:
@@ -385,3 +381,4 @@ For information about active-active VTEPs and anycast IP behavior, and for failu
 - You must configure the overlay (tenants) in a specific VRF and separate from the underlay, which resides in the default VRF. Cumulus Linux does not support layer 3 VNI mapping for the default VRF.
 - You cannot configure EVPN with {{<link title="Redistribute Neighbor" >}}. Enabling both features simultaneously causes instability in IPv4 and IPv6 neighbor entries.
 - To conform to {{<exlink url="https://tools.ietf.org/html/rfc6514#section-5" text="RFC 6514">}}, Cumulus Linux implements a stricter check on a received type-3 route to ensure that the PMSI attribute is *ingress-replication*.
+- The switch does not export IPv6 link-local addresses as global addresses but treats them as neighbor entries in the EVPN fabric.

content/cumulus-linux-516/Network-Virtualization/Ethernet-Virtual-Private-Network-EVPN/Basic-Configuration.md

@@ -322,10 +322,6 @@ You only need to set the `advertise-all-vni` option on leafs that are VTEPs. The
 {{< /tab >}}
 {{< /tabs >}}
 
-{{%notice note%}}
-The switch does not export IPv6 link-local addresses as global addresses but treats them as neighbor entries in the EVPN fabric.
-{{%/notice%}}
-
 ## Show EVPN Configuration
 
 To show the current EVPN configuration on the switch, run the `nv show evpn` command:
@@ -385,3 +381,4 @@ For information about active-active VTEPs and anycast IP behavior, and for failu
 - You must configure the overlay (tenants) in a specific VRF and separate from the underlay, which resides in the default VRF. Cumulus Linux does not support layer 3 VNI mapping for the default VRF.
 - You cannot configure EVPN with {{<link title="Redistribute Neighbor" >}}. Enabling both features simultaneously causes instability in IPv4 and IPv6 neighbor entries.
 - To conform to {{<exlink url="https://tools.ietf.org/html/rfc6514#section-5" text="RFC 6514">}}, Cumulus Linux implements a stricter check on a received type-3 route to ensure that the PMSI attribute is *ingress-replication*.
+- The switch does not export IPv6 link-local addresses as global addresses but treats them as neighbor entries in the EVPN fabric.