Esp32 + SN74AHCT125

[AstaRom]

Note

This page describes an example of assembling a driver for an LED strip with a level shifter 3.3 -> 5V

Software:

• HyperHDR
• HyperSPI

---

Led driver:

• ⤴️ ESP32 MH-ET Live, CH9102X

Level shifter:

• ⤴️ SN74AHCT125N

Additional items:

• ⤴️ breadboard, 4x6
• ⤴️ round pin header 2.54mm (type "Female ")
• ⤴️ board socket straight (10 pin, type "Female")
• ⤴️ pin plug 2.54mm (type "Male")

---

---

• the board 'esp32' was powered via micro-USB;
• the 'level shifter' received power from the 'LED strip' power supply;
• common ground line between 'SN74AHCT125N', 'LED strip', 'esp32' board and 'Raspberry Pi'.

Esp32	-	Raspberry Pi GPIO
GND	GND	GND / PIN 20
GPIO 18	SCK	GPIO 11 / PIN 23
GPIO 23	MOSI	GPIO 10 / PIN 19
GPIO 5	CE0	GPIO 8 / PIN 24

---

#HyperHDR, #HyperSPI, #Level shifter, #Ambilight, #Ambilight DIY, #DIY Ambilight, #Ambilight
#ESP32, #ESP32 MH-ET Live, #CH9102X, #74AHCT125, #SN74AHCT125, #SN74AHCT125N