Confirmed working on...

[007revad]

Comment here with your Synology model and DSM version so I can update the Confirmed working on list.

[marmurek]

Working on DS218 @ DSM 7.2.1-69057 Update 3

[marcocarraro]

Message from terminal:
ContainerManager_for_all_armv8 v1.2.4
DS218j-j DSM 7.2.1-69057-4
synology_armada38x_ds218j

You don't need this script. Container Manager is available
in Package Center for your synology_armada38x_ds218j

Unfortunately the package is not present in Package Center instead.

[marcocarraro]

Hi, thanks for the feedback, the command gives me:
armv7l

[marcocarraro]

And here is the error message running the v1.3.5
_ContainerManager_for_all_armv8 v1.3.5
DS218j-j DSM 7.2.1-69057-4
synology_armada38x_ds218j

You don't need this script. Container Manager is available
in Package Center for your synology_armada38x_ds218j

ContainerManager is not installed

Line 127: ERROR Installing ContainerManager on /volume1 failed!
progstatus called from package_install line 247
Restoring synoinfo.conf_

[007revad]

the command gives me:
armv7l

After a bit of research I've found that the DS218j has a 32 bit CPU. Container Manager only installs on Synology NAS with a 64 bit CPU.

Marvell have some confusing CPU architecture naming:

• armada38x is 32 bit armv7
• armada37xx is 64 bit armv8

So Container Manager won't install or run on the following models which have a 32 bit CPU:

DS419slim
DS218j
RS217
RS816
DS416slim
DS416j
DS216j
DS216
DS116

[marcocarraro]

I can "read through the lines" it is not working and it never will, right? :_(

[007revad]

Correct, unfortunately.

[Dchris832]

Working on DS218 @7.2.1-69057 Update 5

[Maxim-Mestdagh]

Working on DS218play with DSM 7.2.1-69057 Update 5, thanks you

[Grafyan]

Working on DS418j with DSM 7.2.1-69057 Update 5, thank you for your work :D

[Aitors30]

Hi, Installed in DS218Play but not Starting. DSM 7.2.2-72806. I don't know if the new 7.2.2 version affect to the Container packet.

Thanks in advance.

[Aitors30]

Ok, autoreply.... i need to be a Root user to do. forgot to put "sudo -i" before execute the script. Now it's work.

[Plantacom]

Hi. After login to root user the command line shows: root@'yourDSname':~# ?
And then what is the exact command line you put?
For me no matter what is write the reply is: No such file or directory. I have put the install_container_manager.sh file into the /music folder...

[007revad]

@Plantacom
Try:

/volume1/music/install_container_manager.sh

or:

/volume1/music/ContainerManager_for_all_armv8/install_container_manager.sh

[Plantacom]

Hi. THX! Adding /volume1 to the line works.
But have no clue (knowledge) why.... :)

[dantasan]

Working on DS119j (MARVELL Armada 3720 88F3720) with DSM 7.2.2-72806 Update 2
Thanks a lot for your script and work!
All the best from Austria!

[ThijsZijdel]

Working on DS218play @ DSM 7.2.1-69057 Update 6

[nsenica]

Working great on DS218Play with DSM 7.2.2-72806 Update 3, the only caveat is if by any chance there's a power failure, Container Manager will not start, complains that it needs to be repaired and NAS needs to be rebooted for Container Manager to start properly. If there's anything I can provide to track this down, let me know.

[Tom8867]

Had the same issue after a power loss, had to uninstall and used the opportunity to install ContainerManager-armv8-24.0.2-1543, but after that I had to add my project again.

[christopherblack2012]

Working on DS418 with DSM 7.2.2-72806 Update 3. Took a few attempts to get it to work, but appears to work fine now. Thanks!

[Tom8867]

Working on Synology DS418
DSM Version: DSM 7.2.2-72806 Update 3
Container Manager: ContainerManager-armv8-24.0.2-1543, released June 20, 2025